Health informatics — Device interoperability — Part 10407: Personal health device communication — Device specialization — Blood pressure monitor

Within the context of the ISO/IEEE 11073 family of standards for device communication, this document establishes a normative definition of communication between personal telehealth blood pressure monitor devices and compute engines (e.g., cell phones, personal computers, personal health appliances, and set top boxes) in a manner that enables plug-and-play interoperability. It leverages appropriate portions of existing standards including ISO/IEEE 11073 terminology, information models, application profile standards, and transport standards. It specifies the use of specific term codes, formats, and behaviors in telehealth environments restricting optionality in base frameworks in favor of interoperability. This document defines a common core of communication functionality for personal telehealth blood pressure monitors.

Informatique de santé — Interopérabilité des dispositifs — Partie 10407: Communication entre dispositifs de santé personnels — Spécialisation des dispositifs — Moniteur de pression sanguine

Dans le contexte de la famille de normes ISO/IEEE 11073 relatives à la communication entre des dispositifs, le présent document établit une définition normative de la communication entre des dispositifs de moniteurs de pression artérielle personnels de télésanté et des moteurs informatiques (par exemple des téléphones cellulaires, des ordinateurs personnels, des équipements personnels de santé et des boîtiers décodeurs) d’une manière qui permet une interopérabilité de type prêt à l’emploi. Elle s’appuie sur les parties appropriées de normes existantes, y compris la terminologie, des modèles d’informations, des normes de profils d’applications et des normes de transport de l’ISO/IEEE 11073. Elle spécifie l’utilisation de codes, de formats et de comportements en termes spécifiques dans les environnements de télésanté, en limitant les choix à des cadres de travail de base en faveur de l’interopérabilité. Le présent document définit un noyau commun de fonctionnalités de communication pour les moniteurs de pression sanguine personnels de télésanté.

General Information

Status
Published
Publication Date
14-Dec-2022
Current Stage
6060 - International Standard published
Start Date
15-Dec-2022
Due Date
09-Sep-2023
Completion Date
15-Dec-2022
Ref Project

Relations

Buy Standard

Standard
ISO/IEEE 11073-10407:2022 - Health informatics — Device interoperability — Part 10407: Personal health device communication — Device specialization — Blood pressure monitor Released:15. 12. 2022
English language
56 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO/IEEE 11073-10407:2022 - Health informatics — Device interoperability — Part 10407: Personal health device communication — Device specialization — Blood pressure monitor Released:15. 12. 2022
French language
56 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
REDLINE ISO/IEEE FDIS 11073-10407 - Health informatics — Device interoperability — Part 10407: Personal health device communication — Device specialization — Blood pressure monitor Released:6/2/2022
English language
56 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
ISO/IEEE FDIS 11073-10407 - Health informatics — Device interoperability — Part 10407: Personal health device communication — Device specialization — Blood pressure monitor Released:6/2/2022
English language
56 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
ISO/IEEE FDIS 11073-10407 - Health informatics — Device interoperability — Part 10407: Personal health device communication — Device specialization — Blood pressure monitor Released:14. 07. 2022
French language
56 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO/IEEE
STANDARD 11073-10407
Second edition
2022-12
Health informatics — Device
interoperability —
Part 10407:
Personal health device communication
— Device specialization — Blood
pressure monitor
Informatique de santé — Interopérabilité des dispositifs —
Partie 10407: Communication entre dispositifs de santé personnels —
Spécialisation des dispositifs — Moniteur de pression sanguine
Reference number
ISO/IEEE 11073-10407:2022(E)
© IEEE 2020

---------------------- Page: 1 ----------------------
ISO/IEEE 11073-10407:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© IEEE 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from IEEE at the address below.
Institute of Electrical and Electronics Engineers, Inc
3 Park Avenue, New York
NY 10016-5997, USA
Email: stds.ipr@ieee.org
Website: www.ieee.org
Published in Switzerland
ii
 © IEEE 2020 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEEE 11073-10407:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted (see www.iso.org/directives).
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its
standards through a consensus development process, approved by the American National Standards
Institute, which brings together volunteers representing varied viewpoints and interests to achieve the
final product. Volunteers are not necessarily members of the Institute and serve without compensation.
While the IEEE administers the process and establishes rules to promote fairness in the consensus
development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the
information contained in its standards.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on
the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the World
Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
ISO/IEEE 11073-10407 was prepared by the IEEE 11073 Standards Committee of the IEEE Engineering in
Medicine and Biology Society (as IEEE Std 11073-10407-2020) and drafted in accordance with its editorial
rules. It was adopted, under the “fast-track procedure” defined in the Partner Standards Development
Organization cooperation agreement between ISO and IEEE, by Technical Committee ISO/TC 215, Health
informatics.
This second edition cancels and replaces the first edition (ISO/IEEE 11073-10407:2010), which has been
technically revised.
A list of all parts in the ISO/IEEE 11073 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
© IEEE 2020 – All rights reserved iii

---------------------- Page: 3 ----------------------
IEEE Std 11073-10407™-2020
(Revision of IEEE Std 11073-10407-2008)
Health informatics—Personal health device communication
Part 10407: Device specialization—
Blood pressure monitor
Developed by the

IEEE 11073™ Standards Committee
of the
IEEE Engineering in Medicine and Biology Society


Approved 30 January 2020

IEEE SA Standards Board

---------------------- Page: 4 ----------------------
ISO/IEEE 11073-10407:2022(E)
Abstract: Within the context of the ISO/IEEE 11073 family of standards for device
communication, this standard establishes a normative definition of communication between
personal telehealth blood pressure monitor devices and compute engines (e.g., cell phones,
personal computers, personal health appliances, and set top boxes) in a manner that enables
plug-and-play interoperability. It leverages appropriate portions of existing standards including
ISO/IEEE 11073 terminology, information models, application profile standards, and transport
standards. It specifies the use of specific term codes, formats, and behaviors in telehealth
environments restricting optionality in base frameworks in favor of interoperability. This standard
defines a common core of communication functionality for personal telehealth blood pressure
monitors.
Keywords: blood pressure monitor, IEEE 11073-10407™, medical device communication,
personal health devices

The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2020 by The Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 30 April 2020. Printed in the United States of America.
IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics Engineers,
Incorporated.
PDF: ISBN 978-1-5044-6460-4 STD24062
Print: ISBN 978-1-5044-6461-1 STDPD24062
IEEE prohibits discrimination, harassment, and bullying.
For more information, visit https://www.ieee.org/about/corporate/governance/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission
of the publisher.

---------------------- Page: 5 ----------------------
ISO/IEEE 11073-10407:2022(E)

Important Notices and Disclaimers Concerning IEEE Standards Documents
IEEE documents are made available for use subject to important notices and legal disclaimers. These
notices and disclaimers, or a reference to this page, appear in all standards and may be found under the
heading “Important Notices and Disclaimers Concerning IEEE Standards Documents.” They can also be
obtained on request from IEEE or viewed at https://standards.ieee.org/ipr/disclaimers.html.
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are
developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards
Association (“IEEE SA”) Standards Board. IEEE (“the Institute”) develops its standards through a
consensus development process, approved by the American National Standards Institute (“ANSI”), which
brings together volunteers representing varied viewpoints and interests to achieve the final product. IEEE
Standards are documents developed through scientific, academic, and industry-based technical working
groups. Volunteers in IEEE working groups are not necessarily members of the Institute and participate
without compensation from IEEE. While IEEE administers the process and establishes rules to promote
fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the
accuracy of any of the information or the soundness of any judgments contained in its standards.
IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure
against interference with or from other devices or networks. Implementers and users of IEEE Standards
documents are responsible for determining and complying with all appropriate safety, security,
environmental, health, and interference protection practices and all applicable laws and regulations.
IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and
expressly disclaims all warranties (express, implied and statutory) not included in this or any other
document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness
for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness
of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort.
IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”
Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there
are no other ways to produce, test, measure, purchase, market, or provide other goods and services related
to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved
and issued is subject to change brought about through developments in the state of the art and comments
received from users of the standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or other
services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any
other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his
or her own independent judgment in the exercise of reasonable care in any given circumstances or, as
appropriate, seek the advice of a competent professional in determining the appropriateness of a given
IEEE standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO:
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE
UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND
REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.

3
Copyright © 2020 IEEE. All rights reserved.

---------------------- Page: 6 ----------------------
ISO/IEEE 11073-10407:2022(E)

Translations
The IEEE consensus development process involves the review of documents in English only. In the event
that an IEEE standard is translated, only the English version published by IEEE should be considered the
approved IEEE standard.
Official statements
A statement, written or oral, that is not processed in accordance with the IEEE SA Standards Board
Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its
committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures,
symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall
make it clear that his or her views should be considered the personal views of that individual rather than the
formal position of IEEE.
Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of
membership affiliation with IEEE. However, IEEE does not provide consulting information or advice
pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a
proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a
consensus of concerned interests, it is important that any responses to comments and questions also receive
the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and
Standards Coordinating Committees are not able to provide an instant response to comments or questions
except in those cases where the matter has previously been addressed. For the same reason, IEEE does not
respond to interpretation requests. Any person who would like to participate in revisions to an IEEE
standard is welcome to join the relevant IEEE working group.
Comments on standards should be submitted to the following address:
Secretary, IEEE SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854 USA
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with
the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory
requirements. Implementers of the standard are responsible for observing or referring to the applicable
regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not
in compliance with applicable laws, and these documents may not be construed as doing so.
Copyrights
IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws.
They are made available by IEEE and are adopted for a wide variety of both public and private uses. These
include both use, by reference, in laws and regulations, and use in private self-regulation, standardization,
and the promotion of engineering practices and methods. By making these documents available for use and
adoption by public authorities and private users, IEEE does not waive any rights in copyright to the
documents.

4
Copyright © 2020 IEEE. All rights reserved.

---------------------- Page: 7 ----------------------
ISO/IEEE 11073-10407:2022(E)

Photocopies
Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to
photocopy portions of any individual standard for company or organizational internal use or individual,
non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance
Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission
to photocopy portions of any individual standard for educational classroom use can also be obtained
through the Copyright Clearance Center.
Updating of IEEE Standards documents
Users of IEEE Standards documents should be aware that these documents may be superseded at any time
by the issuance of new editions or may be amended from time to time through the issuance of amendments,
corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the
document together with any amendments, corrigenda, or errata then in effect.
Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years
old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of
some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that
they have the latest edition of any IEEE standard.
In order to determine whether a given document is the current edition and whether it has been amended
through the issuance of amendments, corrigenda, or errata, visit IEEE Xplore at https://ieeexplore.ieee.org/
or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEE’s
standards development process, visit the IEEE SA Website at https://standards.ieee.org.
Errata
Errata, if any, for IEEE standards can be accessed via https://standards.ieee.org/standard/index.html. Search
for standard number and year of approval to access the web page of the published standard. Errata links are
located under the Additional Resources Details section. Errata are also available in IEEE Xplore:
https://ieeexplore.ieee.org/browse/standards/collection/ieee/. Users are encouraged to periodically check for
errata.
Patents
Attention is called to the possibility that implementation of this standard may require use of subject matter
covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to
the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant
has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the
IEEE SA Website at https://standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may
indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without
compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of
any unfair discrimination to applicants desiring to obtain such licenses.
Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not
responsible for identifying Essential Patent Claims for which a license may be required, for conducting
inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or
conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing
agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that
determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely
their own responsibility. Further information may be obtained from the IEEE Standards Association.

5
Copyright © 2020 IEEE. All rights reserved.

---------------------- Page: 8 ----------------------
ISO/IEEE 11073-10407:2022(E)

Participants
At the time this IEEE standard was completed, the Personal Health Device Working Group had the
following membership:
Daidi Zhong, Co-Chair
Michael J. Kirwan, Co-Chair

Karsten Aalders Cory Condek Robert Hall
Charles R. Abbruscato Todd H. Cooper Shu Han
Nabil Abujbara David Cornejo Nathaniel Hamming
Maher Abuzaid Douglas Coup Rickey L. Hampton
James Agnew Nigel Cox Sten Hanke
Manfred Aigner Hans Crommenacker Aki Harma
Jorge Alberola Tomio Crosley Jordan Hartmann
David Aparisi Allen Curtis Kai Hassing
Lawrence Arne Jesús Daniel Trigo Wolfgang Heck
Diego B. Arquillo David Davenport Nathaniel Heintzman
Serafin Arroyo Russell Davis Charles Henderson
Muhammad Asim Sushil K. Deka Jun-Ho Her
Kit August Ciro de la Vega Helen B. Hernandez
Doug Baird Pedro de-las-Heras-Quiros Timothy L. Hirou
David Baker Allen Hobbs
Jim Dello Stritto
Anindya Bakshi
Kent Dicks Alex Holland
Ananth Balasubramanian Hyoungho Do Arto Holopainen
Sunlee Bang Jonathan Dougherty Kris Holtzclaw
M. Jonathan Barkley Xiaolian Duan Xinyi Hong
Gilberto Barrón Sourav Dutta Robert Hoy
David Bean Jakob Ehrensvard Di Hu
John Bell Fredrik Einberg Anne Huang
Olivia Bellamou-Huet Javier Escayola Calvo Ron Huby
Rudy Belliardi Mark Estes David Hughes
Daniel Bernstein Leonardo Estevez Robert D. Hughes
George A. Bertos Bosco T. Fernandes Jiyoung Huh
Chris Biernacki Christoph Fischer Hugh Hunter
Ola Björsne Morten Flintrup Philip O. Isaacson
Thomas Blackadar Joseph W. Forler Atsushi Ito
Thomas Bluethner Russell Foster Michael Jaffe
Douglas P. Bogia Eric Freudenthal Praduman Jain
Xavier Boniface Matthias Frohner
Hu Jin
Ken Fuchs
Shannon Boucousis Danny Jochelson
Jing Gao
Julius Broma Akiyoshi Kabe
Lyle G. Bullock, Jr. Marcus Garbe Steve Kahle
Bernard Burg John Garguilo Tomio Kamioka
Chris Burns Rick Geimer James J. Kang
Jeremy Byford-Rew Igor Gejdos Kei Kariya
Satya Calloji Ferenc Gerbovics Andy Kaschl
Carole C. Carey Alan Godfrey Junzo Kashihara
Craig Carlson Nicolae Goga Colin Kennedy
Santiago Carot-Nemesio Julian Goldman Ralph Kent
Randy W. Carroll Raul Gonzalez Gomez Laurie M. Kermes
Seungchul Chae Chris Gough Ahmad Kheirandish
Peggy Chien Channa Gowda Junhyung Kim
David Chiu Charles M. Gropper Minho Kim
Jinyong Choi Amit Gupta Min-Joon Kim
Chia-Chin Chong Jeff Guttmacher Taekon Kim
Rasmus Haahr
Saeed A. Choudhary Tetsuya Kimura
Christian Habermann
Jinhan Chung Alfred Kloos
John A. Cogan Michael Hagerty Jeongmee Koh
John T. Collins Jerry Hahn Jean-Marc Koller

6
Copyright © 2020 IEEE. All rights reserved.

---------------------- Page: 9 ----------------------
ISO/IEEE 11073-10407:2022(E)

