iTeh Standards logo
EURUSD
Your shopping cart is empty.
ISO

ISO 407:1991/Cor 1:1999

(Corrigendum)

Small medical gas cylinders - Pin-index yoke-type valve connections - Technical Corrigendum 1

Small medical gas cylinders - Pin-index yoke-type valve connections - Technical Corrigendum 1

Petites bouteilles à gaz médicaux — Raccords de robinets du type à étrier avec ergots de sécurité — Rectificatif technique 1

General Information

Status
Withdrawn
Publication Date
10-Nov-1999
Withdrawal Date
10-Nov-1999
ICS
11.040.10 - Anaesthetic, respiratory and reanimation equipment
Technical Committee
ISO/TC 58/SC 2 - Cylinder fittings
Drafting Committee
ISO/TC 58/SC 2 - Cylinder fittings
Current Stage
9599 - Withdrawal of International Standard
Start Date
08-Nov-2004
Completion Date
13-Dec-2025
Ref Project

Relations

Corrects
ISO 407:1991 - Small medical gas cylinders - Pin-index yoke-type valve connections
Effective Date
06-Jun-2022
Revised
ISO 407:2004 - Small medical gas cylinders - Pin-index yoke-type valve connections
Effective Date
15-Apr-2008
Child
ISO 407:1991 - Small medical gas cylinders - Pin-index yoke-type valve connections
Effective Date
15-Apr-2008
ISO 407:1991/Cor 1:1999 - Small medical gas cylinders — Pin-index yoke-type valve connections — Technical Corrigendum 1 Released:11/11/1999ISO 407:1991/Cor 1:1999 - Small medical gas cylinders — Pin-index yoke-type valve connections — Technical Corrigendum 1 Released:11/11/1999
PreviousNext
Standard
ISO 407:1991/Cor 1:1999 - Small medical gas cylinders — Pin-index yoke-type valve connections — Technical Corrigendum 1 Released:11/11/1999
English language
1 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 407:1991/Cor 1:1999 - Small medical gas cylinders — Pin-index yoke-type valve connections — Technical Corrigendum 1 Released:11/11/1999ISO 407:1991/Cor 1:1999 - Small medical gas cylinders — Pin-index yoke-type valve connections — Technical Corrigendum 1 Released:11/11/1999
PreviousNext
Standard
ISO 407:1991/Cor 1:1999 - Small medical gas cylinders — Pin-index yoke-type valve connections — Technical Corrigendum 1 Released:11/11/1999
French language
1 pages
sale 15% off
Preview
sale 15% off
Preview

Frequently Asked Questions

ISO 407:1991/Cor 1:1999 is a standard published by the International Organization for Standardization (ISO). Its full title is "Small medical gas cylinders - Pin-index yoke-type valve connections - Technical Corrigendum 1". This standard covers: Small medical gas cylinders - Pin-index yoke-type valve connections - Technical Corrigendum 1

Small medical gas cylinders - Pin-index yoke-type valve connections - Technical Corrigendum 1

ISO 407:1991/Cor 1:1999 is classified under the following ICS (International Classification for Standards) categories: 11.040.10 - Anaesthetic, respiratory and reanimation equipment. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO 407:1991/Cor 1:1999 has the following relationships with other standards: It is inter standard links to ISO 407:1991, ISO 407:2004; is excused to ISO 407:1991. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

You can purchase ISO 407:1991/Cor 1:1999 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.

Standards Content (Sample)


INTERNATIONAL STANDARD ISO 407:1991
TECHNICAL CORRIGENDUM 1
Published 1999-11-15
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION � МЕЖДУНАРОДНАЯОРГАНИЗАЦИЯПОСТАНДАРТИЗАЦИИ � ORGANISATION INTERNATIONALE DE NORMALISATION
Small medical gas cylinders — Pin-index yoke-type valve
connections
TECHNICAL CORRIGENDUM 1
Petites bouteilles à gaz médicaux — Raccords de robinets du type à étrier avec ergots de sécurité
RECTIFICATIF TECHNIQUE 1
Technical Corrigendum
...


NORME INTERNATIONALE ISO 407:1991
RECTIFICATIF TECHNIQUE 1
Publié 1999-11-15
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION � МЕЖДУНАРОДНАЯОРГАНИЗАЦИЯПОСТАНДАРТИЗАЦИИ � ORGANISATION INTERNATIONALE DE NORMALISATION
Petites bouteilles à gaz médicaux — Raccords de robinets
du type à étrier avec ergots de sécurité
RECTIFICATIF TECHNIQUE 1
Small medical gas cylinders — Pin-index yoke-type valve connections
TECHNICAL CORRIGENDUM 1
Le Rectificatif techniq
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

ISO
ISO 407:2023(Main)
Small medical gas cylinders - Pin-index yoke-type valve connections

This document is applicable to pin-index yoke-type valve connections for medical gas cylinders, with a working pressure up to a maximum of 200 bar or test pressure up to a maximum of 300 bar, or both. NOTE 1 This type of connection is primarily used for small cylinders (5 l or below). NOTE 2 In this document the unit bar is used, due to its universal use in the field of technical gases. It should, however, be noted that bar is not an SI unit, and that the corresponding SI unit for pressure is Pa (1 bar = 105 Pa = 105 N/m2). This document specifies: - basic dimensions; - requirements for alternative designs of the yoke-type valve connections; - dimensions and positions for the holes and pins for the outlet connections. It also specifies the dimensions and positions for the holes and pins for the outlet connections for gases and gas mixtures.

