iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 5209:2019

(Main)

General purpose industrial valves — Marking

General purpose industrial valves — Marking

This document specifies the requirements for the mandatory and optional markings of general purpose industrial valves. It defines the method of applying the markings, on the body, on a flange, on an identification plate or any other location. This document is considered in conjunction with the specified requirements of the valve product standards or valve performance standards. The marking requirements for plastic valves are not within the scope of this document.

Appareils de robinetterie industrielle d'usage général — Marquage

Industrijski ventili za splošno uporabo - Označevanje

Ta dokument določa zahteve za obvezne in neobvezne oznake industrijskih ventilov za splošno uporabo. Določa metode za uporabo označb na ohišju, prirobnici, označevalni tablici ali na katerem koli drugem mestu.
Ta dokument se obravnava v povezavi z določenimi zahtevami standardov za izdelke ventilov ali standardov za delovanje ventilov.
Področje uporabe tega dokumenta ne zajema zahtev za označevanje za plastične ventile.

General Information

Status
Published
Publication Date
04-Aug-2019
ICS
23.060.01 - Valves in general
Technical Committee
ISO/TC 153 - Valves
Drafting Committee
ISO/TC 153 - Valves
Current Stage
9020 - International Standard under periodical review
Start Date
15-Apr-2024
Completion Date
15-Apr-2024
Ref Project
SIST ISO 5209:2023 - General purpose industrial valves - Marking

Relations

Revises
ISO 5209:1977 - General purpose industrial valves — Marking
Effective Date
16-Jun-2018

Buy Standard

ISO 5209:2019 - General purpose industrial valves -- MarkingISO 5209:2019 - General purpose industrial valves -- Marking
PreviousNext
Standard
ISO 5209:2019 - General purpose industrial valves -- Marking
English language
6 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 5209:2023ISO 5209:2023
PreviousNext
Standard
ISO 5209:2023
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 5209
Second edition
2019-08
General purpose industrial valves —
Marking
Appareils de robinetterie industrielle d'usage général — Marquage
Reference number
ISO 5209:2019(E)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO 5209:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 5209:2019(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements . 2
4.1 General . 2
4.2 Mandatory markings . . 2
4.3 Supplementary markings . 2
4.4 Other markings . 2
4.5 Omission of markings . 3
5 Details of markings . 4
5.1 Nominal size . 4
5.2 PN/Class designation . 4
5.3 Material . 4
5.4 Manufacturer's name or trademark . 4
5.5 Arrow for direction of flow . 5
5.6 Ring joint number . 5
5.7 Maximum allowable temperature, TS .
...

SLOVENSKI STANDARD
SIST ISO 5209:2023
01-april-2023
Industrijski ventili za splošno uporabo - Označevanje
General purpose industrial valves - Marking
Appareils de robinetterie industrielle d'usage général - Marquage
Ta slovenski standard je istoveten z: ISO 5209:2019
ICS:
23.060.01 Ventili na splošno Valves in general
SIST ISO 5209:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST ISO 5209:2023

---------------------- Page: 2 ----------------------
SIST ISO 5209:2023
INTERNATIONAL ISO
STANDARD 5209
Second edition
2019-08
General purpose industrial valves —
Marking
Appareils de robinetterie industrielle d'usage général — Marquage
Reference number
ISO 5209:2019(E)
©
ISO 2019

---------------------- Page: 3 ----------------------
SIST ISO 5209:2023
ISO 5209:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 4 ----------------------
SIST ISO 5209:2023
ISO 5209:2019(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements . 2
4.1 General . 2
4.2 Mandatory markings . . 2
4.3 Supplementary markings . 2
4.4 Other markings . 2
4.5 Omission of markings . 3
5 Details of markings . 4
5.1 Nominal size . 4
5.2 PN/Class designation . 4
5.3 Material . 4
5.4 Manufacturer's name or trademark .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 5640:2024(Main)
Industrial valves — Mounting kits for part-turn valve actuator attachment

This document provides requirements for metallic mounting kits for part-turn valves and actuator attachments. It includes all components transmitting torques from actuators to valves with a maximum flange torque up to 16 000 Nm (up to F30 flange type). It applies to mounting kits for part-turn valves and actuators with integral attachment flanges and drive components as described in ISO 5211, when direct mounting of the actuator on valve is not practical. Stacking of mounting kits/intermediate supports is not within the scope of this document. This document specifies methods for design and environmental corrosion protection. When a reference is made to this document, all the requirements apply, unless otherwise agreed between the purchaser and the manufacturer/supplier, prior to order. In this document, the term "valve" covers valve or shaft extension top-flange, and the term “actuator” covers part-turn actuator or combination of multi-turn actuator and gearbox. Control valves are excluded from this document.