John Koon BegonyaOtal Nicholas Steblay
Patty Krantz Lars Steubesand
Marco Paleari
Raymond Krasinski John (Ivo) Stivoric
Bud Panjwani
Alexander Kraus Carl Pantiskas Raymond A. Strickland
Ramesh Krishna Harry P. Pappas Chandrasekaran Subramaniam
Geoffrey Kruse Hanna Park Hermanni Suominen
Falko Kuester Jong-Tae Park Lee Surprenant
Rafael Lajara Myungeun Park Ravi Swami
Pierre Landau Soojun Park Ray Sweidan
Jaechul Lee Phillip E. Pash Na Tang
Jong-Muk Lee Tong-Bi Pei Haruyuyki Tatsumi
Kyong Ho Lee Soren Petersen Isabel Tejero
Rami Lee James Petisce Tom Thompson
Sungkee Lee Peter Piction Jonas Tirén
Woojae Lee Michael Pliskin Janet Traub
Qiong Li Varshney Prabodh Gary Tschautscher
Xiangchen Li Jeff Price Masato Tsuchid
Yingsong Li Ken Tubman
Harald Prinzhorn
Zhuofang Li Akib Uddin
Harry Qiu
Patrick Lichter
Tanzilur Rahman Sunil Unadkat
Lin Lin Phillip Raymond Fabio Urbani
Jisoon Lim Terrie Reed Philipp Urbauer
Joon-Ho Lim Barry Reinhold Laura Vanzago
Liang Liu Brian Reinhold Alpo Värri
Xiaoming Liu Melvin I. Reynolds Andrei Vasilateanu
Wei-Jung Lo John G. Rhoads Dalimar Velez
Charles Lowe Jeffrey S. Robbins Martha Velezis
Don Ludolph Chris Roberts Rudi Voon
Christian Luszick Moskowitz Robert Barry Vornbrock
Bob MacWilliams Stefan Robert Isobel Walker
Srikkanth Madhurbootheswaran Scott M. Robertson David Wang
Miriam L. Makhlouf Timothy Robertson Linling Wang
Romain Marmot David Rosales Jerry P. Wang
Sandra Martinez Yao Wang
Bill Saltzstein
Miguel Martínez de Espronceda Giovanna Sannino Yi Wang
Cámara Jose A. Santos-Cadenas
Steve Warren
Stefan Sauermann
Peter Mayhew Fujio Watanabe
John Sawyer
Jim McCain Toru Watsuji
László Meleg AloisSchloegl Kathleen Wible
Alexander Mense Paul S. Schluter Paul Williamson
Behnaz Minaei Mark G. Schnell Jan Wittenber
Jinsei Miyazaki Richard A. Schrenker Jia-Rong Wu
Erik Moll Antonio Scorpiniti Will Wykeham
Darr Moore KwangSeok Seo Ariton Xhafa
Chris Morel Riccardo Serafin Ricky Yang
Carsten Mueglitz Sid Shaw Melanie S. Yeung
Soundharya Nagasubramanian Frank Shen Qiang Yin
Alex Neefus Min Shih Done-Sik Yoo
Trong-Nghia Nguyen-Dobinsky Mazen Shihabi Zhi Yu
Michael E. Nidd Redmond Shouldice Jianchao Zeng
Jim Niswander Sternly K. Simon Jason Zhang
Hiroaki Niwamoto Marjorie Skubic
Jie Zhao
Robert Smith
Thomas Norgall Thomas Zhao
Ivan Soh
Yoshiteru Nozoe Yuanhong Zhong
Motoki Sone
Abraham Ofek Miha Zoubek
Brett Olive Emily Sopensky Szymon Zyskoter
Rajagopalan Srinivasan


7
Copyright © 2020 IEEE. All rights reserved.

---------------------- Page: 10 ----------------------
ISO/IEEE 11073-10407:2022(E)

The following members of the individual Standards Association balloting group voted on this standard.
Balloters may have voted for approval, disapproval, or abstention.
Robert Aiello Werner Hoelzl Iulian Profir
Bjoern Andersen Noriyuki Ikeuchi
Beth Pumo
Lyle G. Bullock, Jr. Atsushi Ito Stefan Schlichting
Keith Chow Raj Jain Janek Schumann
Malcolm Clarke Piotr Karocki Walter Struppler
David Fuschi Raymond Krasinski Oren Yuen
Randall Groves H. Moll Janusz Zalewski
Nathaniel Hamming Daidi Zhong

When the IEEE SA Standards Board approved this standard on 30 January 2020, it had the following
membership:
Gary Hoffman, Chair
Vacant Position, Vice Chair
Jean-Philippe Faure, Past Chair
Konstantinos Karachalios, Secretary
Ted Burse Howard Li Dorothy Stanley
J. Travis Griffith Dong Liu Mehmet Ulema
Grace Gu Kevin Lu Lei Wang
Guido R. Hiertz Paul Nikolich Sha Wei
Joseph L. Koepfinger* Damir Novosel Philip B. Winston
John D. Kulick Jon Walter Rosdahl Daidi Zhong
David J. Law Jingyi Zhou
*Member Emeritus


8
Copyright © 2020 IEEE. All rights reserved.

---------------------- Page: 11 ----------------------
ISO/IEEE 11073-10407:2022(E)

Introduction
This introduction is not part of IEEE Std 11073-10407-2020, Health informatics—Personal health device
communication—Part 10407: Device specialization—Blood pressure monitor.
ISO/IEEE 11073 standards enable communication between medical devices and external computer systems.
This document uses the optimized framework created in IEEE Std 11073-20601™-2019 and describes a
a
specific, interoperable communication approach for blood pressure monitors. These standards align with
and draw on the existing clinically focused standards to provide support for communication of data from
personal health devices.


a
Information on references can be found in Clause 2.

9
Copyright © 2020 IEEE. All rights reserved.

---------------------- Page: 12 ----------------------
ISO/IEEE 11073-10407:2022(E)

Contents
1. Overview .12
1.1 Scope .12
1.2 Purpose .12
1.3 Word usage .12
1.4 Context .13
2. Normative references .13
3. Definitions, acronyms, and abbreviations .14
3.1 Definitions .14
3.2 Acronyms and abbreviations .15
4. Introduction to ISO/IEEE 11073 personal health devices .15
4.1 General .15
4.2 Introduction to IEEE 11073-20601 modeling constructs .16
4.3 Compliance with other standards .17
5. Blood pressure monitor device concepts and modalities .17
5.1 General .17
5.2 Systolic and diastolic pressure .18
5.3 Mean arterial pressure.18
5.4 Pulse rate .18
5.5 Blood pressure measurement status .18
6. Blood pressure monitor domain information model .18
6.1 Overview .18
6.2 Class extensions .18
6.3 Object instance diagram .18
6.4 Types of configuration .20
6.5 Medical device system object .20
6.6 Numeric objects .25
6.7 Real-time sample array objects .30
6.8 Enumeration objects .
...

NORME ISO/IEEE
INTERNATIONALE 11073-10407
Deuxième édition
2022-12
Informatique de santé —
Interopérabilité des dispositifs —
Partie 10407:
Communication entre dispositifs de
santé personnels — Spécialisation des
dispositifs — Moniteur de pression
sanguine
Health informatics — Device interoperability —
Part 10407: Personal health device communication — Device
specialization — Blood pressure monitor
Numéro de référence
ISO/IEEE 11073-10407:2022(F)
© IEEE 2020

---------------------- Page: 1 ----------------------
ISO/IEEE 11073-10407:2022(F)
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© IEEE 2020
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y
compris la photocopie, ou la diffusion sur l’internet ou un intranet, sans autorisation écrite préalable. Une autorisation peut être
demandée à l’IEEE à l’adresse ci-après.
Institute of Electrical and Electronics Engineers, Inc
3 Park Avenue, New York
NY 10016-5997, USA
E-mail: stds.ipr@ieee.org
Website: www.ieee.org
Publié en Suisse
ii
 © IEEE 2020 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO/IEEE 11073-10407:2022(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes
nationaux de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en
général confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit
de faire partie du comité technique créé à cet effet. Les organisations internationales, gouvernementales
et non gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore
étroitement avec la Commission électrotechnique internationale (IEC) en ce qui concerne la
normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier de prendre note des différents
critères d'approbation requis pour les différents types de documents ISO (voir www.iso.org/directives).
Les documents normatifs de l’IEEE sont développés au sein des sociétés de l’IEEE et des Comités de
Coordination des Normes du Conseil des Normes de l’Association des normes IEEE (IEEE-SA). L’IEEE
élabore ses normes par le biais d’un processus d'élaboration du consensus approuvé par l’American
National Standards Institute, qui rassemble des volontaires représentant divers points de vue et divers
intérêts pour parvenir au produit final. Les volontaires ne sont pas nécessairement des membres de
l’Institut et aucune compensation ne leur est attribuée. Bien que l’IEEE administre le processus et
établisse des règles pour favoriser l’équité au cours du processus d'élaboration du consensus, l’IEEE
n’évalue pas, ne soumet pas à essai ou ne vérifie pas de manière indépendante l’exactitude des
informations contenues dans ses normes.
L'attention est attirée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de
ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant les
références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de l'élaboration
du document sont indiqués dans l'Introduction et/ou dans la liste des déclarations de brevets reçues par
l'ISO (voir www.iso.org/brevets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un
engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l'ISO liés à l'évaluation de la conformité, ou pour toute information au sujet de l'adhésion
de l'ISO aux principes de l’Organisation mondiale du commerce (OMC) concernant les obstacles
techniques au commerce (OTC), voir www.iso.org/iso/fr/avant-propos.
ISO/IEEE 11073-10407 a été élaborée par le Comité des normes IEEE 11073 de la Société d’Ingénierie en
Médecine et Biologie de l’IEEE (en tant que norme IEEE 11073-10407-2020) et rédigée conformément à
ses règles de rédaction. Elle a été adoptée par le comité technique ISO/TC 215, Informatique de santé,
dans le cadre de la «procédure par voie express» définie par l’accord de coopération PSDO (Organisation
partenaire élaboratrice de norme) entre l’ISO et l’IEEE.
Cette deuxième édition annule et remplace la première édition (ISO/IEEE 11073-10407:2010), qui a fait
l’objet d’une révision technique.
Une liste de toutes les parties de la série ISO/IEEE 11073 se trouve sur le site web de l’ISO.
Il convient que l’utilisateur adresse tout retour d’information ou toute question concernant le présent
document à l’organisme national de normalisation de son pays. Une liste exhaustive desdits organismes
se trouve à l’adresse www.iso.org/fr/members.html.
© IEEE 2020 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
IEEE Std 11073-10407™-2020
(Révision de la norme IEEE 11073-10407-2005)


Informatique de santé — Communication entre dispositifs de santé
personnels
Partie 10407 : Communication entre
dispositifs de santé personnels —
Spécialisation des dispositifs — Moniteur de
pression sanguine
Élaborée par le

IEEE 11073™ Standards Committee
de la
Société d’Ingénierie en Médecine et Biologie de l’IEEE


Approuvée le 30 janvier 2020

Conseil des Normes IEEE SA

---------------------- Page: 4 ----------------------
ISO/IEEE 11073-10407:2022(F)
ISO/IEEE FDIS 11073-10407:2022(F)
Résumé : Dans le contexte de la famille de normes ISO/IEEE 11073 relatives à la communication entre des
dispositifs, la présente norme établit une définition normative de la communication entre des dispositifs de
moniteurs de pression artérielle personnels de télésanté et des moteurs informatiques (par exemple des
téléphones cellulaires, des ordinateurs personnels, des équipements personnels de santé et des boîtiers
décodeurs) d’une manière qui permet une interopérabilité de type prêt à l’emploi. Elle s’appuie sur les parties
appropriées de normes existantes, y compris la terminologie, des modèles d’informations, des normes de profils
d’applications et des normes de transport de l’ISO/IEEE 11073. Elle spécifie l’utilisation de codes, de formats et de
comportements en termes spécifiques dans les environnements de télésanté, en limitant les choix à des cadres de
travail de base en faveur de l’interopérabilité. La présente norme définit un noyau commun de fonctionnalités de
communication pour les moniteurs de pression sanguine personnels de télésanté.
Mots-clés : moniteur de pression artérielle, IEEE 11073-10407™, communication entre dispositifs médicaux,
dispositifs de santé personnels

The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, États-Unis
Copyright © 2020 — Institute of Electrical and Electronics Engineers, Inc.
Tous droits réservés. Publié le 30 avril 2020. Imprimé aux États-Unis.
IEEE est une marque commerciale déposée à l’Office des brevets et des marques des États-Unis, détenue par l’Institute of Electrical and Electronics Engineers,
Incorporated.
PDF : ISBN 978-1-5044-6460-4 STD24062
Copie papier : ISBN 978-1-5044-6461-1 STDPD24062
L’IEEE interdit toute discrimination, tout harcèlement et toute intimidation.
Pour plus d’informations, consulter https://www.ieee.org/about/corporate/governance/p9-26.html.
Toute reproduction, même partielle, de cette publication, sous quelque forme et par quelque procédé que ce soit, y compris par système de localisation électronique, est
interdite sans l’autorisation écrite préalable de l’éditeur.

---------------------- Page: 5 ----------------------
ISO/IEEE 11073-10407:2022(F)
ISO/IEEE FDIS 11073-10407:2022(F)
Notes importantes et rejets de responsabilité concernant les documents normatifs de
l’IEEE
Les documents de l’IEEE sont mis à disposition pour utilisation sous réserve de notes importantes et de rejets de
responsabilité légale. Ces notes et rejets de responsabilité, ou une référence à cette page, apparaissent dans toutes
les normes et peuvent être trouvés sous l’en-tête « Notes importantes et rejets de responsabilité concernant les
documents normatifs de l’IEEE ». Ils peuvent également être obtenus sur demande auprès de l’IEEE ou visualisés
sur le site : https://standards.ieee.org/ipr/disclaimers.html.
Note et rejet de responsabilité concernant l’utilisation des documents normatifs de l’IEEE
Les documents normatifs de l’IEEE (normes, usages recommandés et guides), à la fois pour une utilisation pleine
et un essai d’utilisation, sont développés au sein des sociétés de l’IEEE et des Comités de Coordination des Normes
du Conseil des Normes de l’Association des normes IEEE (IEEE-SA). L’IEEE (« l’Institut ») élabore ses normes par
le biais d’un processus de développement de consensus approuvé par l’American National Standards Institute
(« ANSI »), qui rassemble des volontaires représentant divers points de vue et divers intérêts pour parvenir au
produit final. Les normes de l’IEEE sont des documents élaborés par des groupes de travail scientifiques,
universitaires et techniques (issus du secteur industriel). Les volontaires collaborant aux groupes de travail de
l’IEEE ne sont pas nécessairement des membres de l’Institut et aucune compensation ne leur est attribuée pour
leur participation. Bien que l’IEEE administre le processus et établisse des règles pour favoriser l’équité au cours
du processus de développement du consensus, l’IEEE n’évalue pas, ne soumet pas à essai ou ne vérifie pas de
manière indépendante l’exactitude des informations ni le bien-fondé de tous les jugements contenus dans ses
normes.
Les normes de l’IEEE ne fournissent ni garantie, ni assurance quant à la sûreté, la sécurité, la santé ou la protection
environnementale, et n’assurent pas de protection contre les interférences avec d’autres dispositifs ou réseaux ou
provenant de ceux-ci. Les personnes qui mettent en œuvre et celles qui utilisent les documents normatifs de l’IEEE
sont responsables de la détermination appropriée de la sûreté, de la sécurité, des pratiques environnementales,
sanitaires et de protection contre les interférences et de toutes les lois et réglementations applicables ainsi que de
la conformité à celles-ci.
L’IEEE ne garantit ni ne représente l’exactitude ou le contenu des informations contenues dans ses normes,
et décline expressément toute garantie (explicite, implicite et statutaire) non incluse dans le présent document ou
tout autre document en rapport avec la norme, y compris, sans toutefois s’y limiter, les garanties d’aptitude à la
commercialisation, d’adéquation à un usage particulier, de non-contrefaçon, ainsi que de qualité, précision,
efficacité, actualité ou intégrité des informations. De plus, l’IEEE renonce à toutes les conditions relatives aux
résultats et aux efforts professionnels. Les documents normatifs de l’IEEE sont fournis « EN L’ÉTAT » et
« AVEC TOUS LES DÉFAUTS ».
L’utilisation d’une norme IEEE est totalement volontaire. L’existence d’une norme IEEE n’implique pas qu’il n’y ait
pas d’autres manières de produire, de soumettre à essai, de mesurer, d’acheter, de commercialiser ou de fournir
d’autres biens et services qui se rapportent au domaine d’application de la norme IEEE. En outre, le point de vue
exprimé à l’instant où une norme est approuvée et publiée est soumis aux changements provoqués par les
développements dans l’état de la technique et les commentaires reçus des utilisateurs de la norme.
En publiant ses normes et en les rendant disponibles, l’IEEE ne suggère pas ou ne rend pas de services
professionnels ou autres pour une personne ou une entité quelconque, et n’entreprend pas non plus l’exécution
d’une responsabilité quelconque de toute autre personne ou entité envers une autre. Il est recommandé à toute
personne utilisant un document normatif de l’IEEE de s’appuyer sur son jugement indépendant en exerçant une
diligence raisonnable dans des circonstances données quelconques ou, selon le cas, de demander l’avis d’un
professionnel compétent pour déterminer la pertinence d’une norme IEEE donnée.
3
Copyright © 2020 IEEE. Tous droits réservés.

