Ships and marine technology -- Pipework and machinery -- Information transfer

ISO 8277:2013 specifies the minimum data needed for the prefabrication and assembly of pipework and for its transfer from engineering departments to workshops in the shipbuilding industry. ISO 8277:2013 is applicable to written information needed for construction of piping installations that marine piping equipment manufacturers submit through specifications and instructions to shipyards on shipbuilding. ISO 8277:2013 is not applicable to the generation, type presentation and filing organization of this data.

Navires et technologie maritime -- Tuyauteries et machines -- Transmission d'informations

General Information

Status
Published
Publication Date
23-May-2013
Current Stage
6060 - International Standard published
Start Date
21-May-2013
Completion Date
24-May-2013
Ref Project

RELATIONS

Buy Standard

Standard
ISO 8277:2013 - Ships and marine technology -- Pipework and machinery -- Information transfer
English language
8 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (sample)

INTERNATIONAL ISO
STANDARD 8277
Second edition
2013-06-01
Ships and marine technology —
Pipework and machinery —
Information transfer
Navires et technologie maritime — Tuyauteries et machines —
Transmission d’informations
Reference number
ISO 8277:2013(E)
ISO 2013
---------------------- Page: 1 ----------------------
ISO 8277:2013(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2013

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form

or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior

written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of

the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 8277:2013(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

Introduction ..................................................................................................................................................................................................................................v

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Pipework information .................................................................................................................................................................................... 1

3.1 Information on standard parts .................................................................................................................................................. 1

3.2 Information on non-standard parts ...................................................................................................................................... 2

3.3 Administrative information ......................................................................................................................................................... 4

4 Flow chart .................................................................................................................................................................................................................... 6

Bibliography ................................................................................................................................................................................................................................ 8

© ISO 2013 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO 8277:2013(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received. www.iso.org/patents

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

The committee responsible for this document is ISO/TC 8, Ships and marine technology, Subcommittee

SC 3, Piping and machinery.

This second edition cancels and replaces the first edition (ISO 8277:1988), which has been technically revised.

iv © ISO 2013 – All rights reserved
---------------------- Page: 4 ----------------------
ISO 8277:2013(E)
Introduction

The revision to this International Standard takes into account the recent globalization of the shipbuilding

industry and manufacturers of installed equipment, and the transformation of specifications, which

introduce the following points into piping machinery at shipyards:

— A growing number of installed equipment and piping equipment manufacturers, and their models;

— A diversification of standards specifying piping installations and piping fittings used by shipyards

and/or ship equipment manufacturers.

With this background there is a lack of information necessary to carry out pipe fittings and machinery

in shipyards, and an absence of consistency in the descriptions of these points.

This International Standard is revised taking into consideration the current situation of piping machinery

in shipyards. In order to enable manufacturers of equipment and/or piping equipment to comply with

this International Standard which specifies procedures of drawings and manufacturing, the revision

covers the following points:

— The implementation of this International Standard for operation when applying other international

standards and/or each national standard;

— The description of as many references as possible in a requirements and comments table as

applicable requirements to the latest circumstances of pipe fitting in shipyards.

© ISO 2013 – All rights reserved v
---------------------- Page: 5 ----------------------
INTERNATIONAL STANDARD ISO 8277:2013(E)
Ships and marine technology — Pipework and
machinery — Information transfer
1 Scope

This International Standard specifies the minimum data needed for the prefabrication and assembly of

pipework and for its transfer from engineering departments to workshops in the shipbuilding industry.

It is applicable to written information needed for construction of piping installations that marine piping

equipment manufacturers submit through specifications and instructions to shipyards on shipbuilding.

It is not applicable to the generation, type presentation and filing organization of this data.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated

references, only the edition cited applies. For undated references, the latest edition of the referenced

document (including any amendments) applies.

ISO 14726:2008, Ships and marine technology — Identification colours for the content of pip

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.