  • Standard
    16 pages
    English language
    sale 15% off
ISO
ISO 5115:2023(Main)
Industrial valves — Part-turn valve actuation

This document applies to part-turn actuated valve assemblies comprising valve (e.g. ball valve, butterfly valve, and plug valve), actuator and, when required, a mounting kit supplied as a package. It defines the design considerations necessary for automating valves, the responsibilities for the information required and tasks to be completed, to ensure suitable actuator and mounting kit sizing, selection and assembly on the valve. It applies to pneumatic, hydraulic, electro-hydraulic and electric actuators. An actuator coupled to a gearbox, as defined in ISO 5211, is included in the scope of this document. Lever or manual gearbox operated valves are excluded.

  • Standard
    25 pages
    English language
    sale 15% off
  • Standard
    30 pages
    French language
    sale 15% off
ISO
ISO 5210:2023(Main)
Industrial valves — Multi-turn valve actuator attachments

This document specifies the requirements for the attachment of multi-turn actuators to valves. Throughout this document, “actuator” can be understood as “actuator and/or gearbox” providing a multi-turn and/or linear output. It specifies: — flange dimensions necessary for the attachment of actuators to industrial valves [see Figure 1 a)] or to intermediate supports [see Figure 1 b)]; — those driving component dimensions of actuators which are necessary to attach them to the driven components; — reference values for torque and thrust for flanges having the dimensions specified in this document.

  • Standard
    19 pages
    English language
    sale 15% off
  • Standard
    20 pages
    French language
    sale 15% off
ISO
ISO 5211:2023(Main)
Industrial valves — Part-turn actuator attachments

This document specifies requirements for the attachment of part-turn actuators, with or without gearboxes, to industrial valves. The attachment of part-turn actuators to control valves in accordance with the requirements of this document is subject to an agreement between the supplier and the purchaser. This document specifies: — flange dimensions necessary for the attachment of part-turn actuators to industrial valves [see Figures 1 a) and 1 c)] or to intermediate supports [see Figures 1 b) and 1 d)]; — driving component dimensions of part-turn actuators necessary to attach them to the driven components; — reference values for torques for interfaces and for couplings having the dimensions specified in this document. The attachment of the intermediate support to the valve is out of the scope of this document.

  • Standard
    28 pages
    English language
    sale 15% off
  • Standard
    28 pages
    French language
    sale 15% off
ISO
ISO 5117:2023(Main)
Automatic steam traps — Production and performance characteristic tests

This document specifies the production and performance relevant test requirements for automatic steam traps used for condensate removal/recovery services for optimized utilization of energy, in refinery, power generation or other general applications where steam is used as a medium of heat transfer. The tests can be classified as production tests and performance characteristic tests and can be conducted to ensure the correct functioning of a steam trap or to evaluate the performance of a particular design. This document specifies the tests performed relative to each one of these two categories and briefly describes the corresponding test methods.

  • Standard
    31 pages
    English language
    sale 15% off
  • Standard
    33 pages
    French language
    sale 15% off
ISO
ISO 10497:2022(Main)
Testing of valves — Fire type-testing requirements

This document specifies fire type-testing requirements and a fire type-test method for soft- and metal-seated isolation valves with one or more obturators. It is not applicable to the testing requirements for valve actuators other than manually operated gearboxes or similar mechanisms when these form part of the normal valve assembly. Other types of valve actuators (e.g. electrical, pneumatic or hydraulic) can need special protection to operate in the environment considered in this valve test, and the fire testing of such actuators is outside the scope of this document. This document specifies the measurement and assessment criteria for: a) through-seat leakage; b) external leakage; c) cavity overpressure relief of double-seated valves; d) operability. This document specifies the rules whereby the fire-type testing qualification for a valve can be extended to untested sizes, pressure ratings and materials of construction of the same basic design type. Fire test reports of valves tested according to previous editions of this document are acceptable when submitted together with the full and compliant fire test report as per 6.7 of the edition under which it was tested. Any data missing as required from 6.7 within the fire test report are accepted or rejected at the purchaser’s discretion. NOTE For the purposes of this document, the terms “fire type-test” and “fire test” are synonymous.