---------------------- Page: 6 ----------------------
ISO/IEEE 11073-10407:2022(F)
ISO/IEEE FDIS 11073-10407:2022(F)


EN AUCUN CAS L’IEEE NE SAURAIT ÊTRE TENUE POUR RESPONSABLE DE QUELCONQUES DOMMAGES DIRECTS,
INDIRECTS, INCIDENTS, SPÉCIAUX, EXEMPLAIRES OU CONSÉCUTIFS (Y COMPRIS, SANS TOUTEFOIS S’Y

LIMITER : ACHATS DE MARCHANDISES OU SERVICES DE REMPLACEMENT ; PERTE D’UTILISATION,
DE DONNÉES OU DE BÉNÉFICES ; OU INTERRUPTION D’ACTIVITÉ) CAUSÉS DE QUELQUE MANIÈRE QUE CE SOIT
ET SELON TOUTE THÉORIE DE RESPONSABILITÉ, QUE CE SOIT DANS LE CONTRAT, RESPONSABILITÉ STRICTE
OU DÉLICTUELLE (Y COMPRIS LA NÉGLIGENCE OU AUTRE), RÉSULTANT DE LA PUBLICATION, DE
L’UTILISATION OU DE LA CONFIANCE DE/EN TOUTE NORME, MÊME EN CAS D’INFORMATION DE LA
POSSIBILITÉ DE TELS DOMMAGES, ET INDÉPENDAMMENT DU FAIT QUE CES DOMMAGES ÉTAIENT
PRÉVISIBLES OU NON.
Traductions
Le processus de développement du consensus de l’IEEE implique l’examen de documents en anglais uniquement.
Si une norme de l’IEEE est traduite, il convient que seule la version anglaise publiée par l’IEEE soit considérée
comme la norme IEEE approuvée.
Déclarations officielles
Une déclaration, écrite ou orale, qui n’est pas traitée conformément au manuel des opérations du Conseil des
Normes IEEE-SA ne doit pas être considérée ou supposée être la position officielle de l’IEEE ou de l’un de ses
comités et ne doit pas être considérée comme une position officielle de l’IEEE, ni servir de base à une telle position.
Lors de conférences, de symposiums, de séminaires ou de cours de formation, une personne présentant des
informations sur les normes de l’IEEE doit indiquer clairement qu’il convient que ses points de vue soient
considérés comme les points de vue personnels de cette personne plutôt que comme la position officielle de l’IEEE.
Commentaires relatifs aux normes
Les commentaires visant à des révisions des documents normatifs de l’IEEE provenant de toute partie intéressée
sont les bienvenus, indépendamment de l’affiliation en tant que membre de l’IEEE. Toutefois, l’IEEE ne fournit pas
d’informations de consulting ou de conseils relatifs aux documents normatifs de l’IEEE. Il convient que des
suggestions pour des modifications aux documents se présentent sous la forme d’une modification de texte
proposée accompagnée des commentaires d’appui appropriés. Comme les normes de l’IEEE représentent un
consensus des intérêts concernés, il est important que toutes les réponses aux commentaires et aux questions
aient également reçu l’attention d’intérêts équilibrés. Pour cette raison, l’IEEE et les membres de ses sociétés et de
ses Comités de Coordination des Normes ne peuvent pas fournir une réponse instantanée aux commentaires ou
questions, excepté dans les cas où le sujet a précédemment été traité. Pour la même raison, l’IEEE ne répond pas
aux demandes d’interprétation. Toute personne désirant participer aux révisions d’une norme IEEE est invitée à
rejoindre le groupe de travail IEEE concerné.
Il convient d’adresser les commentaires sur les normes à :
Secretary, IEEE SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854 USA
Lois et règlements
Il est recommandé aux utilisateurs des documents normatifs de l’IEEE de consulter toutes les lois et
réglementations applicables. La conformité aux dispositions de tout document normatif de l’IEEE n’implique pas
la conformité à toutes les exigences réglementaires applicables. Il incombe aux personnes ou organismes mettant
en œuvre la norme d’observer les exigences réglementaires applicables ou d’y faire référence. L’IEEE n’a pas
l’intention, du fait de la publication de ses normes, de provoquer des actions qui ne sont pas conformes aux lois
applicables et ces documents ne peuvent pas être interprétés comme le faisant.
4
Copyright © 2020 IEEE. Tous droits réservés.

---------------------- Page: 7 ----------------------
ISO/IEEE 11073-10407:2022(F)
ISO/IEEE FDIS 11073-10407:2022(F)


Copyrights

Les projets de norme et normes approuvées de l’IEEE sont propriétés intellectuelles de l’IEEE en vertu des lois
américaines et internationales sur les droits d’auteur. Ils sont rendus disponibles par l’IEEE et sont adoptés pour
une grande diversité d’utilisations à la fois publiques et privées. Celles-ci incluent une utilisation, par référence,
dans les lois et réglementations et une utilisation dans l’auto-réglementation, la normalisation et la promotion de
pratiques et de méthodes d’ingénierie. En rendant ces documents disponibles en vue de leur utilisation et de leur
adoption par les autorités publiques et les utilisateurs privés, l’IEEE ne renonce à aucun droit de copyright sur ce
document.
Photocopies
Sous réserve du paiement des droits correspondants, l’IEEE accordera aux utilisateurs une licence limitée et non
exclusive pour photocopier des parties de toute norme individuelle en vue d’une utilisation interne par
l’entreprise ou l’organisation ou une utilisation exclusivement individuelle et non commerciale. Pour les
dispositions relatives au versement du droit de licence, contacter le Copyright Clearance Center, Customer Service,
222 Rosewood Drive, Danvers, MA 01923 États-Unis ; Tél. +1 978 750 8400. L’autorisation de photocopier des
parties d’une norme individuelle à des fins éducatives en classe peut également être obtenue auprès du Copyright
Clearance Center.
Mise à jour de documents normatifs de l’IEEE
Il convient que les utilisateurs des documents normatifs de l’IEEE soient informés du fait que ces documents
peuvent être remplacés à tout moment par la publication de nouvelles éditions ou peuvent être amendés de temps
à autre par le biais de la publication d’amendements, de correctifs ou d’errata. Un document IEEE officiel, à un
instant quelconque, est constitué de l’édition actuelle du document accompagnée de tous les amendements,
correctifs ou errata alors en vigueur.
Chaque norme IEEE est soumise à un examen au moins tous les 10 ans. Lorsqu’un document a plus de 10 ans et
n’a pas été soumis à un processus d’examen, il est raisonnable de conclure que son contenu, bien qu’il ait encore
une certaine valeur, ne reflète pas totalement l’état actuel de la technique. Les utilisateurs sont invités à s’assurer
qu’ils ont la dernière édition des normes IEEE.
Pour déterminer si un document donné est l’édition actuelle et s’il a été amendé par le biais de la publication
d’amendements, de correctifs ou d’errata, il convient de visiter le site IEEE Xplore à l’adresse
https://ieeexplore.ieee.org/ ou de contacter l’IEEE à l’adresse citée précédemment. Pour de plus amples
informations sur l’IEEE SA ou le processus de développement des normes IEEE, visiter le site Web de l’IEEE SA à
l’adresse https://standards.ieee.org.
Errata
Les éventuels errata pour les normes de l’IEEE sont accessibles à l’adresse
lhttps://standards.ieee.org/standard/index.html. Rechercher le numéro de la norme et l’année d’approbation
pour accéder à la page Web de la norme publiée. Les liens vers les errata se trouvent dans la section Détails des
ressources supplémentaires. Les errata sont également disponibles dans IEEE Xplore :
https://ieeexplore.ieee.org/browse/standards/collection/ieee/. Les utilisateurs sont encouragés à vérifier
périodiquement les errata.
5
Copyright © 2020 IEEE. Tous droits réservés.

---------------------- Page: 8 ----------------------
ISO/IEEE 11073-10407:2022(F)
ISO/IEEE FDIS 11073-10407:2022(F)


Brevets

L’attention est appelée sur la possibilité que la mise en œuvre de la présente norme puisse requérir l’utilisation
d’un objet couvert par des droits de propriété intellectuelle ou des droits analogues. Du fait de la publication de la
présente norme, aucune position n’est adoptée en ce qui concerne l’existence ou la validité de quelconques droits
de brevet en rapport avec celle-ci. Si le détenteur d’un brevet ou le demandeur d’un brevet a déposé une
déclaration d’assurance par l’intermédiaire d’une lettre d’assurance acceptée, la déclaration est alors répertoriée
sur le site Web de l’IEEE-SA https://standards.ieee.org/about/sasb/patcom/patents.html. Les lettres d’assurance
peuvent indiquer si le déposant accepte ou non d’accorder des licences dans le cadre de ces droits sans
compensation ou avec des redevances raisonnables, avec des termes et conditions raisonnables dont il peut être
démontré qu’ils sont exempts de toute discrimination inéquitable pour les demandeurs désirant obtenir de telles
licences.
D’autres revendications essentielles de brevets peuvent exister, pour lesquelles une lettre d’assurance n’a pas été
reçue. Il n’incombe pas à l’IEEE d’identifier les Essential Patent Claims (Revendications Essentielles de Brevets)
pour lesquelles une licence peut être requise, d’exécuter des enquêtes portant sur la validité légale ou la portée
des revendications de brevet ou de déterminer si des termes ou conditions d’attribution de licence fournis en
rapport avec la soumission d’une lettre d’assurance, le cas échéant, ou dans des accords d’attribution de licence
quelconques sont raisonnables ou non discriminatoires. Les utilisateurs de la présente norme sont expressément
avisés que la détermination de la validité de tout droit de brevet et le risque de violation de ces droits leur
incombent entièrement. Des informations supplémentaires peuvent être obtenues auprès de l’Association des
normes IEEE.
6
Copyright © 2020 IEEE. Tous droits réservés.

---------------------- Page: 9 ----------------------
ISO/IEEE 11073-10407:2022(F)
ISO/IEEE FDIS 11073-10407:2022(F)



Participants
Au moment de l’achèvement de la présente norme IEEE, le Groupe de travail Dispositifs de santé personnels
comprenait les membres suivants :
Daidi Zhong, Co-président
Michael Kirwan, Co-président

Karsten Aalders Hans Crommenacker Charles Henderson
Charles R. Abbruscato Tomio Crosley Jun-Ho Her
Nabil Abujbara Allen Curtis Helen B. Hernandez
Maher Abuzaid Jesús Daniel Trigo Timothy L. Hirou
James Agnew David Davenport Allen Hobbs
Manfred Aigner Russell Davis Alex Holland
Jorge Alberola Sushil K. Deka Arto Holopainen
David Aparisi Ciro de la Vega Kris Holtzclaw
Lawrence Arne Pedro de-las-Heras-Quiros Xinyi Hong
Diego B. Arquillo Jim Dello Stritto Robert Hoy
Serafin Arroyo Kent Dicks Di Hu
Muhammad Asim Hyoungho Do Anne Huang
Kit August Jonathan Dougherty Ron Huby
Doug Baird Xiaolian Duan David Hughes
David Baker Sourav Dutta Robert D. Hughes
Anindya Bakshi Jakob Ehrensvard Jiyoung Huh
Ananth Balasubramanian Fredrik Einberg Hugh Hunter
Sunlee Bang Javier Escayola Calvo Philip O. Isaacson
M. Jonathan Barkley Mark Estes Atsushi Ito
Gilberto Barrón Leonardo Estevez Michael Jaffe
David Bean Bosco T. Fernandes Praduman Jain
John Bell Christoph Fischer Hu Jin
Olivia Bellamou-Huet Morten Flintrup Danny Jochelson
Rudy Belliardi Joseph W. Forler Akiyoshi Kabe
Daniel Bernstein Russell Foster Steve Kahle
George A. Bertos Eric Freudenthal Tomio Kamioka
Chris Biernacki Matthias Frohner James J. Kang
Ola Björsne Ken Fuchs Kei Kariya
Thomas Blackadar Jing Gao Andy Kaschl
Thomas Bluethner Marcus Garbe Junzo Kashihara
Douglas P. Bogia John Garguilo Colin Kennedy
Xavier Boniface Rick Geimer Ralph Kent
Shannon Boucousis Igor Gejdos Laurie M. Kermes
Julius Broma Ferenc Gerbovics Ahmad Kheirandish
Lyle G. Bullock, Jr. Alan Godfrey Junhyung Kim
Bernard Burg Nicolae Goga Minho Kim
Chris Burns Julian Goldman Min-Joon Kim
Jeremy Byford-Rew Raul Gonzalez Gomez Taekon Kim
Satya Calloji Chris Gough Tetsuya Kimura
Carole C. Carey Channa Gowda Alfred Kloos
Craig Carlson Charles M. Gropper Jeongmee Koh
Santiago Carot-Nemesio Amit Gupta Jean-Marc Koller
Randy W. Carroll Jeff Guttmacher John Koon
Seungchul Chae Rasmus Haahr Patty Krantz
Peggy Chien Christian Habermann Raymond Krasinski
David Chiu Michael Hagerty Alexander Kraus
Jinyong Choi Jerry Hahn Ramesh Krishna
Chia-Chin Chong Robert Hall Geoffrey Kruse
Saeed A. Choudhary Shu Han Falko Kuester
Jinhan Chung Nathaniel Hamming Rafael Lajara
John A. Cogan Rickey L. Hampton Pierre Landau
John T. Collins Sten Hanke Jaechul Lee
Cory Condek Aki Harma Jong-Muk Lee
Todd H. Cooper Jordan Hartmann Kyong Ho Lee
David Cornejo Kai Hassing Rami Lee
Douglas Coup Wolfgang Heck Sungkee Lee
Nigel Cox Nathaniel Heintzman Woojae Lee
7
Copyright © 2020 IEEE. Tous droits réservés.