  • Standard
    19 pages
    English language
    sale 15% off
  • Standard
    20 pages
    French language
    sale 15% off
ISO
ISO 11117:2019(Main)
Gas cylinders - Valve protection caps and guards - Design, construction and tests

This document specifies the requirements for valve protection caps and valve guards used on cylinders for liquefied, dissolved or compressed gases. Valve protection caps and valve guards are some of the options available to protect cylinder valves, including valves with integral pressure regulators (VIPRs) during transport. This document is applicable to valve protection caps and valve guards which inherently provide the primary protection of a cylinder valve. It can also be used to test other equipment (e.g., handling devices) attached to cylinder packages, even in cases where the cylinder valve is inherently able to withstand damage without release of the content. This document excludes protection devices for cylinders with a water capacity of 5 l or less and cylinders whereby the protection device is fixed by means of lugs welded or brazed to the cylinder, or is welded or brazed directly to the cylinder. This document does not cover valve protection for breathing apparatus cylinders. NOTE Small cylinders (e.g., medical cylinders) are commonly transported in an outer-packaging (e.g., pallet) to meet transport regulations. This document does not specify requirements that could be necessary to enable the valve protection device to be used for lifting the cylinder.

  • Standard
    17 pages
    English language
    sale 15% off
  • Standard
    18 pages
    French language
    sale 15% off
ISO
ISO 17510:2025(Main)
Medical devices - Sleep apnoea breathing therapy - Masks and application accessories

This document specifies requirements for masks and accessories, including any connecting element, that are required to connect the patient-connection port of sleep apnoea breathing therapy equipment to a patient for the application of sleep apnoea breathing therapy (e.g. nasal masks, exhaust ports and headgear). This document applies to masks and their accessories used to connect sleep apnoea breathing therapy equipment to the patient. The requirements in this document take priority over the requirements in ISO 18190. This document does not cover oral appliances. NOTE This document has been prepared to address the relevant essential principles[14] and labelling principles[15] of the International Medical Devices Regulators Forum (IMDRF) as indicated in Annex I.

  • Standard
    36 pages
    English language
    sale 15% off
  • Standard
    37 pages
    French language
    sale 15% off
ISO
ISO 80601-2-70:2025(Main)
Medical electrical equipment - Part 2-70: Particular requirements for basic safety and essential performance of sleep apnoea breathing therapy equipment

This document is applicable to the basic safety and essential performance of sleep apnoea breathing therapy equipment, hereafter referred to as ME equipment, intended to alleviate the symptoms of patients who suffer from obstructive sleep apnoea by delivering a therapeutic breathing pressure to the respiratory tract of the patient. Sleep apnoea breathing therapy equipment is intended for use in the home healthcare environment by lay operators as well as in professional healthcare institutions. Sleep apnoea breathing therapy equipment is not considered to utilize a physiologic closed-loop-control system unless it uses a physiological patient variable to adjust the therapy settings. This document excludes sleep apnoea breathing therapy equipment intended for use with neonates. This document is applicable to ME equipment or an ME system intended for those patients who are not dependent on artificial ventilation. This document is not applicable to ME equipment or an ME system intended for those patients who are dependent on artificial ventilation such as patients with central sleep apnoea. This document is also applicable to those accessories intended by their manufacturer to be connected to sleep apnoea breathing therapy equipment, where the characteristics of those accessories can affect the basic safety or essential performance of the sleep apnoea breathing therapy equipment. Masks and application accessories intended for use during sleep apnoea breathing therapy are additionally addressed by ISO 17510. Refer to Figure AA.1 for items covered further under this document. If a clause or subclause is specifically intended to be applicable to ME equipment only, or to ME systems only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME equipment and to ME systems, as relevant. Hazards inherent in the intended physiological function of ME equipment or ME systems within the scope of this document are not covered by specific requirements in this document except in 7.2.13 and 8.4.1 of the general standard. NOTE 2 See also 4.2 of the general standard. This document does not specify the requirements for: – ventilators or accessories intended for critical care ventilators for ventilator-dependent patients, which are given in ISO 80601‑2‑12. – ventilators or accessories intended for anaesthetic applications, which are given in ISO 80601-2-13. – ventilators or accessories intended for home care ventilators for ventilator-dependent patients, which are given in ISO 80601-2-72. – ventilators or accessories intended for emergency and transport, which are given in ISO 80601-2-84. – ventilators or accessories intended for home-care ventilatory support, which are given in ISO 80601‑2-79 and ISO 80601‑2‑80. – high-frequency ventilators[23], which are given in ISO 80601-2-87. – respiratory high flow equipment, which are given in ISO 80601‑2‑90; NOTE 3 ISO 80601-2-80 ventilatory support equipment can incorporate high-flow therapy operational mode, but such a mode is only for spontaneously breathing patients. – user-powered resuscitators, which are given in ISO 10651-4; – gas-powered emergency resuscitators, which are given in ISO 10651-5; – oxygen therapy constant flow ME equipment; and – cuirass or “iron-lung” ventilation equipment.

