ISO/TS 10303-332:2002
(Main)Industrial automation systems and integration — Product data representation and exchange — Part 332: Abstract test suite: Technical data packaging core information and exchange
Industrial automation systems and integration — Product data representation and exchange — Part 332: Abstract test suite: Technical data packaging core information and exchange
This part of ISO 10303 specifies the abstract test suite to be used in the conformance testing of implementations of ISO 10303-232. The following are within the scope of this part of ISO 10303: — the specification of the test purposes associated with ISO 10303-232; — the verdict criteria to be applied during conformance testing of an implementation of ISO 10303- 232 using ISO 10303-21 or ISO 10303-22; NOTE The verdict criteria are used to ascertain whether a test purpose has been satisfactorily met by an implementation under test (IUT) within the context of a given test case. — the abstract test cases to be used as the basis for the executable test cases for conformance testing. The following are outside the scope of this part of ISO 10303: — the creation of executable test cases; — test specifications for tests other than conformance testing such as interoperability or acceptance testing; — other implementation methods.
Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 332: Suite d'essai abstrait: Paquet de données techniques
General Information
Buy Standard
Standards Content (Sample)
TECHNICAL ISO/TS
SPECIFICATION 10303-332
First edition
2002-04-15
Industrial automation systems and
integration — Product data representation
and exchange —
Part 332:
Abstract test suite: Technical data
packaging core information and exchange
Systèmes d'automatisation industrielle et intégration — Représentation et
échange de données de produits —
Partie 332: Suite d'essai abstrait: Paquet de données techniques
Reference number
©
ISO 2002
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
This CD-ROM contains:
1) the publication ISO/TS 10303-332 in portable document format (PDF), which can be viewed using
Adobe® Acrobat® Reader;
2) postprocessor input specifications for this part of ISO 10303, as indicated
...
TECHNICAL ISO/TS
SPECIFICATION 10303-332
First edition
2002-04-15
Industrial automation systems and
integration — Product data representation
and exchange —
Part 332:
Abstract test suite: Technical data
packaging core information and exchange
Systèmes d'automatisation industrielle et intégration — Représentation et
échange de données de produits —
Partie 332: Suite d'essai abstrait: Paquet de données techniques
Reference number
©
ISO 2002
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2002
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 2002 – All rights reserved
Contents Page
1 Scope . 1
2 Normative references. 1
3 Terms, definitions, and abbreviations. 2
3.1 Terms defined in ISO 10303-1 . 2
3.2 Terms defined in ISO 10303-31 . 2
3.3 Terms defined in ISO 10303-232 . 3
3.4 Other terms and definitions . 3
3.5 Abbreviations . 4
4 Test purposes. 4
4.1 Application element test purposes. 5
4.2 AIM test purposes. 52
4.3 Implementation method test purposes . 53
4.4 Domain test purposes . 53
5 General test purposes and verdict criteria. 57
5.1 General test purposes. 57
5.2 General verdict criteria for all abstract test cases . 57