---------------------- Page: 10 ----------------------
ISO/IEEE 11073-10407:2022(F)
ISO/IEEE FDIS 11073-10407:2022(F)


Qiong Li Tong-Bi Pei Hermanni Suominen
Xiangchen Li Soren Petersen Lee Surprenant

Yingsong Li James Petisce Ravi Swami
Zhuofang Li Peter Piction Ray Sweidan
Patrick Lichter Michael Pliskin Na Tang
Lin Lin Varshney Prabodh Haruyuyki Tatsumi
Jisoon Lim Jeff Price Isabel Tejero
Joon-Ho Lim Harald Prinzhorn Tom Thompson
Liang Liu Harry Qiu Jonas Tirén
Xiaoming Liu Tanzilur Rahman Janet Traub
Wei-Jung Lo Phillip Raymond Gary Tschautscher
Charles Lowe Terrie Reed Masato Tsuchid
Don Ludolph Barry Reinhold Ken Tubman
Christian Luszick Brian Reinhold Akib Uddin
Bob MacWilliams Melvin I. Reynolds Sunil Unadkat
Srikkanth Madhurbootheswaran John G. Rhoads Fabio Urbani
Miriam L. Makhlouf Jeffrey S. Robbins Philipp Urbauer
Romain Marmot Chris Roberts Laura Vanzago
Sandra Martinez Moskowitz Robert Alpo Värri
Miguel Martínez de Espronceda Stefan Robert Andrei Vasilateanu
Cámara Scott M. Robertson Dalimar Velez
Peter Mayhew Timothy Robertson Martha Velezis
Jim McCain David Rosales Rudi Voon
László Meleg Bill Saltzstein Barry Vornbrock
Alexander Mense Giovanna Sannino Isobel Walker
Behnaz Minaei Jose A. Santos-Cadenas David Wang
Jinsei Miyazaki Stefan Sauermann Linling Wang
Erik Moll John Sawyer Jerry P. Wang
Darr Moore AloisSchloegl Yao Wang
Chris Morel Paul S. Schluter Yi Wang
Carsten Mueglitz Mark G. Schnell Steve Warren
Soundharya Nagasubramanian Richard A. Schrenker Fujio Watanabe
Alex Neefus Antonio Scorpiniti Toru Watsuji
Trong-Nghia Nguyen-Dobinsky KwangSeok Seo Kathleen Wible
Michael E. Nidd Riccardo Serafin Paul Williamson
Jim Niswander Sid Shaw Jan Wittenber
Hiroaki Niwamoto Frank Shen Jia-Rong Wu
Thomas Norgall Min Shih Will Wykeham
Yoshiteru Nozoe Mazen Shihabi Ariton Xhafa
Abraham Ofek Redmond Shouldice Ricky Yang
Brett Olive Sternly K. Simon Melanie S. Yeung
Marjorie Skubic Qiang Yin
BegonyaOtal Robert Smith Done-Sik Yoo
Marco Paleari Ivan Soh Zhi Yu
Bud Panjwani Motoki Sone Jianchao Zeng
Carl Pantiskas Emily Sopensky Jason Zhang
Harry P. Pappas Rajagopalan Srinivasan Jie Zhao
Hanna Park Nicholas Steblay Thomas Zhao
Jong-Tae Park Lars Steubesand Yuanhong Zhong
Myungeun Park John (Ivo) Stivoric Miha Zoubek
Soojun Park Raymond A. Strickland Szymon Zyskoter
Phillip E. Pash Chandrasekaran Subramaniam

La présente norme a été votée par les membres suivants du comité de vote individuel de l’Association des normes.
Les votants peuvent avoir voté son approbation, sa désapprobation ou s’être abstenus.
Robert Aiello Werner Hoelzl Iulian Profir
Bjoern Andersen Noriyuki Ikeuchi Beth Pumo
Lyle G. Bullock, Jr. Atsushi Ito Stefan Schlichting
Keith Chow Raj Jain Janek Schumann
Malcolm Clarke Piotr Karocki Walter Struppler
David Fuschi Raymond Krasinski Oren Yuen
Randall Groves H. Moll Janusz Zalewski
Nathaniel Hamming Daidi Zhong
8
Copyright © 2020 IEEE. Tous droits réservés.

---------------------- Page: 11 ----------------------
ISO/IEEE 11073-10407:2022(F)
ISO/IEEE FDIS 11073-10407:2022(F)




Lorsque le Conseil des Normes IEEE-SA a approuvé la présente norme le 30 janvier 2020, il comprenait les
membres suivants :
Gary Hoffman, président
Position vacante, vice-président
Jean-Philippe Faure, ancien président
Konstantinos Karachalios, Secrétaire
Ted Burse Howard Li Dorothy Stanley
J. Travis Griffith Dong Liu Mehmet Ulema
Grace Gu Kevin Lu Lei Wang
Guido R. Hiertz Paul Nikolich Sha Wei
Joseph L. Koepfinger* Damir Novosel Philip B. Winston
John D. Kulick Jon Walter Rosdahl Daidi Zhong
David J. Law Jingyi Zhou
*Membre émérite

9
Copyright © 2020 IEEE. Tous droits réservés.

---------------------- Page: 12 ----------------------
ISO/IEEE 11073-10407:2022(F)
ISO/IEEE FDIS 11073-10407:2022(F)


Introduction

Cette introduction ne fait pas partie de la norme IEEE 11073-10407-2020, Informatique de santé — Communication entre
dispositifs de santé personnels — Partie 10407 : Spécialisations des dispositifs — Moniteur de pression sanguine.
Les normes ISO/IEEE 11073 permettent des communications entre des dispositifs médicaux et des systèmes
1
informatiques externes. Le présent document utilise le cadre optimisé créé dans l’IEEE 11073-20601™-2019 et
a
décrit une approche de communication spécifique et interopérable pour les moniteurs de pression artérielle. Ces
normes s’alignent sur les normes existantes axées sur le milieu clinique et se servent de celles-ci pour offrir la
prise en charge de la communication des données provenant de dispositifs de santé personnels.


a
Pour des informations sur les références, voir l’Article 2.
10
Copyright © 2020 IEEE. Tous droits réservés.

---------------------- Page: 13
...

INTERNATIONAL STANDARD
ISO/IEEE FDIS 11073-10407:2022(E)
ISO/TC 215
Secretariat: ANSI
Health informatics — Device interoperability —
Part 10407: Personal health device communication — Device specialization —
Blood pressure monitor
© IEEE 2020 – All rights reserved

---------------------- Page: 1 ----------------------
ISO/IEEE FDIS 11073-10407:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national standards bodies (ISO member bodies). The work of preparing International
Standards is normally carried out through ISO technical committees. Each member body
interested in a subject for which a technical committee has been established has the right to
be represented on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with
the International Electrotechnical Commission (IEC) on all matters of electrotechnical
standardization.
The procedures used to develop this document and those intended for its further
maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different
approval criteria needed for the different types of ISO documents should be noted (see
www.iso.org/directives).
IEEE Standards documents are developed within the IEEE Societies and the Standards
Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board.
The IEEE develops its standards through a consensus development process, approved by
the American National Standards Institute, which brings together volunteers representing
varied viewpoints and interests to achieve the final product. Volunteers are not necessarily
members of the Institute and serve without compensation. While the IEEE administers the
process and establishes rules to promote fairness in the consensus development process,
the IEEE does not independently evaluate, test, or verify the accuracy of any of the
information contained in its standards.
Attention is drawn to the possibility that some of the elements of this document may be the
subject of patent rights. ISO shall not be held responsible for identifying any or all such
patent rights. Details of any patent rights identified during the development of the
document will be in the Introduction and/or on the ISO list of patent declarations received
(see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and
does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms
and expressions related to conformity assessment, as well as information about ISO's
adherence to the World Trade Organization (WTO) principles in the Technical Barriers to
Trade (TBT), see www.iso.org/iso/foreword.html.
ISO/IEEE 11073-10407 was prepared by the IEEE 11073 Standards Committee of the IEEE
Engineering in Medicine and Biology Society (as IEEE Std 11073-10407-2020) and drafted in
accordance with its editorial rules. It was adopted, under the “fast-track procedure” defined
in the Partner Standards Development Organization cooperation agreement between ISO
and IEEE, by Technical Committee ISO/TC 215, Health informatics.
This second edition cancels and replaces the first edition (ISO/IEEE 11073-10407:2010),
which has been technically revised.
A list of all parts in the ISO/IEEE 11073 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national
standards body. A complete listing of these bodies can be found at
www.iso.org/members.html.
Copyright © 2020 IEEE. All rights reserved.

---------------------- Page: 2 ----------------------
IEEE Std 11073-10407™-2020
(Revision of IEEE Std 11073-10407-2008)
Health informatics—Personal health device communication
Part 10407: Device specialization—
Blood pressure monitor
Developed by the

IEEE 11073™ Standards Committee
of the
IEEE Engineering in Medicine and Biology Society


Approved 30 January 2020

IEEE SA Standards Board

---------------------- Page: 3 ----------------------
Abstract: Within the context of the ISO/IEEE 11073 family of standards for device
communication, this standard establishes a normative definition of communication between
personal telehealth blood pressure monitor devices and compute engines (e.g., cell phones,
personal computers, personal health appliances, and set top boxes) in a manner that enables
plug-and-play interoperability. It leverages appropriate portions of existing standards including
ISO/IEEE 11073 terminology, information models, application profile standards, and transport
standards. It specifies the use of specific term codes, formats, and behaviors in telehealth
environments restricting optionality in base frameworks in favor of interoperability. This standard
defines a common core of communication functionality for personal telehealth blood pressure
monitors.

Keywords: blood pressure monitor, IEEE 11073-10407™, medical device communication,
personal health devices



The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA

Copyright © 2020 by The Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 30 April 2020. Printed in the United States of America.

IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics Engineers,
Incorporated.

PDF: ISBN 978-1-5044-6460-4 STD24062
Print: ISBN 978-1-5044-6461-1 STDPD24062

IEEE prohibits discrimination, harassment, and bullying.
For more information, visit https://www.ieee.org/about/corporate/governance/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission
of the publisher.

---------------------- Page: 4 ----------------------
Important Notices and Disclaimers Concerning IEEE Standards Documents
IEEE documents are made available for use subject to important notices and legal disclaimers. These
notices and disclaimers, or a reference to this page, appear in all standards and may be found under the
heading “Important Notices and Disclaimers Concerning IEEE Standards Documents.” They can also be
obtained on request from IEEE or viewed at https://standards.ieee.org/ipr/disclaimers.html.
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are
developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards
Association (“IEEE SA”) Standards Board. IEEE (“the Institute”) develops its standards through a
consensus development process, approved by the American National Standards Institute (“ANSI”), which
brings together volunteers representing varied viewpoints and interests to achieve the final product. IEEE
Standards are documents developed through scientific, academic, and industry-based technical working
groups. Volunteers in IEEE working groups are not necessarily members of the Institute and participate
without compensation from IEEE. While IEEE administers the process and establishes rules to promote
fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the
accuracy of any of the information or the soundness of any judgments contained in its standards.
IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure
against interference with or from other devices or networks. Implementers and users of IEEE Standards
documents are responsible for determining and complying with all appropriate safety, security,
environmental, health, and interference protection practices and all applicable laws and regulations.
IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and
expressly disclaims all warranties (express, implied and statutory) not included in this or any other
document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness
for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness
of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort.
IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”
Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there
are no other ways to produce, test, measure, purchase, market, or provide other goods and services related
to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved
and issued is subject to change brought about through developments in the state of the art and comments
received from users of the standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or other
services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any
other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his
or her own independent judgment in the exercise of reasonable care in any given circumstances or, as
appropriate, seek the advice of a competent professional in determining the appropriateness of a given
IEEE standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO:
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE
UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND
REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.

5
Copyright © 2020 IEEE. All rights reserved.

---------------------- Page: 5 ----------------------
Translations
The IEEE consensus development process involves the review of documents in English only. In the event
that an IEEE standard is translated, only the English version published by IEEE should be considered the
approved IEEE standard.
Official statements
A statement, written or oral, that is not processed in accordance with the IEEE SA Standards Board
Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its
committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures,
symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall
make it clear that his or her views should be considered the personal views of that individual rather than the
formal position of IEEE.
Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of
membership affiliation with IEEE. However, IEEE does not provide consulting information or advice
pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a
proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a
consensus of concerned interests, it is important that any responses to comments and questions also receive
the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and
Standards Coordinating Committees are not able to provide an instant response to comments or questions
except in those cases where the matter has previously been addressed. For the same reason, IEEE does not
respond to interpretation requests. Any person who would like to participate in revisions to an IEEE
standard is welcome to join the relevant IEEE working group.
Comments on standards should be submitted to the following address:
Secretary, IEEE SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854 USA
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with
the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory
requirements. Implementers of the standard are responsible for observing or referring to the applicable
regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not
in compliance with applicable laws, and these documents may not be construed as doing so.
Copyrights
IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws.
They are made available by IEEE and are adopted for a wide variety of both public and private uses. These
include both use, by reference, in laws and regulations, and use in private self-regulation, standardization,
and the promotion of engineering practices and methods. By making these documents available for use and
adoption by public authorities and private users, IEEE does not waive any rights in copyright to the
documents.

6
Copyright © 2020 IEEE. All rights reserved.

---------------------- Page: 6 ----------------------
Photocopies
Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to
photocopy portions of any individual standard for company or organizational internal use or individual,
non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance
Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission
to photocopy portions of any individual standard for educational classroom use can also be obtained
through the Copyright Clearance Center.
Updating of IEEE Standards documents
Users of IEEE Standards documents should be aware that these documents may be superseded at any time
by the issuance of new editions or may be amended from time to time through the issuance of amendments,
corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the
document together with any amendments, corrigenda, or errata then in effect.
Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years
old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of
some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that
they have the latest edition of any IEEE standard.
In order to determine whether a given document is the current edition and whether it has been amended

through the issuance of amendments, corrigenda, or errata, visit IEEE Xplore at https://ieeexplore.ieee.org/
or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEE’s
standards development process, visit the IEEE SA Website at https://standards.ieee.org.
Errata
Errata, if any, for IEEE standards can be accessed via https://standards.ieee.org/standard/index.html. Search
for standard number and year of approval to access the web page of the published standard. Errata links are
located under the Additional Resources Details section. Errata are also available in IEEE Xplore:
https://ieeexplore.ieee.org/browse/standards/collection/ieee/. Users are encouraged to periodically check for
errata.
Patents
Attention is called to the possibility that implementation of this standard may require use of subject matter
covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to
the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant
has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the
IEEE SA Website at https://standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may
indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without
compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of
any unfair discrimination to applicants desiring to obtain such licenses.
Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not
responsible for identifying Essential Patent Claims for which a license may be required, for conducting
inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or
conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing
agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that
determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely
their own responsibility. Further information may be obtained from the IEEE Standards Association.