  • Standard
    78 pages
    English language
    sale 15% off
  • Standard
    83 pages
    French language
    sale 15% off
ISO
ISO 18777-2:2025(Main)
Transportable liquid oxygen systems for medical use - Part 2: Particular requirements for portable units

This document specifies particular requirements for portable units which are part of a transportable liquid oxygen system and used to provide a controlled flow of oxygen for inhalation by the patient in the home-care environment. Portable units are intended to be used without professional supervision, carried by patients while moving around and during their off-site activities and refilled from a base unit via a transfilling device through the portable unit’s filling port connector. NOTE Requirements that are common to both portable units and base units are specified in ISO 18777-1.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
ISO
ISO 80369-1:2025(Main)
Small-bore connectors for liquids and gases in healthcare applications - Part 1: General requirements

This document specifies general interface requirements for small-bore connectors that form part of a medical device or accessory that conveys liquids or gases to a patient. This document also identifies the applications for which these small-bore connectors are intended to be used, which include, but are not limited to: - respiratory; - enteral; - limb cuff inflation; - neural; - intravascular or hypodermic; - other use cases utilizing an ISO 80369-7 small-bore connector. This document provides the methodology to assess non-interconnectable characteristics of small-bore connectors based on their inherent design in order to reduce the risk of misconnections between medical devices or between accessories for different applications as specified in this document as well as those that can be developed under future parts of the ISO and IEC 80369 series. NOTE Clause A.2 contains guidance or rationale for this Clause.

  • Standard
    41 pages
    English language
    sale 15% off
  • Standard
    41 pages
    French language
    sale 15% off
ISO
ISO 19223-3:2025(Main)
Lung ventilators and related equipment - Vocabulary and semantics - Part 3: Respiratory care

This document defines terms for respiratory care. This document is applicable: - in respiratory high-flow therapy equipment standards; - in sleep apnoea breathing therapy equipment standards; - in sleep apnoea breathing therapy masks and accessories standards; - in ventilatory support equipment standards; - in health informatics standards; - for labelling on medical electrical equipment and medical electrical systems; - in medical electrical equipment and medical electrical system instructions for use and accompanying documents; - for medical electrical equipment and medical electrical systems interoperability; - in electronic health records. This document excludes mechanical ventilation (defined in ISO 19223:2019), high-frequency and jet ventilation (defined in ISO 19223-2:2025), negative pressure ventilation, liquid ventilation, and extracorporeal membrane oxygenation.

  • Standard
    12 pages
    English language
    sale 15% off
ISO
ISO 7376-2:2025(Main)
Anaesthetic and respiratory equipment - Part 2: Video laryngoscopes

This document specifies requirements for electrically powered video laryngoscopes that comprise a handle, a rigid blade, a light source, a camera and an image display that provides a clear view of the larynx to assist tracheal intubation. This document specifies requirements for accessories that are essential to the function of the video laryngoscope. This document is not applicable to the following: - laryngoscopes without a camera or image display (see ISO 7376); - endoscopes (see ISO 8600-1); - laryngoscopes designed for surgery; - image quality requirement for third party display screens, for example a phone or computer monitor, and which are not supplied by the video laryngoscope manufacturer as part of the video laryngoscope system.

  • Standard
    22 pages
    English language
    sale 15% off
ISO
ISO 7396-3:2025(Main)
Medical gas pipeline systems - Part 3: Proportioning units for the production of synthetic medical air

1.1 This document specifies requirements relating to the construction and operation of devices producing air through the blending of oxygen and nitrogen for use as sources of supply in supply systems for medical gases. 1.2 This document is applicable to proportioning units intended to produce synthetic medical air and air for driving surgical tools by mixing in defined proportions oxygen and nitrogen. 1.3 This document is applicable to proportioning units intended to be components of a medical gas supply system for medical air which supplies a medical gas pipeline distribution system complying with ISO 7396-1. 1.4 The number of proportioning units within the medical air supply system and their combination with other sources of supply (e.g. cylinder manifolds) to ensure that the supply system consists of at least three sources of supply is outside the scope of this document. Requirements for the supply systems for medical air are given in ISO 7396-1.

  • Standard
    27 pages
    English language
    sale 15% off
  • Standard
    29 pages
    French language
    sale 15% off
ISO
ISO 7376:2020/Amd 1:2025(Amendment)
Anaesthetic and respiratory equipment - Laryngoscopes for tracheal intubation - Amendment 1: Clarification of optical output and illumination requirements
  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off