ISO 12488-1:2005/Cor 1:2008
(Corrigendum)Cranes - Tolerances for wheels and travel and traversing tracks - Part 1: General - Technical Corrigendum 1
Cranes - Tolerances for wheels and travel and traversing tracks - Part 1: General - Technical Corrigendum 1
This part of ISO 12488 specifies tolerances for construction assemblies and operational conditions of cranes and associated crane tracks as defined in ISO 4306-1. The purpose of the requirements in this part of ISO 12488 is to promote safe operation and achievement of the expected life of components by the elimination of excessive load effects due to deviations or misalignments from the normal dimensions of the structure. Tolerances given are extreme values. The elastic deformations due to load effects are outside the scope of this part of ISO 12488. These will need to be taken into account at the design stage using other criteria to achieve the intended operation and performance. Specific values for particular crane types are given in other parts of ISO 12488.
Appareils de levage à charge suspendue — Tolérances des roues et des voies de roulement et de déplacement — Partie 1: Généralités — Rectificatif technique 1
Žerjavi - Tolerance za kolesa, gibanje in vozne proge - 1. del: Splošno - Popravek
Ta del standarda ISO 12488 določa tolerance za konstrukcijske sestave in obratovalne pogoje žerjavov in povezanih prog žerjavov iz standarda ISO 4306-1. Namen zahtev v tem delu standarda ISO 12488 je spodbujati varno obratovanje in doseganje pričakovane življenjske dobe sestavnih delov z odpravo učinkov prekomernih obremenitev zaradi odstopanj od normalnih mer strukture ali neporavnanosti z njimi. Navedene tolerance so skrajne vrednosti. Elastične deformacije zaradi učinkov obremenitev ne spadajo v področje uporabe tega dela standarda ISO 12488. Deformacije bo treba upoštevati v fazi načrtovanja z uporabo drugih meril, da se dosežeta nameravano obratovanje in učinkovitost. Posebne vrednosti za posamezne vrste žerjavov so navedene v drugih delih standarda ISO 12488.
General Information
Relations
Frequently Asked Questions
ISO 12488-1:2005/Cor 1:2008 is a corrigendum published by the International Organization for Standardization (ISO). Its full title is "Cranes - Tolerances for wheels and travel and traversing tracks - Part 1: General - Technical Corrigendum 1". This standard covers: This part of ISO 12488 specifies tolerances for construction assemblies and operational conditions of cranes and associated crane tracks as defined in ISO 4306-1. The purpose of the requirements in this part of ISO 12488 is to promote safe operation and achievement of the expected life of components by the elimination of excessive load effects due to deviations or misalignments from the normal dimensions of the structure. Tolerances given are extreme values. The elastic deformations due to load effects are outside the scope of this part of ISO 12488. These will need to be taken into account at the design stage using other criteria to achieve the intended operation and performance. Specific values for particular crane types are given in other parts of ISO 12488.
This part of ISO 12488 specifies tolerances for construction assemblies and operational conditions of cranes and associated crane tracks as defined in ISO 4306-1. The purpose of the requirements in this part of ISO 12488 is to promote safe operation and achievement of the expected life of components by the elimination of excessive load effects due to deviations or misalignments from the normal dimensions of the structure. Tolerances given are extreme values. The elastic deformations due to load effects are outside the scope of this part of ISO 12488. These will need to be taken into account at the design stage using other criteria to achieve the intended operation and performance. Specific values for particular crane types are given in other parts of ISO 12488.
ISO 12488-1:2005/Cor 1:2008 is classified under the following ICS (International Classification for Standards) categories: 53.020.20 - Cranes. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 12488-1:2005/Cor 1:2008 has the following relationships with other standards: It is inter standard links to ISO 12488-1:2005, ISO 12488-1:2012; is excused to ISO 12488-1:2005. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO 12488-1:2005/Cor 1:2008 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Žerjavi - Tolerance za kolesa, gibanje in vozne proge - 1. del: Splošno - PopravekAppareils de levage à charge suspendue - Tolérances des roues et des voies de roulement et de déplacement - Partie 1: GénéralitésCranes - Tolerances for wheels and travel and traversing tracks - Part 1: General53.020.20DvigalaCranesICS:Ta slovenski standard je istoveten z:ISO 12488-1:2005/Cor 1:2008SIST ISO 12488-1:2012/Cor 1:2012en01-oktober-2012SIST ISO 12488-1:2012/Cor 1:2012SLOVENSKI
STANDARD
ICS
53.020.20 Ref. No. ISO 12488-1:2005/Cor.1:2008(E)©
ISO 2008 – All rights reserved Published in Switzerland
INTERNATIONAL STANDARD ISO 12488-1:2005 TECHNICAL CORRIGENDUM 1 Published 2008-11-15 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION •
• ORGANISATION INTERNATIONALE DE NORMALISATION
Cranes — Tolerances for wheels and travel and traversing tracks —
Part 1: General TECHNICAL CORRIGENDUM 1 Appareils de levage à charge suspendue — Tolérances des roues et des voies de roulement et de déplacement —
Partie 1: Généralités RECTIFICATIF TECHNIQUE 1 Technical Corrigendum 1 to International Standard ISO 12488-1:2005 was prepared by Technical Committee ISO/TC 96, Cranes, Subcommittee SC 8, Jib cranes.
Page 2,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...