7
Copyright © 2020 IEEE. All rights reserved.

---------------------- Page: 7 ----------------------
Participants
At the time this IEEE standard was completed, the Personal Health Device Working Group had the
following membership:
Daidi Zhong, Co-Chair
Michael J. Kirwan, Co-Chair

Karsten Aalders Cory Condek Robert Hall
Charles R. Abbruscato Todd H. Cooper Shu Han
Nabil Abujbara David Cornejo Nathaniel Hamming
Maher Abuzaid Douglas Coup Rickey L. Hampton
James Agnew Sten Hanke
Nigel Cox
Manfred Aigner Hans Crommenacker Aki Harma
Jorge Alberola Tomio Crosley Jordan Hartmann
David Aparisi Allen Curtis Kai Hassing
Lawrence Arne Jesús Daniel Trigo Wolfgang Heck
Diego B. Arquillo David Davenport Nathaniel Heintzman
Serafin Arroyo Charles Henderson
Russell Davis
Muhammad Asim Sushil K. Deka Jun-Ho Her
Kit August Ciro de la Vega Helen B. Hernandez
Doug Baird Timothy L. Hirou
Pedro de-las-Heras-Quiros
David Baker Jim Dello Stritto Allen Hobbs
Anindya Bakshi Kent Dicks Alex Holland
Ananth Balasubramanian Hyoungho Do Arto Holopainen
Sunlee Bang Jonathan Dougherty Kris Holtzclaw
M. Jonathan Barkley Xiaolian Duan Xinyi Hong
Gilberto Barrón Sourav Dutta Robert Hoy
David Bean Jakob Ehrensvard Di Hu
John Bell Fredrik Einberg Anne Huang
Olivia Bellamou-Huet Javier Escayola Calvo Ron Huby
Rudy Belliardi Mark Estes David Hughes
Daniel Bernstein Leonardo Estevez Robert D. Hughes
George A. Bertos Bosco T. Fernandes Jiyoung Huh
Chris Biernacki Christoph Fischer Hugh Hunter
Ola Björsne Morten Flintrup Philip O. Isaacson
Thomas Blackadar Joseph W. Forler Atsushi Ito
Thomas Bluethner Russell Foster Michael Jaffe
Douglas P. Bogia Eric Freudenthal Praduman Jain
Xavier Boniface Matthias Frohner Hu Jin
Shannon Boucousis Ken Fuchs Danny Jochelson
Julius Broma Jing Gao Akiyoshi Kabe
Lyle G. Bullock, Jr. Marcus Garbe Steve Kahle
Bernard Burg John Garguilo Tomio Kamioka
Chris Burns Rick Geimer James J. Kang
Jeremy Byford-Rew Igor Gejdos Kei Kariya
Satya Calloji Ferenc Gerbovics Andy Kaschl
Carole C. Carey Alan Godfrey Junzo Kashihara
Craig Carlson Nicolae Goga Colin Kennedy
Santiago Carot-Nemesio Julian Goldman Ralph Kent
Randy W. Carroll Raul Gonzalez Gomez
Laurie M. Kermes
Seungchul Chae Chris Gough Ahmad Kheirandish
Peggy Chien Channa Gowda Junhyung Kim
David Chiu Charles M. Gropper
Minho Kim
Jinyong Choi Amit Gupta Min-Joon Kim
Chia-Chin Chong Jeff Guttmacher Taekon Kim
Rasmus Haahr
Saeed A. Choudhary Tetsuya Kimura
Jinhan Chung Christian Habermann Alfred Kloos
John A. Cogan Michael Hagerty Jeongmee Koh
Jerry Hahn
John T. Collins Jean-Marc Koller

8
Copyright © 2020 IEEE. All rights reserved.

---------------------- Page: 8 ----------------------
John Koon BegonyaOtal Nicholas Steblay
Patty Krantz Marco Paleari Lars Steubesand
Raymond Krasinski Bud Panjwani John (Ivo) Stivoric
Alexander Kraus Carl Pantiskas Raymond A. Strickland
Ramesh Krishna Harry P. Pappas Chandrasekaran Subramaniam
Geoffrey Kruse Hanna Park Hermanni Suominen
Falko Kuester Jong-Tae Park Lee Surprenant
Rafael Lajara Myungeun Park Ravi Swami
Pierre Landau Soojun Park Ray Sweidan
Jaechul Lee Phillip E. Pash Na Tang
Jong-Muk Lee Tong-Bi Pei Haruyuyki Tatsumi
Kyong Ho Lee Soren Petersen Isabel Tejero
Rami Lee James Petisce Tom Thompson
Sungkee Lee Peter Piction Jonas Tirén
Woojae Lee Michael Pliskin Janet Traub
Qiong Li Varshney Prabodh Gary Tschautscher
Xiangchen Li Masato Tsuchid
Jeff Price
Yingsong Li Harald Prinzhorn Ken Tubman
Zhuofang Li Harry Qiu Akib Uddin
Patrick Lichter Sunil Unadkat
Tanzilur Rahman
Lin Lin Phillip Raymond Fabio Urbani
Jisoon Lim Terrie Reed Philipp Urbauer
Joon-Ho Lim
Barry Reinhold Laura Vanzago
Liang Liu Brian Reinhold Alpo Värri
Xiaoming Liu Melvin I. Reynolds Andrei Vasilateanu
Wei-Jung Lo Dalimar Velez
John G. Rhoads
Charles Lowe Jeffrey S. Robbins Martha Velezis
Don Ludolph Chris Roberts Rudi Voon
Christian Luszick Moskowitz Robert Barry Vornbrock
Bob MacWilliams Stefan Robert Isobel Walker
Srikkanth Madhurbootheswaran Scott M. Robertson David Wang
Miriam L. Makhlouf
Timothy Robertson Linling Wang
Romain Marmot David Rosales Jerry P. Wang
Sandra Martinez Bill Saltzstein Yao Wang
Giovanna Sannino
Miguel Martínez de Espronceda Yi Wang
Cámara Jose A. Santos-Cadenas Steve Warren
Peter Mayhew Stefan Sauermann Fujio Watanabe
John Sawyer
Jim McCain Toru Watsuji
László Meleg AloisSchloegl Kathleen Wible
Alexander Mense Paul S. Schluter Paul Williamson
Behnaz Minaei Mark G. Schnell Jan Wittenber
Jinsei Miyazaki Richard A. Schrenker Jia-Rong Wu
Erik Moll Antonio Scorpiniti Will Wykeham
Darr Moore KwangSeok Seo Ariton Xhafa
Chris Morel Riccardo Serafin Ricky Yang
Carsten Mueglitz Sid Shaw Melanie S. Yeung
Soundharya Nagasubramanian Frank Shen Qiang Yin
Alex Neefus Min Shih Done-Sik Yoo
Trong-Nghia Nguyen-Dobinsky Mazen Shihabi Zhi Yu
Michael E. Nidd Redmond Shouldice Jianchao Zeng
Jim Niswander Sternly K. Simon Jason Zhang
Hiroaki Niwamoto Marjorie Skubic Jie Zhao
Thomas Norgall Robert Smith Thomas Zhao
Yoshiteru Nozoe Ivan Soh Yuanhong Zhong
Abraham Ofek Motoki Sone Miha Zoubek
Brett Olive Emily Sopensky Szymon Zyskoter
Rajagopalan Srinivasan


9
Copyright © 2020 IEEE. All rights reserved.

---------------------- Page: 9 ----------------------
The following members of the individual Standards Association balloting group voted on this standard.
Balloters may have voted for approval, disapproval, or abstention.
Robert Aiello Werner Hoelzl Iulian Profir
Bjoern Andersen Noriyuki Ikeuchi Beth Pumo
Lyle G. Bullock, Jr. Atsushi Ito Stefan Schlichting
Keith Chow Raj Jain Janek Schumann
Malcolm Clarke Piotr Karocki Walter Struppler
David Fuschi Raymond Krasinski Oren Yuen
Randall Groves H. Moll Janusz Zalewski
Nathaniel Hamming Daidi Zhong

When the IEEE SA Standards Board approved this standard on 30 January 2020, it had the following
membership:
Gary Hoffman, Chair
Vacant Position, Vice Chair
Jean-Philippe Faure, Past Chair
Konstantinos Karachalios, Secretary
Ted Burse Howard Li Dorothy Stanley
J. Travis Griffith Dong Liu Mehmet Ulema
Grace Gu Kevin Lu Lei Wang
Guido R. Hiertz Paul Nikolich Sha Wei
Joseph L. Koepfinger* Damir Novosel Philip B. Winston
John D. Kulick Jon Walter Rosdahl Daidi Zhong
David J. Law Jingyi Zhou
*Member Emeritus


10
Copyright © 2020 IEEE. All rights reserved.

---------------------- Page: 10 ----------------------
Introduction
This introduction is not part of IEEE Std 11073-10407-2020, Health informatics—Personal health device
communication—Part 10407: Device specialization—Blood pressure monitor.
ISO/IEEE 11073 standards enable communication between medical devices and external computer systems.
This document uses the optimized framework created in IEEE Std 11073-20601™-2019 and describes a
a
specific, interoperable communication approach for blood pressure monitors. These standards align with
and draw on the existing clinically focused standards to provide support for communication of data from
personal health devices.


a
Information on references can be found in Clause 2.

11
Copyright © 2020 IEEE. All rights reserved.

---------------------- Page: 11 ----------------------
Contents
1. Overview .14
1.1 Scope .14
1.2 Purpose .14
1.3 Word usage .15
1.4 Context .15
2. Normative references .15
3. Definitions, acronyms, and abbreviations .16
3.1 Definitions .16
3.2 Acronyms and abbreviations .17
4. Introduction to ISO/IEEE 11073 personal health devices .17
4.1 General .17
4.2 Introduction to IEEE 11073-20601 modeling constructs .18
4.3 Compliance with other standards .19
5. Blood pressure monitor device concepts and modalities .19
5.1 General .19
5.2 Systolic and diastolic pressure .20
5.3 Mean arterial pressure.20
5.4 Pulse rate .20
5.5 Blood pressure measurement status .20
6. Blood pressure monitor domain information model .20
6.1 Overview .20
6.2 Class extensions .20
6.3 Object instance diagram .20
6.4 Types of configuration .22
6.5 Medical device system object .22
6.6 Numeric objects .27
6.7 Real-time sample array objects .32
6.8 Enumeration objects .36
6.9 PM-store objects .37
6.10 Scanner objects .37
6.11 Class extension objects .38
6.12 Blood pressure monitor information model extensibility rules.38
7. Blood pressure monitor service model .38
7.1 General .38
7.2 Object access services.38
7.3 Object access event report services .
...

FINAL
INTERNATIONAL ISO/IEEE
DRAFT
STANDARD FDIS
11073-10407
ISO/TC 215
Health informatics — Device
Secretariat: ANSI
interoperability —
Voting begins on:
2022-06-16
Part 10407:
Voting terminates on:
Personal health device communication
2022-11-03
— Device specialization — Blood
pressure monitor
Informatique de santé — Interopérabilité des dispositifs —
Partie 10407: Communication entre dispositifs de santé personnels —
Spécialisation des dispositifs — Moniteur de pression sanguine
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/IEEE FDIS 11073-10407:2022(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © IEEE 2022

---------------------- Page: 1 ----------------------
ISO/IEEE FDIS 11073-10407:2022(E)
FINAL
INTERNATIONAL ISO/IEEE
DRAFT
STANDARD FDIS
11073-10407
ISO/TC 215
Health informatics — Device
Secretariat: ANSI
interoperability —
Voting begins on:
Part 10407:
Voting terminates on:
Personal health device communication
— Device specialization — Blood
pressure monitor
Informatique de santé — Interopérabilité des dispositifs —
Partie 10407: Communication entre dispositifs de santé personnels —
Spécialisation des dispositifs — Moniteur de pression sanguine
COPYRIGHT PROTECTED DOCUMENT
ISO/CEN PARALLEL PROCESSING
© IEEE 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from IEEE at the address below.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
Institute of Electrical and Electronics Engineers, Inc
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
3 Park Avenue, New York
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
NY 10016-5997, USA
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: stds.ipr@ieee.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/IEEE FDIS 11073­10407:2022(E)
Website: www.ieee.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN­
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
  © IEEE 2022 – All rights reserved
NATIONAL REGULATIONS. © IEEE 2022

---------------------- Page: 2 ----------------------
ISO/IEEE FDIS 11073-10407:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted (see www.iso.org/directives).
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its
standards through a consensus development process, approved by the American National Standards
Institute, which brings together volunteers representing varied viewpoints and interests to achieve the
final product. Volunteers are not necessarily members of the Institute and serve without compensation.
While the IEEE administers the process and establishes rules to promote fairness in the consensus
development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the
information contained in its standards.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on
the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the World
Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
ISO/IEEE 11073-10407 was prepared by the IEEE 11073 Standards Committee of the IEEE Engineering in
Medicine and Biology Society (as IEEE Std 11073-10407-2020) and drafted in accordance with its editorial
rules. It was adopted, under the “fast-track procedure” defined in the Partner Standards Development
Organization cooperation agreement between ISO and IEEE, by Technical Committee ISO/TC 215, Health
informatics.
This second edition cancels and replaces the first edition (ISO/IEEE 11073-10407:2010), which has been
technically revised.
A list of all parts in the ISO/IEEE 11073 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
© IEEE 2020 – All rights reserved iii

---------------------- Page: 3 ----------------------
IEEE Std 11073-10407™-2020
(Revision of IEEE Std 11073-10407-2008)
Health informatics—Personal health device communication
Part 10407: Device specialization—
Blood pressure monitor
Developed by the

IEEE 11073™ Standards Committee
of the
IEEE Engineering in Medicine and Biology Society


Approved 30 January 2020

IEEE SA Standards Board

---------------------- Page: 4 ----------------------
ISO/IEEE 11073-10407:2022(E)
Abstract: Within the context of the ISO/IEEE 11073 family of standards for device
communication, this standard establishes a normative definition of communication between
personal telehealth blood pressure monitor devices and compute engines (e.g., cell phones,
personal computers, personal health appliances, and set top boxes) in a manner that enables
plug-and-play interoperability. It leverages appropriate portions of existing standards including
ISO/IEEE 11073 terminology, information models, application profile standards, and transport
standards. It specifies the use of specific term codes, formats, and behaviors in telehealth
environments restricting optionality in base frameworks in favor of interoperability. This standard
defines a common core of communication functionality for personal telehealth blood pressure
monitors.
Keywords: blood pressure monitor, IEEE 11073-10407™, medical device communication,
personal health devices

The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2020 by The Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 30 April 2020. Printed in the United States of America.
IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics Engineers,
Incorporated.
PDF: ISBN 978-1-5044-6460-4 STD24062
Print: ISBN 978-1-5044-6461-1 STDPD24062
IEEE prohibits discrimination, harassment, and bullying.
For more information, visit https://www.ieee.org/about/corporate/governance/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission
of the publisher.