5.3 General verdict criteria for preprocessor abstract test cases. 57
5.4 General verdict criteria for postprocessor abstract test cases . 57
6 Abstract test cases. 58
6.1 1UoF_DDE_for_files . 59
6.2 2UoF_DDE_for_TDP_elements . 65
6.3 4UoF_PL1 . 73
6.4 4UoF_PL2 . 83
6.5 4SMPL_initial . 93
6.6 4SMPL_revised . 120
6.7 4SMPL_em. 153
6.8 4SMPL_instl_rqmts. 167
6.9 4SMPL_developmental . 192
6.10 6UoF_IDL1 . 208
6.11 6UoF_IDL2 . 215
6.12 6SCML_initial. 224
6.13 6SCML_revised. 244
6.14 6SCML_removeSCP . 264
Annex A (normative) Conformance classes. 276
A.1 Conformance class 1. 276
A.2 Conformance class 2. 276
A.3 Conformance class 3. 276
A.4 Conformance class 4. 276
A.5 Conformance class 5. 277
A.6 Conformance class 6. 277
A.7 Conformance class 7. 277
A.8 Conformance class 8. 277
A.9 Conformance class 9. 277
A.10 Conformance class 10. 277
A.11 Conformance class 11. 278
A.12 Conformance class 12. 278
A.13 Conformance class 13. 278
A.14 Conformance class 14. 278
Annex B (normative) Information object registration. 279
Annex C (normative) Computer interpretable postprocessor input specification . 280
Annex D (informative) Excluded test purposes. 281
Annex E (informative) Instance diagrams. 282
E.1 1UoF_DDE_for_files. 282
E.2 2UoF_DDE_for_TDP_elements. 283
E.3 4UoF_PL1. 284
E.4 4UoF_PL2. 286
E.5 4SMPL_initial. 288
E.6 4SMPL_revised. 296
E.7 4SMPL_em . 308
E.8 4SMPL_instl_rqmts . 312
E.9 4SMPL_developmental. 320
E.10 6UoF_IDL1. 325
E.11 6UoF_IDL2. 326
E.12 6SCML_initial . 328
E.13 6SCML_revised . 333
E.14 6SCML_removeSCP. 339
Bibliography. 341
Index. 342
Figures
Figure E. 1 – Instance diagram 1 of 59. 282
Figure E. 2 – Instance diagram 2 of 59. 283
Figure E. 3 – Instance diagram 3 of 59. 284
Figure E. 4 – Instance diagram 4 of 59. 285
Figure E. 5 – Instance diagram 5 of 59. 286
Figure E. 6 – Instance diagram 6 of 59. 287
Figure E. 7 – Instance diagram 7 of 59. 288
Figure E. 8 – Instance diagram 8 of 59. 289
Figure E. 9 – Instance diagram 9 of 59. 290
Figure E. 10 – Instance diagram 10 of 59. 291
Figure E. 11 – Instance diagram 11 of 59. 292
Figure E. 12 – Instance diagram 12 of 59. 293
Figure E. 13 – Instance diagram 13 of 59. 294
Figure E. 14 – Instance diagram 14 of 59. 295
Figure E. 15 – Instance diagram 15 of 59. 296
Figure E. 16 – Instance diagram 16 of 59. 297
iv © ISO 2002 – All rights reserved
Figure E. 17 – Instance diagram 17 of 59. 298
Figure E. 18 – Instance diagram 18 of 59. 299
Figure E. 19 – Instance diagram 19 of 59. 300
Figure E. 20 – Instance diagram 20 of 59. 301
Figure E. 21 – Instance diagram 21 of 59. 302
Figure E. 22 – Instance diagram 22 of 59. 303
Figure
...
TECHNICAL ISO/TS
SPECIFICATION 10303-332
First edition
2002-04-15
Industrial automation systems and
integration — Product data representation
and exchange —
Part 332:
Abstract test suite: Technical data
packaging core information and exchange
Systèmes d'automatisation industrielle et intégration — Représentation et
échange de données de produits —
Partie 332: Suite d'essai abstrait: Paquet de données techniques
Reference number
©
ISO 2002
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
This CD-ROM contains:
1) the publication ISO/TS 10303-332 in portable document format (PDF), which can be viewed using
Adobe® Acrobat® Reader;
2) postprocessor input specifications for this part of ISO 10303, as indicated
...
