ISO 10303-23:2000

Industrial automation systems and integration — Product data representation and exchange — Part 23: Implementation methods: C++ language binding to the standard data access interface

This part of ISO 10303 specifies the implementation of the functional interface specified in the standard data access interface (SDAI), ISO 10303-22, in the C++ programming language. The following are within the scope of this part of ISO 10303: — access to and manipulation of data types and entities which are specified in ISO 10303-22; — convenience functions suitable to this language binding; — binding of functions to operations and attributes specified in ISO 10303-22 with the linking of application schema definition at either compile-time or run-time; — implementation mechanisms for the handling of errors as specified in ISO 10303-22; — implementation mechanisms for the validation of constraints as specified in ISO 10303-22. The following is outside the scope of this part of ISO 10303: — all items listed as out of scope in ISO 10303-22.

Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 23: Méthodes de mise en application: Liant de langage C++ à l'interface d'accès aux données normalisées

General Information

• Status: Published
• Publication Date: 20-Dec-2000
• ICS: 25.040.40 - Industrial process measurement and control
• Technical Committee: ISO/TC 184/SC 4 - Industrial data
• Drafting Committee: ISO/TC 184/SC 4/WG 11 - Implementation methods and conformance methods
• Current Stage: 9060 - Close of review
• Start Date: 04-Mar-2029

Relations

• Consolidated By: ISO 21809-2:2007 - Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Fusion-bonded epoxy coatings
• Effective Date: 06-Jun-2022

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 10303-23
First edition
2000-12-01
Industrial automation systems and
integration — Product data representation
and exchange —
Part 23:
Implementation methods: C++ language
binding to the standard data access
interface
Systèmes d'automatisation industrielle et intégration — Représentation et
échange de données de produits —
Partie 23: Méthodes de mise en application: Liant de langage C++ à
l'interface d'accès aux données normalisées
Reference number
ISO 10303-23:2000(E)
©
ISO 2000

---------------------- Page: 1 ----------------------
ISO 10303-23:2000(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2000
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland
ii © ISO 2000 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 10303-23:2000 (E)
Contents
Page
1 Scope . 1
2 Normative references . 1
3 Definitions and abbreviations . 2
3.1 Definitions . 2
3.1.1 Terms defined in ISO 10303-1 . 2
3.1.2 Terms defined in ISO 10303-11 . 3
3.1.3 Terms defined in ISO 10303-22 . 3
3.1.4 Terms defined in The Annotated C++ Reference Manual . 4
3.1.5 Term defined in IEEE standard . 5
3.1.6 Other definitions . 5
3.2 Abbreviations . 6
3.3 Typographical conventions . 6
4 Overall requirements . 6
4.1 Characteristics of the binding functions . 6
4.2 Language specific features . 8
4.2.1 Names of types and operations . 8
4.2.2 Memory management . 8
4.3 Binding styles . 8
5 Constants and data type definitions and global functions . 9
5.1 SDAI namespace . 9
5.2 EXPRESS built-in constants . 9
5.3 EXPRESS attribute data types . 10
5.3.1 Primitive data types . 10
5.3.2 Aggregate and iterator data types . 18
5.3.3 Enumeration data type . 20
5.3.4 Select data type . 22
5.3.5 Number data type . 28
5.3.6 Handles . 28
5.3.7 TYPE data type . 29
5.3.8 ENTITY data type . 30
5.3.9 Entity instance . 32
5.3.10 Persistent data and persistent object identifiers . 35
5.3.11 Domain equivalence for early binding . 42
5.3.12 Application instance . 43
5.3.13 Binding-specific data types .
...