---------------------- Page: 5 ----------------------
ISO/IEEE 11073-10407:2022(E)

Important Notices and Disclaimers Concerning IEEE Standards Documents
IEEE documents are made available for use subject to important notices and legal disclaimers. These
notices and disclaimers, or a reference to this page, appear in all standards and may be found under the
heading “Important Notices and Disclaimers Concerning IEEE Standards Documents.” They can also be
obtained on request from IEEE or viewed at https://standards.ieee.org/ipr/disclaimers.html.
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are
developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards
Association (“IEEE SA”) Standards Board. IEEE (“the Institute”) develops its standards through a
consensus development process, approved by the American National Standards Institute (“ANSI”), which
brings together volunteers representing varied viewpoints and interests to achieve the final product. IEEE
Standards are documents developed through scientific, academic, and industry-based technical working
groups. Volunteers in IEEE working groups are not necessarily members of the Institute and participate
without compensation from IEEE. While IEEE administers the process and establishes rules to promote
fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the
accuracy of any of the information or the soundness of any judgments contained in its standards.
IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure
against interference with or from other devices or networks. Implementers and users of IEEE Standards
documents are responsible for determining and complying with all appropriate safety, security,
environmental, health, and interference protection practices and all applicable laws and regulations.
IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and
expressly disclaims all warranties (express, implied and statutory) not included in this or any other
document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness
for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness
of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort.
IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”
Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there
are no other ways to produce, test, measure, purchase, market, or provide other goods and services related
to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved
and issued is subject to change brought about through developments in the state of the art and comments
received from users of the standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or other
services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any
other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his
or her own independent judgment in the exercise of reasonable care in any given circumstances or, as
appropriate, seek the advice of a competent professional in determining the appropriateness of a given
IEEE standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO:
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE
UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND
REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.

3
Copyright © 2020 IEEE. All rights reserved.

---------------------- Page: 6 ----------------------
ISO/IEEE 11073-10407:2022(E)

Translations
The IEEE consensus development process involves the review of documents in English only. In the event
that an IEEE standard is translated, only the English version published by IEEE should be considered the
approved IEEE standard.
Official statements
A statement, written or oral, that is not processed in accordance with the IEEE SA Standards Board
Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its
committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures,
symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall
make it clear that his or her views should be considered the personal views of that individual rather than the
formal position of IEEE.
Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of
membership affiliation with IEEE. However, IEEE does not provide consulting information or advice
pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a
proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a
consensus of concerned interests, it is important that any responses to comments and questions also receive
the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and
Standards Coordinating Committees are not able to provide an instant response to comments or questions
except in those cases where the matter has previously been addressed. For the same reason, IEEE does not
respond to interpretation requests. Any person who would like to participate in revisions to an IEEE
standard is welcome to join the relevant IEEE working group.
Comments on standards should be submitted to the following address:
Secretary, IEEE SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854 USA
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with
the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory
requirements. Implementers of the standard are responsible for observing or referring to the applicable
regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not
in compliance with applicable laws, and these documents may not be construed as doing so.
Copyrights
IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws.
They are made available by IEEE and are adopted for a wide variety of both public and private uses. These
include both use, by reference, in laws and regulations, and use in private self-regulation, standardization,
and the promotion of engineering practices and methods. By making these documents available for use and
adoption by public authorities and private users, IEEE does not waive any rights in copyright to the
documents.

4
Copyright © 2020 IEEE. All rights reserved.

---------------------- Page: 7 ----------------------
ISO/IEEE 11073-10407:2022(E)

Photocopies
Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to
photocopy portions of any individual standard for company or organizational internal use or individual,
non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance
Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission
to photocopy portions of any individual standard for educational classroom use can also be obtained
through the Copyright Clearance Center.
Updating of IEEE Standards documents
Users of IEEE Standards documents should be aware that these documents may be superseded at any time
by the issuance of new editions or may be amended from time to time through the issuance of amendments,
corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the
document together with any amendments, corrigenda, or errata then in effect.
Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years
old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of
some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that
they have the latest edition of any IEEE standard.
In order to determine whether a given document is the current edition and whether it has been amended
through the issuance of amendments, corrigenda, or errata, visit IEEE Xplore at https://ieeexplore.ieee.org/
or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEE’s
standards development process, visit the IEEE SA Website at https://standards.ieee.org.
Errata
Errata, if any, for IEEE standards can be accessed via https://standards.ieee.org/standard/index.html. Search
for standard number and year of approval to access the web page of the published standard. Errata links are
located under the Additional Resources Details section. Errata are also available in IEEE Xplore:
https://ieeexplore.ieee.org/browse/standards/collection/ieee/. Users are encouraged to periodically check for
errata.
Patents
Attention is called to the possibility that implementation of this standard may require use of subject matter
covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to
the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant
has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the
IEEE SA Website at https://standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may
indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without
compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of
any unfair discrimination to applicants desiring to obtain such licenses.
Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not
responsible for identifying Essential Patent Claims for which a license may be required, for conducting
inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or
conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing
agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that
determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely
their own responsibility. Further information may be obtained from the IEEE Standards Association.

5
Copyright © 2020 IEEE. All rights reserved.

---------------------- Page: 8 ----------------------
ISO/IEEE 11073-10407:2022(E)

Participants
At the time this IEEE standard was completed, the Personal Health Device Working Group had the
following membership:
Daidi Zhong, Co-Chair
Michael J. Kirwan, Co-Chair

Karsten Aalders Cory Condek Robert Hall
Charles R. Abbruscato Todd H. Cooper Shu Han
Nabil Abujbara David Cornejo Nathaniel Hamming
Maher Abuzaid Douglas Coup Rickey L. Hampton
James Agnew Nigel Cox Sten Hanke
Manfred Aigner Hans Crommenacker Aki Harma
Jorge Alberola Tomio Crosley Jordan Hartmann
David Aparisi Allen Curtis Kai Hassing
Lawrence Arne Jesús Daniel Trigo Wolfgang Heck
Diego B. Arquillo David Davenport Nathaniel Heintzman
Serafin Arroyo Russell Davis Charles Henderson
Muhammad Asim Sushil K. Deka Jun-Ho Her
Kit August Ciro de la Vega Helen B. Hernandez
Doug Baird Pedro de-las-Heras-Quiros Timothy L. Hirou
David Baker Allen Hobbs
Jim Dello Stritto
Anindya Bakshi
Kent Dicks Alex Holland
Ananth Balasubramanian Hyoungho Do Arto Holopainen
Sunlee Bang Jonathan Dougherty Kris Holtzclaw
M. Jonathan Barkley Xiaolian Duan Xinyi Hong
Gilberto Barrón Sourav Dutta Robert Hoy
David Bean Jakob Ehrensvard Di Hu
John Bell Fredrik Einberg Anne Huang
Olivia Bellamou-Huet Javier Escayola Calvo Ron Huby
Rudy Belliardi Mark Estes David Hughes
Daniel Bernstein Leonardo Estevez Robert D. Hughes
George A. Bertos Bosco T. Fernandes Jiyoung Huh
Chris Biernacki Christoph Fischer Hugh Hunter
Ola Björsne Morten Flintrup Philip O. Isaacson
Thomas Blackadar Joseph W. Forler Atsushi Ito
Thomas Bluethner Russell Foster Michael Jaffe
Douglas P. Bogia Eric Freudenthal Praduman Jain
Xavier Boniface Matthias Frohner
Hu Jin
Ken Fuchs
Shannon Boucousis Danny Jochelson
Jing Gao
Julius Broma Akiyoshi Kabe
Lyle G. Bullock, Jr. Marcus Garbe Steve Kahle
Bernard Burg John Garguilo Tomio Kamioka
Chris Burns Rick Geimer James J. Kang
Jeremy Byford-Rew Igor Gejdos Kei Kariya
Satya Calloji Ferenc Gerbovics Andy Kaschl
Carole C. Carey Alan Godfrey Junzo Kashihara
Craig Carlson Nicolae Goga Colin Kennedy
Santiago Carot-Nemesio Julian Goldman Ralph Kent
Randy W. Carroll Raul Gonzalez Gomez Laurie M. Kermes
Seungchul Chae Chris Gough Ahmad Kheirandish
Peggy Chien Channa Gowda Junhyung Kim
David Chiu Charles M. Gropper Minho Kim
Jinyong Choi Amit Gupta Min-Joon Kim
Chia-Chin Chong Jeff Guttmacher Taekon Kim
Rasmus Haahr
Saeed A. Choudhary Tetsuya Kimura
Christian Habermann
Jinhan Chung Alfred Kloos
John A. Cogan Michael Hagerty Jeongmee Koh
John T. Collins Jerry Hahn Jean-Marc Koller

6
Copyright © 2020 IEEE. All rights reserved.

---------------------- Page: 9 ----------------------
ISO/IEEE 11073-10407:2022(E)

John Koon BegonyaOtal Nicholas Steblay
Patty Krantz Lars Steubesand
Marco Paleari
Raymond Krasinski John (Ivo) Stivoric
Bud Panjwani
Alexander Kraus Carl Pantiskas Raymond A. Strickland
Ramesh Krishna Harry P. Pappas Chandrasekaran Subramaniam
Geoffrey Kruse Hanna Park Hermanni Suominen
Falko Kuester Jong-Tae Park Lee Surprenant
Rafael Lajara Myungeun Park Ravi Swami
Pierre Landau Soojun Park Ray Sweidan
Jaechul Lee Phillip E. Pash Na Tang
Jong-Muk Lee Tong-Bi Pei Haruyuyki Tatsumi
Kyong Ho Lee Soren Petersen Isabel Tejero
Rami Lee James Petisce Tom Thompson
Sungkee Lee Peter Piction Jonas Tirén
Woojae Lee Michael Pliskin Janet Traub
Qiong Li Varshney Prabodh Gary Tschautscher
Xiangchen Li Jeff Price Masato Tsuchid
Yingsong Li Ken Tubman
Harald Prinzhorn
Zhuofang Li Akib Uddin
Harry Qiu
Patrick Lichter
Tanzilur Rahman Sunil Unadkat
Lin Lin Phillip Raymond Fabio Urbani
Jisoon Lim Terrie Reed Philipp Urbauer
Joon-Ho Lim Barry Reinhold Laura Vanzago
Liang Liu Brian Reinhold Alpo Värri
Xiaoming Liu Melvin I. Reynolds Andrei Vasilateanu
Wei-Jung Lo John G. Rhoads Dalimar Velez
Charles Lowe Jeffrey S. Robbins Martha Velezis
Don Ludolph Chris Roberts Rudi Voon
Christian Luszick Moskowitz Robert Barry Vornbrock
Bob MacWilliams Stefan Robert Isobel Walker
Srikkanth Madhurbootheswaran Scott M. Robertson David Wang
Miriam L. Makhlouf Timothy Robertson Linling Wang
Romain Marmot David Rosales Jerry P. Wang
Sandra Martinez Yao Wang
Bill Saltzstein
Miguel Martínez de Espronceda Giovanna Sannino Yi Wang
Cámara Jose A. Santos-Cadenas
Steve Warren
Stefan Sauermann
Peter Mayhew Fujio Watanabe
John Sawyer
Jim McCain Toru Watsuji
László Meleg AloisSchloegl Kathleen Wible
Alexander Mense Paul S. Schluter Paul Williamson
Behnaz Minaei Mark G. Schnell Jan Wittenber
Jinsei Miyazaki Richard A. Schrenker Jia-Rong Wu
Erik Moll Antonio Scorpiniti Will Wykeham
Darr Moore KwangSeok Seo Ariton Xhafa
Chris Morel Riccardo Serafin Ricky Yang
Carsten Mueglitz Sid Shaw Melanie S. Yeung
Soundharya Nagasubramanian Frank Shen Qiang Yin
Alex Neefus Min Shih Done-Sik Yoo
Trong-Nghia Nguyen-Dobinsky Mazen Shihabi Zhi Yu
Michael E. Nidd Redmond Shouldice Jianchao Zeng
Jim Niswander Sternly K. Simon Jason Zhang
Hiroaki Niwamoto Marjorie Skubic
Jie Zhao
Robert Smith
Thomas Norgall Thomas Zhao
Ivan Soh
Yoshiteru Nozoe Yuanhong Zhong
Motoki Sone
Abraham Ofek Miha Zoubek
Brett Olive Emily Sopensky Szymon Zyskoter
Rajagopalan Srinivasan


7
Copyright © 2020 IEEE. All rights reserved.

---------------------- Page: 10 ----------------------
ISO/IEEE 11073-10407:2022(E)

The following members of the individual Standards Association balloting group voted on this standard.
Balloters may have voted for approval, disapproval, or abstention.
Robert Aiello Werner Hoelzl Iulian Profir
Bjoern Andersen Noriyuki Ikeuchi
Beth Pumo
Lyle G. Bullock, Jr. Atsushi Ito Stefan Schlichting
Keith Chow Raj Jain Janek Schumann
Malcolm Clarke Piotr Karocki Walter Struppler
David Fuschi Raymond Krasinski Oren Yuen
Randall Groves H. Moll Janusz Zalewski
Nathaniel Hamming Daidi Zhong

When the IEEE SA Standards Board approved this standard on 30 January 2020, it had the following
membership:
Gary Hoffman, Chair
Vacant Position, Vice Chair
Jean-Philippe Faure, Past Chair
Konstantinos Karachalios, Secretary
Ted Burse Howard Li Dorothy Stanley
J. Travis Griffith Dong Liu Mehmet Ulema
Grace Gu Kevin Lu Lei Wang
Guido R. Hiertz Paul Nikolich Sha Wei
Joseph L. Koepfinger* Damir Novosel Philip B. Winston
John D. Kulick Jon Walter Rosdahl Daidi Zhong
David J. Law Jingyi Zhou
*Member Emeritus


8
Copyright © 2020 IEEE. All rights reserved.

---------------------- Page: 11 ----------------------
ISO/IEEE 11073-10407:2022(E)

Introduction
This introduction is not part of IEEE Std 11073-10407-2020, Health informatics—Personal health device
communication—Part 10407: Device specialization—Blood pressure monitor.
ISO/IEEE 11073 standards enable communication between medical devices and external computer systems.
This document uses the optimized framework created in IEEE Std 11073-20601™-2019 and describes a
a
specific, interoperable communication approach for blood pressure monitors. These standards align with
and draw on the existing clinically focused standards to provide support for communication of data from
personal health devices.


a
Information on references can be found in Clause 2.

9
Copyright © 2020 IEEE. All rights reserved.

---------------------- Page: 12 ----------------------
ISO/IEEE 11073-10407:2022(E)

Contents
1. Overview .12
1.1 Scope .12
1.2 Purpose .12
1.3 Word usage .12
1.4 Context .13
2. Normative references .13
3. Definitions, acronyms, and abbreviations .14
3.1 Definitions .14
3.2 Acronyms and abbreviations .15
4. Introduction to ISO/IEEE 11073 personal health devices .15
4.1 General .15
4.2 Introduction to IEEE 11073-20601 modeling constructs .16
4.3 Compliance with other standards .17
5. Blood pressure monitor device concepts and modalities .17
5.1 General .17
5.2 Systolic and diastolic pressure .18
5.3 Mean arterial pressure.
...