TECHNICAL ISO/TS
SPECIFICATION 10303-332
First edition
2002-04-15
Industrial automation systems and
integration — Product data representation
and exchange —
Part 332:
Abstract test suite: Technical data
packaging core information and exchange
Systèmes d'automatisation industrielle et intégration — Représentation et
échange de données de produits —
Partie 332: Suite d'essai abstrait: Paquet de données techniques
Reference number
©
ISO 2002
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2002
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 2002 – All rights reserved
Contents Page
1 Scope . 1
2 Normative references. 1
3 Terms, definitions, and abbreviations. 2
3.1 Terms defined in ISO 10303-1 . 2
3.2 Terms defined in ISO 10303-31 . 2
3.3 Terms defined in ISO 10303-232 . 3
3.4 Other terms and definitions . 3
3.5 Abbreviations . 4
4 Test purposes. 4
4.1 Application element test purposes. 5
4.2 AIM test purposes. 52
4.3 Implementation method test purposes . 53
4.4 Domain test purposes . 53
5 General test purposes and verdict criteria. 57
5.1 General test purposes. 57
5.2 General verdict criteria for all abstract test cases . 57
5.3 General verdict criteria for preprocessor abstract test cases. 57
5.4 General verdict criteria for postprocessor abstract test cases . 57
6 Abstract test cases. 58
6.1 1UoF_DDE_for_files . 59
6.2 2UoF_DDE_for_TDP_elements . 65
6.3 4UoF_PL1 . 73
6.4 4UoF_PL2 . 83
6.5 4SMPL_initial . 93
6.6 4SMPL_revised . 120
6.7 4SMPL_em. 153
6.8 4SMPL_instl_rqmts. 167
6.9 4SMPL_developmental . 192
6.10 6UoF_IDL1 . 208
6.11 6UoF_IDL2 . 215
6.12 6SCML_initial. 224
6.13 6SCML_revised. 244
6.14 6SCML_removeSCP . 264
Annex A (normative) Conformance classes. 276
A.1 Conformance class 1. 276
A.2 Conformance class 2. 276
A.3 Conformance class 3. 276
A.4 Conformance class 4. 276
A.5 Conformance class 5. 277
A.6 Conformance class 6. 277
A.7 Conformance class 7. 277
A.8 Conformance class 8. 277
A.9 Conformance class 9. 277
A.10 Conformance class 10. 277
A.11 Conformance class 11. 278
A.12 Conformance class 12. 278
A.13 Conformance class 13. 278
A.14 Conformance class 14. 278
Annex B (normative) Information object registration. 279
Annex C (normative) Computer interpretable postprocessor input specification . 280
Annex D (informative) Excluded test purposes. 281
Annex E (informative) Instance diagrams. 282
E.1 1UoF_DDE_for_files. 282
E.2 2UoF_DDE_for_TDP_elements. 283
E.3 4UoF_PL1. 284
E.4 4UoF_PL2. 286
E.5 4SMPL_initial. 288
E.6 4SMPL_revised. 296
E.7 4SMPL_em . 308
E.8 4SMPL_instl_rqmts . 312
E.9 4SMPL_developmental. 320
E.10 6UoF_IDL1. 325
E.11 6UoF_IDL2. 326
E.12 6SCML_initial . 328
E.13 6SCML_revised . 333
E.14 6SCML_removeSCP. 339
Bibliography. 341
Index. 342
Figures
Figure E. 1 – Instance diagram 1 of 59. 282
Figure E. 2 – Instance diagram 2 of 59. 283
Figure E. 3 – Instance diagram 3 of 59. 284
Figure E. 4 – Instance diagram 4 of 59. 285
Figure E. 5 – Instance diagram 5 of 59. 286
Figure E. 6 – Instance diagram 6 of 59. 287
Figure E. 7 – Instance diagram 7 of 59. 288
Figure E. 8 – Instance diagram 8 of 59. 289
Figure E. 9 – Instance diagram 9 of 59. 290
Figure E. 10 – Instance diagram 10 of 59. 291
Figure E. 11 – Instance diagram 11 of 59. 292
Figure E. 12 – Instance diagram 12 of 59. 293
Figure E. 13 – Instance diagram 13 of 59. 294
Figure E. 14 – Instance diagram 14 of 59. 295
Figure E. 15 – Instance diagram 15 of 59. 296
Figure E. 16 – Instance diagram 16 of 59. 297
iv © ISO 2002 – All rights reserved
Figure E. 17 – Instance diagram 17 of 59. 298
Figure E. 18 – Instance diagram 18 of 59. 299
Figure E. 19 – Instance diagram 19 of 59. 300
Figure E. 20 – Instance diagram 20 of 59. 301
Figure E. 21 – Instance diagram 21 of 59. 302
Figure E. 22 – Instance diagram 22 of 59. 303
Figure
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.