ISO/TS 10303-35:2003

Industrial automation systems and integration — Product data representation and exchange — Part 35: Conformance testing methodology and framework: Abstract test methods for standard data access interface (SDAI) implementations

ISO/TS 10303-35:2003 specifies the abstract test methods and requirements for conformance testing of an implementation of a language binding of the Standard Data Access Interface (SDAI). Since the SDAI is specified independently of any programming language, the abstract test methods presented in ISO/TS 10303-35:2003 are applicable to all SDAI language bindings. The abstract test methods support as well the various implementation classes as specified in ISO 10303-22:1998. The following are within the scope of ISO/TS 10303-35:2003: abstract test methods for software systems that implement the SDAI; the specification, in a manner that is independent of any SDAI language binding, of the methods and approaches for testing of various SDAI operations; the specification and documentation of abstract test cases. The following are outside the scope of ISO/TS 10303-35:2003: the development of test data and/or test programs for specific language bindings; the specification of test methods, algorithms, or programs for the conformance testing of applications that interact with SDAI implementations; the architecture and implementation approach for a conformance test system that realizes the test methods specified in ISO/TS 10303-35:2003.

Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 35: Méthodologie et cadre pour les essais de conformité: Méthodes d'essai abstraites pour mises en application SDAI

General Information

• Status: Published
• Publication Date: 11-Dec-2003
• ICS: 25.040.40 - Industrial process measurement and control
• Technical Committee: ISO/TC 184/SC 4 - Industrial data
• Drafting Committee: ISO/TC 184/SC 4/WG 11 - Implementation methods and conformance methods
• Current Stage: 9060 - Close of review
• Start Date: 04-Mar-2027

Relations

• Consolidated By: ISO 2503:2009 - Gas welding equipment — Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa)
• Effective Date: 06-Jun-2022

Standards Content (Sample)

TECHNICAL ISO/TS
SPECIFICATION 10303-35
First edition
2003-12-15

Industrial automation systems and
integration — Product data
representation and exchange —
Part 35:
Conformance testing methodology and
framework: Abstract test methods for
standard data access interface (SDAI)
implementations
Systèmes d'automatisation industrielle et intégration — Représentation
et échange de données de produits —
Partie 35: Méthodologie et cadre pour les essais de conformité:
Méthodes d'essai abstraites pour mises en application SDAI



Reference number
ISO/TS 10303-35:2003(E)
©
ISO 2003

---------------------- Page: 1 ----------------------
ISO/TS 10303-35:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO 2003 — All rights reserved

---------------------- Page: 2 ----------------------
ISO/TS 10303-35:2003(E)

Contents Page


1 Scope .1
2 Normative references.1
3 Terms, definitions, and abbreviations .2
3.1 Terms defined in ISO 10303-1 .2
3.2 Terms defined in ISO 10303-22 .2
3.3 Terms defined in ISO 10303-31 .3
3.4 Other terms and definitions .4
3.5 Abbreviations .4
4 Overview and characteristics .4
4.1 Testing characteristics .5
5 Testing process .5
5.1 Preparation for testing .6
5.2 Test campaign.6
5.3 Test conclusion.6
5.4 Test report production .6
6 SDAI abstract test schema .7
6.1 Introduction .7
6.2 SDAI abstract test schema function and procedure definitions .8
7 SDAI operation schema .156
7.1 SDAI operation schema constant definitions.
...

TECHNICAL ISO/TS
SPECIFICATION 10303-35
First edition
2003-12-15

Industrial automation systems and
integration — Product data
representation and exchange —
Part 35:
Conformance testing methodology and
framework: Abstract test methods for
standard data access interface (SDAI)
implementations
Systèmes d'automatisation industrielle et intégration — Représentation
et échange de données de produits —
Partie 35: Méthodologie et cadre pour les essais de conformité:
Méthodes d'essai abstraites pour mises en application SDAI




Reference number
ISO/TS 10303-35:2003(E)
©
ISO 2003

---------------------- Page: 1 ----------------------
ISO/TS 10303-35:2003(E)

PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

This CD-ROM contains the publication ISO/TS 10303-35:2003 in portable document format (PDF), which can
be viewed using Ado
...