PROJET
NORME ISO/IEEE
FINAL
INTERNATIONALE FDIS
11073-10407
ISO/TC 215
Informatique de santé —
Secrétariat: ANSI
Interopérabilité des dispositifs —
Début de vote:
2022-06-16
Partie 10407:
Vote clos le:
Communication entre dispositifs de
2022-11-03
santé personnels — Spécialisation des
dispositifs — Moniteur de pression
sanguine
Health informatics — Device interoperability —
Part 10407: Personal health device communication — Device
specialization — Blood pressure monitor
Le présent document est distribué tel qu’il est parvenu du secrétariat du comité.
FAST TRACK PROCEDURE
TRAITEMENT PARALLÈLE ISO/CEN
LES DESTINATAIRES DU PRÉSENT PROJET SONT
INVITÉS À PRÉSENTER, AVEC LEURS OBSER-
VATIONS, NOTIFICATION DES DROITS DE PRO-
PRIÉTÉ DONT ILS AURAIENT ÉVENTUELLEMENT
CONNAISSANCE ET À FOURNIR UNE DOCUMEN-
TATION EXPLICATIVE.
OUTRE LE FAIT D’ÊTRE EXAMINÉS POUR
ÉTABLIR S’ILS SONT ACCEPTABLES À DES FINS
INDUSTRIELLES, TECHNOLOGIQUES ET COM-
Numéro de référence
MERCIALES, AINSI QUE DU POINT DE VUE
ISO/IEEE FDIS 11073-10407:2022(F)
DES UTILISATEURS, LES PROJETS DE NORMES
INTERNATIONALES DOIVENT PARFOIS ÊTRE
CONSIDÉRÉS DU POINT DE VUE DE LEUR POSSI-
BILITÉ DE DEVENIR DES NORMES POUVANT
SERVIR DE RÉFÉRENCE DANS LA RÉGLEMENTA-
TION NATIONALE. © IEEE 2022

---------------------- Page: 1 ----------------------
ISO/IEEE FDIS 11073-10407:2022(F)
PROJET
NORME ISO/IEEE
FINAL
INTERNATIONALE FDIS
11073-10407
ISO/TC 215
Informatique de santé —
Secrétariat: ANSI
Interopérabilité des dispositifs —
Début de vote:
2022-06-16
Partie 10407:
Vote clos le:
Communication entre dispositifs de
2022-11-03
santé personnels — Spécialisation des
dispositifs — Moniteur de pression
sanguine
Health informatics — Device interoperability —
Part 10407: Personal health device communication — Device
specialization — Blood pressure monitor
Le présent document est distribué tel qu’il est parvenu du secrétariat du comité.
FAST TRACK PROCEDURE
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© IEEE 2022
TRAITEMENT PARALLÈLE ISO/CEN
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y
LES DESTINATAIRES DU PRÉSENT PROJET SONT
compris la photocopie, ou la diffusion sur l’internet ou un intranet, sans autorisation écrite préalable. Une autorisation peut être
INVITÉS À PRÉSENTER, AVEC LEURS OBSER-
VATIONS, NOTIFICATION DES DROITS DE PRO-
demandée à l’IEEE à l’adresse ci-après.
PRIÉTÉ DONT ILS AURAIENT ÉVENTUELLEMENT
Institute of Electrical and Electronics Engineers, Inc
CONNAISSANCE ET À FOURNIR UNE DOCUMEN-
TATION EXPLICATIVE.
3 Park Avenue, New York
NY 10016-5997, USA OUTRE LE FAIT D’ÊTRE EXAMINÉS POUR
ÉTABLIR S’ILS SONT ACCEPTABLES À DES FINS
INDUSTRIELLES, TECHNOLOGIQUES ET COM-
Numéro de référence
E-mail: stds.ipr@ieee.org
MERCIALES, AINSI QUE DU POINT DE VUE
ISO/IEEE FDIS 11073-10407:2022(F)
Website: www.ieee.org
DES UTILISATEURS, LES PROJETS DE NORMES
INTERNATIONALES DOIVENT PARFOIS ÊTRE
Publié en Suisse
CONSIDÉRÉS DU POINT DE VUE DE LEUR POSSI-
BILITÉ DE DEVENIR DES NORMES POUVANT
SERVIR DE RÉFÉRENCE DANS LA RÉGLEMENTA-
ii
  © IEEE 2022 – Tous droits réservés
TION NATIONALE. © IEEE 2020

---------------------- Page: 2 ----------------------
ISO/IEEE 11073-10407:2022(F)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes
nationaux de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est
en général confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude a le
droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l’ISO participent également aux travaux.
L’ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier de prendre note des
différents critères d’approbation requis pour les différents types de documents ISO
(voir www.iso.org/directives).
Les documents normatifs de l’IEEE sont élaborés au sein des sociétés de l’IEEE et des Comités de
Coordination des Normes du Conseil des Normes de l’Association des normes IEEE (IEEE-SA). L’IEEE
élabore ses normes par le biais d’un processus de développement de consensus approuvé par
l’American National Standards Institute, qui rassemble des volontaires représentant divers points de
vue et divers intérêts pour parvenir au produit final. Les volontaires ne sont pas nécessairement des
membres de l’Institut et aucune compensation ne leur est attribuée. Bien que l’IEEE administre le
processus et établisse des règles pour favoriser l’équité au cours du processus de développement du
consensus, l’IEEE n’évalue pas, ne soumet pas à essai ou ne vérifie pas de manière indépendante
l’exactitude des informations contenues dans ses normes.
L’attention est attirée sur le fait que certains des éléments du présent document peuvent faire l’objet de
droits de propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de brevets. Les détails concernant les références aux droits de
propriété intellectuelle ou autres droits analogues identifiés lors de l’élaboration du document sont
indiqués dans l’Introduction et/ou dans la liste des déclarations de brevets reçues par l’ISO (voir
www.iso.org/brevets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un
engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l’ISO liés à l’évaluation de la conformité, ou pour toute information au sujet de l’adhésion
de l’ISO aux principes de l’Organisation mondiale du commerce (OMC) concernant les obstacles
techniques au commerce (OTC), voir le lien suivant : www.iso.org/iso/fr/avant-propos.
L’ISO/IEEE 11073-10407 a été élaborée par le Comité des normes IEEE 11073 de la Société d’Ingénierie
en Médecine et Biologie de l’IEEE (en tant que norme IEEE 11073-10407-2020) et rédigée
conformément à ses règles de rédaction. Elle a été adoptée par le comité technique ISO/TC 215,
Informatique de santé, dans le cadre de la « procédure rapide » définie par l’accord de coopération entre
les Organisations Partenaires de Développement de Normes que sont l’ISO et l’IEEE.
Cette deuxième édition annule et remplace la première édition (ISO/IEEE 11073-10407:2010), qui a
fait l’objet d’une révision technique.
Une liste de toutes les parties de la série ISO/IEEE 11073 se trouve sur le site Web de l’ISO.
Il convient que l’utilisateur adresse tout retour d’information ou toute question concernant le présent
document à l’organisme national de normalisation de son pays. Une liste exhaustive desdits organismes
se trouve à l’adresse www.iso.org/fr/members.html.
© IEEE 2020 – Tous droits réservés
iii

---------------------- Page: 3 ----------------------
IEEE Std 11073-10407™-2020
(Révision de la norme IEEE 11073-10407-2005)


Informatique de santé — Communication entre dispositifs de santé
personnels
Partie 10407 : Communication entre
dispositifs de santé personnels —
Spécialisation des dispositifs — Moniteur de
pression sanguine
Élaborée par le

IEEE 11073™ Standards Committee
de la
Société d’Ingénierie en Médecine et Biologie de l’IEEE


Approuvée le 30 janvier 2020

Conseil des Normes IEEE SA

---------------------- Page: 4 ----------------------
ISO/IEEE 11073-10407:2022(F)
ISO/IEEE FDIS 11073-10407:2022(F)
Résumé : Dans le contexte de la famille de normes ISO/IEEE 11073 relatives à la communication entre des
dispositifs, la présente norme établit une définition normative de la communication entre des dispositifs de
moniteurs de pression artérielle personnels de télésanté et des moteurs informatiques (par exemple des
téléphones cellulaires, des ordinateurs personnels, des équipements personnels de santé et des boîtiers
décodeurs) d’une manière qui permet une interopérabilité de type prêt à l’emploi. Elle s’appuie sur les parties
appropriées de normes existantes, y compris la terminologie, des modèles d’informations, des normes de profils
d’applications et des normes de transport de l’ISO/IEEE 11073. Elle spécifie l’utilisation de codes, de formats et de
comportements en termes spécifiques dans les environnements de télésanté, en limitant les choix à des cadres de
travail de base en faveur de l’interopérabilité. La présente norme définit un noyau commun de fonctionnalités de
communication pour les moniteurs de pression sanguine personnels de télésanté.
Mots-clés : moniteur de pression artérielle, IEEE 11073-10407™, communication entre dispositifs médicaux,
dispositifs de santé personnels

The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, États-Unis
Copyright © 2020 — Institute of Electrical and Electronics Engineers, Inc.
Tous droits réservés. Publié le 30 avril 2020. Imprimé aux États-Unis.
IEEE est une marque commerciale déposée à l’Office des brevets et des marques des États-Unis, détenue par l’Institute of Electrical and Electronics Engineers,
Incorporated.
PDF : ISBN 978-1-5044-6460-4 STD24062
Copie papier : ISBN 978-1-5044-6461-1 STDPD24062
L’IEEE interdit toute discrimination, tout harcèlement et toute intimidation.
Pour plus d’informations, consulter https://www.ieee.org/about/corporate/governance/p9-26.html.
Toute reproduction, même partielle, de cette publication, sous quelque forme et par quelque procédé que ce soit, y compris par système de localisation électronique, est
interdite sans l’autorisation écrite préalable de l’éditeur.

---------------------- Page: 5 ----------------------
ISO/IEEE 11073-10407:2022(F)
ISO/IEEE FDIS 11073-10407:2022(F)
Notes importantes et rejets de responsabilité concernant les documents normatifs de
l’IEEE
Les documents de l’IEEE sont mis à disposition pour utilisation sous réserve de notes importantes et de rejets de
responsabilité légale. Ces notes et rejets de responsabilité, ou une référence à cette page, apparaissent dans toutes
les normes et peuvent être trouvés sous l’en-tête « Notes importantes et rejets de responsabilité concernant les
documents normatifs de l’IEEE ». Ils peuvent également être obtenus sur demande auprès de l’IEEE ou visualisés
sur le site : https://standards.ieee.org/ipr/disclaimers.html.
Note et rejet de responsabilité concernant l’utilisation des documents normatifs de l’IEEE
Les documents normatifs de l’IEEE (normes, usages recommandés et guides), à la fois pour une utilisation pleine
et un essai d’utilisation, sont développés au sein des sociétés de l’IEEE et des Comités de Coordination des Normes
du Conseil des Normes de l’Association des normes IEEE (IEEE-SA). L’IEEE (« l’Institut ») élabore ses normes par
le biais d’un processus de développement de consensus approuvé par l’American National Standards Institute
(« ANSI »), qui rassemble des volontaires représentant divers points de vue et divers intérêts pour parvenir au
produit final. Les normes de l’IEEE sont des documents élaborés par des groupes de travail scientifiques,
universitaires et techniques (issus du secteur industriel). Les volontaires collaborant aux groupes de travail de
l’IEEE ne sont pas nécessairement des membres de l’Institut et aucune compensation ne leur est attribuée pour
leur participation. Bien que l’IEEE administre le processus et établisse des règles pour favoriser l’équité au cours
du processus de développement du consensus, l’IEEE n’évalue pas, ne soumet pas à essai ou ne vérifie pas de
manière indépendante l’exactitude des informations ni le bien-fondé de tous les jugements contenus dans ses
normes.
Les normes de l’IEEE ne fournissent ni garantie, ni assurance quant à la sûreté, la sécurité, la santé ou la protection
environnementale, et n’assurent pas de protection contre les interférences avec d’autres dispositifs ou réseaux ou
provenant de ceux-ci. Les personnes qui mettent en œuvre et celles qui utilisent les documents normatifs de l’IEEE
sont responsables de la détermination appropriée de la sûreté, de la sécurité, des pratiques environnementales,
sanitaires et de protection contre les interférences et de toutes les lois et réglementations applicables ainsi que de
la conformité à celles-ci.
L’IEEE ne garantit ni ne représente l’exactitude ou le contenu des informations contenues dans ses normes,
et décline expressément toute garantie (explicite, implicite et statutaire) non incluse dans le présent document ou
tout autre document en rapport avec la norme, y compris, sans toutefois s’y limiter, les garanties d’aptitude à la
commercialisation, d’adéquation à un usage particulier, de non-contrefaçon, ainsi que de qualité, précision,
efficacité, actualité ou intégrité des informations. De plus, l’IEEE renonce à toutes les conditions relatives aux
résultats et aux efforts professionnels. Les documents normatifs de l’IEEE sont fournis « EN L’ÉTAT » et
« AVEC TOUS LES DÉFAUTS ».
L’utilisation d’une norme IEEE est totalement volontaire. L’existence d’une norme IEEE n’implique pas qu’il n’y ait
pas d’autres manières de produire, de soumettre à essai, de mesurer, d’acheter, de commercialiser ou de fournir
d’autres biens et services qui se rapportent au domaine d’application de la norme IEEE. En outre, le point de vue
exprimé à l’instant où une norme est approuvée et publiée est soumis aux changements provoqués par les
développements dans l’état de la technique et les commentaires reçus des utilisateurs de la norme.
En publiant ses normes et en les rendant disponibles, l’IEEE ne suggère pas ou ne rend pas de services
professionnels ou autres pour une personne ou une entité quelconque, et n’entreprend pas non plus l’exécution
d’une responsabilité quelconque de toute autre personne ou entité envers une autre. Il est recommandé à toute
personne utilisant un document normatif de l’IEEE de s’appuyer sur son jugement indépendant en exerçant une
diligence raisonnable dans des circonstances données quelconques ou, selon le cas, de demander l’avis d’un
professionnel compétent pour déterminer la pertinence d’une norme IEEE donnée.
3
Copyright © 2020 IEEE. Tous droits réservés.

---------------------- Page: 6 ----------------------
ISO/IEEE 11073-10407:2022(F)
ISO/IEEE FDIS 11073-10407:2022(F)


EN AUCUN CAS L’IEEE NE SAURAIT ÊTRE TENUE POUR RESPONSABLE DE QUELCONQUES DOMMAGES DIRECTS,
INDIRECTS, INCIDENTS, SPÉCIAUX, EXEMPLAIRES OU CONSÉCUTIFS (Y COMPRIS, SANS TOUTEFOIS S’Y

LIMITER : ACHATS DE MARCHANDISES OU SERVICES DE REMPLACEMENT ; PERTE D’UTILISATION,
DE DONNÉES OU DE BÉNÉFICES ; OU INTERRUPTION D’ACTIVITÉ) CAUSÉS DE QUELQUE MANIÈRE QUE CE SOIT
ET SELON TOUTE THÉORIE DE RESPONSABILITÉ, QUE CE SOIT DANS LE CONTRAT, RESPONSABILITÉ STRICTE
OU DÉLICTUELLE (Y COMPRIS LA NÉGLIGENCE OU AUTRE), RÉSULTANT DE LA PUBLICATION, DE
L’UTILISATION OU DE LA CONFIANCE DE/EN TOUTE NORME, MÊME EN CAS D’INFORMATION DE LA
POSSIBILITÉ DE TELS DOMMAGES, ET INDÉPENDAMMENT DU FAIT QUE CES DOMMAGES ÉTAIENT
PRÉVISIBLES OU NON.
Traductions
Le processus de développement du consensus de l’IEEE implique l’examen de documents en anglais uniquement.
Si une norme de l’IEEE est traduite, il convient que seule la version anglaise publiée par l’IEEE soit considérée
comme la norme IEEE approuvée.
Déclarations officielles
Une déclaration, écrite ou orale, qui n’est pas traitée conformément au manuel des opérations du Conseil des
Normes IEEE-SA ne doit pas être considérée ou supposée être la position officielle de l’IEEE ou de l’un de ses
comités et ne doit pas être considérée comme une position officielle de l’IEEE, ni servir de base à une telle position.
Lors de conférences, de symposiums, de séminaires ou de cours de formation, une personne présentant des
informations sur les normes de l’IEEE doit indiquer clairement qu’il convient que ses points de vue soient
considérés comme les points de vue personnels de cette personne plutôt que comme la position officielle de l’IEEE.
Commentaires relatifs aux normes
Les commentaires visant à des révisions des documents normatifs de l’IEEE provenant de toute partie intéressée
sont les bienvenus, indépendamment de l’affiliation en tant que membre de l’IEEE. Toutefois, l’IEEE ne fournit pas
d’informations de consulting ou de conseils relatifs aux documents normatifs de l’IEEE. Il convient que des
suggestions pour des modifications aux documents se présentent sous la forme d’une modification de texte
proposée accompagnée des commentaires d’appui appropriés. Comme les normes de l’IEEE représentent un
consensus des intérêts concernés, il est important que toutes les réponses aux commentaires et aux questions
aient également reçu l’attention d’intérêts équilibrés. Pour cette raison, l’IEEE et les membres de ses sociétés et de
ses Comités de Coordination des Normes ne peuvent pas fournir une réponse instantanée aux commentaires ou
questions, excepté dans les cas où le sujet a précédemment été traité. Pour la même raison, l’IEEE ne répond pas
aux demandes d’interprétation. Toute personne désirant participer aux révisions d’une norme IEEE est invitée à
rejoindre le groupe de travail IEEE concerné.
Il convient d’adresser les commentaires sur les normes à :
Secretary, IEEE SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854 USA
Lois et règlements
Il est recommandé aux utilisateurs des documents normatifs de l’IEEE de consulter toutes les lois et
réglementations applicables. La conformité aux dispositions de tout document normatif de l’IEEE n’implique pas
la conformité à toutes les exigences réglementaires applicables. Il incombe aux personnes ou organismes mettant
en œuvre la norme d’observer les exigences réglementaires applicables ou d’y faire référence. L’IEEE n’a pas
l’intention, du fait de la publication de ses normes, de provoquer des actions qui ne sont pas conformes aux lois
applicables et ces documents ne peuvent pas être interprétés comme le faisant.
4
Copyright © 2020 IEEE. Tous droits réservés.

