ISO/TS 16785:2020
(Main)Electronic Fee Collection (EFC) — Application interface definition between DSRC-OBE and external in-vehicle devices
Electronic Fee Collection (EFC) — Application interface definition between DSRC-OBE and external in-vehicle devices
This document defines an application interface between DSRC-based OBE (hereinafter referred to as "DSRC-OBE") and an external in-vehicle device (hereinafter referred to as "the external device") to make DSRC-OBE applicable for diversified external devices. NOTE For use in autonomous tolling and DSRC-based (CEN, UNI, ARIB, TTA and GB/T) electronic fee collection (EFC) systems. For use in urban and inter-urban toll schemes. The scope of this document covers the following items (as shown in Figure 4): — definitions of the application interface between DSRC-OBE and external devices, including global navigation satellite system (GNSS), cellular network (CN) and controller area network (CAN) device; — definitions of data groups and data elements. Figure 4 — Scope of this document The following items are out of the scope of this document: — definitions of hardware components in the external device such as GNSS module, CN module and mobile devices; — definitions of the physical interface between DSRC-OBE and the external device such as USB and Bluetooth; — definition of ITS services other than EFC; — definition of algorithms for authentication, encryption and key management.
Perception du télépéage — Définition de l'interface entre l'équipement à bord à communications dédiées à courte portée (DSRC-OBE) et les dispostifs externes embarqués
General Information
Relations
Standards Content (Sample)
TECHNICAL ISO/TS
SPECIFICATION 16785
Second edition
2020-03
Electronic Fee Collection (EFC) —
Application interface definition
between DSRC-OBE and external in-
vehicle devices
Perception du télépéage — Définition de l'interface entre
l'équipement à bord à communications dédiées à courte portée
(DSRC-OBE) et les dispostifs externes embarqués
Reference number
ISO/TS 16785:2020(E)
©
ISO 2020
---------------------- Page: 1 ----------------------
ISO/TS 16785:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/TS 16785:2020(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Symbols and abbreviated terms . 3
5 Tolling models with the in-vehicle device . 4
5.1 General . 4
5.2 Tolling model . 4
5.2.1 Operating environment . 4
5.2.2 Data exchanges . 6
6 Data group . 7
6.1 General . 7
6.2 Payment means status . 7
6.2.1 PaymentMode . 7
6.2.2 AccountStatus . 7
6.2.3 PaymentMeansBalance . 8
6.2.4 PaymentMeans . 8
6.2.5 PaymentMeansUnit .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.