ISO 19596:2017
(Main)Admixtures for concrete
Admixtures for concrete
ISO 19596 specifies definitions and requirements for admixtures for use in concrete in accordance with ISO 22965. ISO 19596 does not specify provisions governing the practical application of admixtures in the production of concrete, i.e. requirements concerning composition, mixing, placing, curing, etc. of concrete containing admixtures.
Adjuvants pour béton
General Information
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 19596
First edition
2017-09
Admixtures for concrete
Adjuvants pour béton
Reference number
ISO 19596:2017(E)
©
ISO 2017
---------------------- Page: 1 ----------------------
ISO 19596:2017(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 19596:2017(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Requirements . 4
4.1 General requirements . 4
4.2 Requirements for specific types of admixtures . 5
4.3 Release of harmful substances .11
4.4 Corrosion behaviour .11
4.4.1 Testing and labelling .11
4.4.2 Test requirement .12
5 Sampling .12
6 Conformity control and evaluation of conformity .12
7 Marking and labelling .12
7.1 General .12
7.2 Designation of admixtures .12
7.3 Additional information .12
Annex A (normative) Approved and declared lists for corrosion behaviour .13
Annex B (normative) Reference concretes .16
Annex C (normative) Methods of mixing and testing time-related changes of concrete
containing slump and air retention/high range water reducing/air entraining
admixtures according to Table 16 .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.