---------------------- Page: 7 ----------------------
ISO/IEEE 11073-10407:2022(F)
ISO/IEEE FDIS 11073-10407:2022(F)


Copyrights

Les projets de norme et normes approuvées de l’IEEE sont propriétés intellectuelles de l’IEEE en vertu des lois
américaines et internationales sur les droits d’auteur. Ils sont rendus disponibles par l’IEEE et sont adoptés pour
une grande diversité d’utilisations à la fois publiques et privées. Celles-ci incluent une utilisation, par référence,
dans les lois et réglementations et une utilisation dans l’auto-réglementation, la normalisation et la promotion de
pratiques et de méthodes d’ingénierie. En rendant ces documents disponibles en vue de leur utilisation et de leur
adoption par les autorités publiques et les utilisateurs privés, l’IEEE ne renonce à aucun droit de copyright sur ce
document.
Photocopies
Sous réserve du paiement des droits correspondants, l’IEEE accordera aux utilisateurs une licence limitée et non
exclusive pour photocopier des parties de toute norme individuelle en vue d’une utilisation interne par
l’entreprise ou l’organisation ou une utilisation exclusivement individuelle et non commerciale. Pour les
dispositions relatives au versement du droit de licence, contacter le Copyright Clearance Center, Customer Service,
222 Rosewood Drive, Danvers, MA 01923 États-Unis ; Tél. +1 978 750 8400. L’autorisation de photocopier des
parties d’une norme individuelle à des fins éducatives en classe peut également être obtenue auprès du Copyright
Clearance Center.
Mise à jour de documents normatifs de l’IEEE
Il convient que les utilisateurs des documents normatifs de l’IEEE soient informés du fait que ces documents
peuvent être remplacés à tout moment par la publication de nouvelles éditions ou peuvent être amendés de temps
à autre par le biais de la publication d’amendements, de correctifs ou d’errata. Un document IEEE officiel, à un
instant quelconque, est constitué de l’édition actuelle du document accompagnée de tous les amendements,
correctifs ou errata alors en vigueur.
Chaque norme IEEE est soumise à un examen au moins tous les 10 ans. Lorsqu’un document a plus de 10 ans et
n’a pas été soumis à un processus d’examen, il est raisonnable de conclure que son contenu, bien qu’il ait encore
une certaine valeur, ne reflète pas totalement l’état actuel de la technique. Les utilisateurs sont invités à s’assurer
qu’ils ont la dernière édition des normes IEEE.
Pour déterminer si un document donné est l’édition actuelle et s’il a été amendé par le biais de la publication
d’amendements, de correctifs ou d’errata, il convient de visiter le site IEEE Xplore à l’adresse
https://ieeexplore.ieee.org/ ou de contacter l’IEEE à l’adresse citée précédemment. Pour de plus amples
informations sur l’IEEE SA ou le processus de développement des normes IEEE, visiter le site Web de l’IEEE SA à
l’adresse https://standards.ieee.org.
Errata
Les éventuels errata pour les normes de l’IEEE sont accessibles à l’adresse
lhttps://standards.ieee.org/standard/index.html. Rechercher le numéro de la norme et l’année d’approbation
pour accéder à la page Web de la norme publiée. Les liens vers les errata se trouvent dans la section Détails des
ressources supplémentaires. Les errata sont également disponibles dans IEEE Xplore :
https://ieeexplore.ieee.org/browse/standards/collection/ieee/. Les utilisateurs sont encouragés à vérifier
périodiquement les errata.
5
Copyright © 2020 IEEE. Tous droits réservés.

---------------------- Page: 8 ----------------------
ISO/IEEE 11073-10407:2022(F)
ISO/IEEE FDIS 11073-10407:2022(F)


Brevets

L’attention est appelée sur la possibilité que la mise en œuvre de la présente norme puisse requérir l’utilisation
d’un objet couvert par des droits de propriété intellectuelle ou des droits analogues. Du fait de la publication de la
présente norme, aucune position n’est adoptée en ce qui concerne l’existence ou la validité de quelconques droits
de brevet en rapport avec celle-ci. Si le détenteur d’un brevet ou le demandeur d’un brevet a déposé une
déclaration d’assurance par l’intermédiaire d’une lettre d’assurance acceptée, la déclaration est alors répertoriée
sur le site Web de l’IEEE-SA https://standards.ieee.org/about/sasb/patcom/patents.html. Les lettres d’assurance
peuvent indiquer si le déposant accepte ou non d’accorder des licences dans le cadre de ces droits sans
compensation ou avec des redevances raisonnables, avec des termes et conditions raisonnables dont il peut être
démontré qu’ils sont exempts de toute discrimination inéquitable pour les demandeurs désirant obtenir de telles
licences.
D’autres revendications essentielles de brevets peuvent exister, pour lesquelles une lettre d’assurance n’a pas été
reçue. Il n’incombe pas à l’IEEE d’identifier les Essential Patent Claims (Revendications Essentielles de Brevets)
pour lesquelles une licence peut être requise, d’exécuter des enquêtes portant sur la validité légale ou la portée
des revendications de brevet ou de déterminer si des termes ou conditions d’attribution de licence fournis en
rapport avec la soumission d’une lettre d’assurance, le cas échéant, ou dans des accords d’attribution de licence
quelconques sont raisonnables ou non discriminatoires. Les utilisateurs de la présente norme sont expressément
avisés que la détermination de la validité de tout droit de brevet et le risque de violation de ces droits leur
incombent entièrement. Des informations supplémentaires peuvent être obtenues auprès de l’Association des
normes IEEE.
6
Copyright © 2020 IEEE. Tous droits réservés.

---------------------- Page: 9 ----------------------
ISO/IEEE 11073-10407:2022(F)
ISO/IEEE FDIS 11073-10407:2022(F)



Participants
Au moment de l’achèvement de la présente norme IEEE, le Groupe de travail Dispositifs de santé personnels
comprenait les membres suivants :
Daidi Zhong, Co-président
Michael Kirwan, Co-président

Karsten Aalders Hans Crommenacker Charles Henderson
Charles R. Abbruscato Tomio Crosley Jun-Ho Her
Nabil Abujbara Allen Curtis Helen B. Hernandez
Maher Abuzaid Jesús Daniel Trigo Timothy L. Hirou
James Agnew David Davenport Allen Hobbs
Manfred Aigner Russell Davis Alex Holland
Jorge Alberola Sushil K. Deka Arto Holopainen
David Aparisi Ciro de la Vega Kris Holtzclaw
Lawrence Arne Pedro de-las-Heras-Quiros Xinyi Hong
Diego B. Arquillo Jim Dello Stritto Robert Hoy
Serafin Arroyo Kent Dicks Di Hu
Muhammad Asim Hyoungho Do Anne Huang
Kit August Jonathan Dougherty Ron Huby
Doug Baird Xiaolian Duan David Hughes
David Baker Sourav Dutta Robert D. Hughes
Anindya Bakshi Jakob Ehrensvard Jiyoung Huh
Ananth Balasubramanian Fredrik Einberg Hugh Hunter
Sunlee Bang Javier Escayola Calvo Philip O. Isaacson
M. Jonathan Barkley Mark Estes Atsushi Ito
Gilberto Barrón Leonardo Estevez Michael Jaffe
David Bean Bosco T. Fernandes Praduman Jain
John Bell Christoph Fischer Hu Jin
Olivia Bellamou-Huet Morten Flintrup Danny Jochelson
Rudy Belliardi Joseph W. Forler Akiyoshi Kabe
Daniel Bernstein Russell Foster Steve Kahle
George A. Bertos Eric Freudenthal Tomio Kamioka
Chris Biernacki Matthias Frohner James J. Kang
Ola Björsne Ken Fuchs Kei Kariya
Thomas Blackadar Jing Gao Andy Kaschl
Thomas Bluethner Marcus Garbe Junzo Kashihara
Douglas P. Bogia John Garguilo Colin Kennedy
Xavier Boniface Rick Geimer Ralph Kent
Shannon Boucousis Igor Gejdos Laurie M. Kermes
Julius Broma Ferenc Gerbovics Ahmad Kheirandish
Lyle G. Bullock, Jr. Alan Godfrey Junhyung Kim
Bernard Burg Nicolae Goga Minho Kim
Chris Burns Julian Goldman Min-Joon Kim
Jeremy Byford-Rew Raul Gonzalez Gomez Taekon Kim
Satya Calloji Chris Gough Tetsuya Kimura
Carole C. Carey Channa Gowda Alfred Kloos
Craig Carlson Charles M. Gropper Jeongmee Koh
Santiago Carot-Nemesio Amit Gupta Jean-Marc Koller
Randy W. Carroll Jeff Guttmacher John Koon
Seungchul Chae Rasmus Haahr Patty Krantz
Peggy Chien Christian Habermann Raymond Krasinski
David Chiu Michael Hagerty Alexander Kraus
Jinyong Choi Jerry Hahn Ramesh Krishna
Chia-Chin Chong Robert Hall Geoffrey Kruse
Saeed A. Choudhary Shu Han Falko Kuester
Jinhan Chung Nathaniel Hamming Rafael Lajara
John A. Cogan Rickey L. Hampton Pierre Landau
John T. Collins Sten Hanke Jaechul Lee
Cory Condek Aki Harma Jong-Muk Lee
Todd H. Cooper Jordan Hartmann Kyong Ho Lee
David Cornejo Kai Hassing Rami Lee
Douglas Coup Wolfgang Heck Sungkee Lee
Nigel Cox Nathaniel Heintzman Woojae Lee
7
Copyright © 2020 IEEE. Tous droits réservés.

---------------------- Page: 10 ----------------------
ISO/IEEE 11073-10407:2022(F)
ISO/IEEE FDIS 11073-10407:2022(F)


Qiong Li Tong-Bi Pei Hermanni Suominen
Xiangchen Li Soren Petersen Lee Surprenant

Yingsong Li James Petisce Ravi Swami
Zhuofang Li Peter Piction Ray Sweidan
Patrick Lichter Michael Pliskin Na Tang
Lin Lin Varshney Prabodh Haruyuyki Tatsumi
Jisoon Lim Jeff Price Isabel Tejero
Joon-Ho Lim Harald Prinzhorn Tom Thompson
Liang Liu Harry Qiu Jonas Tirén
Xiaoming Liu Tanzilur Rahman Janet Traub
Wei-Jung Lo Phillip Raymond Gary Tschautscher
Charles Lowe Terrie Reed Masato Tsuchid
Don Ludolph Barry Reinhold Ken Tubman
Christian Luszick Brian Reinhold Akib Uddin
Bob MacWilliams Melvin I. Reynolds Sunil Unadkat
Srikkanth Madhurbootheswaran John G. Rhoads Fabio Urbani
Miriam L. Makhlouf Jeffrey S. Robbins Philipp Urbauer
Romain Marmot Chris Roberts Laura Vanzago
Sandra Martinez Moskowitz Robert Alpo Värri
Miguel Martínez de Espronceda Stefan Robert Andrei Vasilateanu
Cámara Scott M. Robertson Dalimar Velez
Peter Mayhew Timothy Robertson Martha Velezis
Jim McCain David Rosales Rudi Voon
László Meleg Bill Saltzstein Barry Vornbrock
Alexander Mense Giovanna Sannino Isobel Walker
Behnaz Minaei Jose A. Santos-Cadenas David Wang
Jinsei Miyazaki Stefan Sauermann Linling Wang
Erik Moll John Sawyer Jerry P. Wang
Darr Moore AloisSchloegl Yao Wang
Chris Morel Paul S. Schluter Yi Wang
Carsten Mueglitz Mark G. Schnell Steve Warren
Soundharya Nagasubramanian Richard A. Schrenker Fujio Watanabe
Alex Neefus Antonio Scorpiniti Toru Watsuji
Trong-Nghia Nguyen-Dobinsky KwangSeok Seo Kathleen Wible
Michael E. Nidd Riccardo Serafin Paul Williamson
Jim Niswander Sid Shaw Jan Wittenber
Hiroaki Niwamoto Frank Shen Jia-Rong Wu
Thomas Norgall Min Shih Will Wykeham
Yoshiteru Nozoe Mazen Shihabi Ariton Xhafa
Abraham Ofek Redmond Shouldice Ricky Yang
Brett Olive Sternly K. Simon Melanie S. Yeung
Marjorie Skubic Qiang Yin
BegonyaOtal Robert Smith Done-Sik Yoo
Marco Paleari Ivan Soh Zhi Yu
Bud Panjwani Motoki Sone Jianchao Zeng
Carl Pantiskas Emily Sopensky Jason Zhang
Harry P. Pappas Rajagopalan Srinivasan Jie Zhao
Hanna Park Nicholas Steblay Thomas Zhao
Jong-Tae Park Lars Steubesand Yuanhong Zhong
Myungeun Park John (Ivo) Stivoric Miha Zoubek
Soojun Park Raymond A. Strickland Szymon Zyskoter
Phillip E. Pash Chandrasekaran Subramaniam

La présente norme a été votée par les membres suivants du comité de vote individuel de l’Association des normes.
Les votants peuvent avoir voté son approbation, sa désapprobation ou s’être abstenus.
Robert Aiello Werner Hoelzl Iulian Profir
Bjoern Andersen Noriyuki Ikeuchi Beth Pumo
Lyle G. Bullock, Jr. Atsushi Ito Stefan Schlichting
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.