  • Standard
    18 pages
    English language
    sale 15% off
  • Standard
    21 pages
    French language
    sale 15% off
ISO
ISO 28921-1:2022(Main)
Industrial valves — Isolating valves for low-temperature applications — Part 1: Design, manufacturing and production testing

This document specifies requirements for design, dimensions, material, fabrication and production testing of gate, globe, ball/plug and butterfly valve design types used as isolation valves and check valves for low-temperature applications. This document is applicable to isolation valves for use in low and cryogenic temperature service where the design low-temperature service is -50 °C down to –196 °C. This document does not apply to valves for cryogenic services, designed in accordance with ISO 21011, used with cryogenic vessels. Where the requirements of this document vary from those given in the valve product standards, the requirements of this document apply. This document is applicable to valves with body, bonnet, bonnet extension or cover made of metallic materials. This document is applicable to: — valves of nominal sizes DN: 10; 15; 20; 25; 32; 40; 50; 65; 80; 100; 125; 150; 200; 250; 300; 350; 400; 450; 500; 600; 650; 700; 750; 800; 850; 900; 950; 1 000; 1 050; 1 200; 1 350; 1 400; 1 500; 1 600; 1 650; 1 800, — corresponding to nominal pipe sizes NPS: ⅜; ½; ¾; 1; 1 ¼; 1 ½; 2; 2 ½; 3; 4; 5; 6; 8; 10; 12; 14; 16; 18; 20; 24; 26; 28; 30; 32; 34; 36; 38; 40; 42; 48; 54; 56; 60; 64; 66; 72, and applies to pressure designations: — PN 16; 25; 40; 100; 160; 250; 400, — Class 150; 300; 600; 800; 900; 1 500; 2 500. NOTE Not all type and size combination are available in all pressure ratings. This document does not apply to safety valves and control valves.

  • Standard
    27 pages
    English language
    sale 15% off
  • Standard
    27 pages
    French language
    sale 15% off
ISO
ISO 5752:2021(Main)
Metal valves for use in flanged pipe systems — Face-to-face and centre-to-face dimensions

This document specifies the basic series of face-to-face (FTF) and centre-to-face (CTF) dimensions for two-way metal valves of the gate, globe, diaphragm, ball, plug, butterfly design types used as isolating and check valves in flanged pipe systems. Each basic series of face-to-face and centre-to-face dimensions can be used as required with flanges of mating dimensions conforming to the equivalent EN or ASME flange series. This document covers valves with the following PN, Class, DN and NPS values: — PN 2,5; PN 6; PN 10; PN 16; PN 25; PN 40; PN 63; PN 100; PN 160; PN 250; PN 320; PN 400; — Class 125; Class 150; Class 250; Class 300; Class 600; Class 900; Class 1 500; Class 2 500; — DN 10; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 650; DN 700; DN 750; DN 800; DN 900; DN 1 000; DN 1 050; DN 1 200; DN 1 400; DN 1 600; DN 1 800; DN 2 000; — corresponding to nominal sizes NPS: ⅜; ½; ¾; 1; 1 ¼; 1 ½; 2; 2 ½; 3; 4; 5; 6; 8; 10; 12; 14; 16; 18; 20; 24; 26; 28; 30; 32; 36; 40; 42; 48; 56; 64; 72; 80. NOTE See Annex B for the relationship between DN and NPS.

  • Standard
    35 pages
    English language
    sale 15% off
ISO
ISO 23632:2021(Main)
Industrial valves — Design validation-testing of valves

Le présent document spécifie les exigences et les critères d’acceptation pour les essais de type, conformes aux conditions de conception, des robinets à tournant sphérique métalliques et robinets à papillon métalliques utilisés pour des services de sectionnement pour toutes les applications industrielles, et sert à valider la conception des produits sur 205 cycles. Le présent document exclut les essais de dispositifs de sécurité, de robinets de régulation, de robinets en matériaux thermoplastiques, et des robinets pour l’alimentation en eau destinée à la consommation humaine et en eaux usées (par exemple la série EN 1074). Le présent document définit la procédure permettant d’étendre la qualification de l’appareil de robinetterie soumis à l’essai à des désignations de dimensions et de pression non soumises à l’essai de la même gamme de produits. Cet essai de type a pour objet de valider la performance de siège pour la relation pression/température précisée par le fabricant, qui figure dans la documentation technique du produit donnée par le fabricant. Cet essai de type vérifie les exigences de couple et le couple de manœuvre maximale admissible (MAST), tels que donnés dans la documentation technique du fabricant. Cet essai de type valide la durabilité de la performance de siège et le couple de manœuvre grâce à des cycles mécaniques et thermiques.

  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    15 pages
    French language
    sale 15% off
ISO
ISO 22109:2020(Main)
Industrial valves — Gearbox for valves

This document provides basic requirements for gearboxes to operate industrial valves for manual and automated on/off and modulating duties, this includes manual override gearboxes. It includes guidelines for classification, design and methods for conformity assessment. It does not cover gear systems which are integral part in the design of valves and subsea gearboxes. Other requirements or conditions of use different from those indicated in this document are agreed between the purchaser and the manufacturer or supplier (first party), prior to order.

  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    14 pages
    French language
    sale 15% off