ISO 17572-2:2018

Intelligent transport systems (ITS) — Location referencing for geographic databases — Part 2: Pre-coded location references (pre-coded profile)

The ISO 17572 series specifies LRMs that describe locations in the context of geographic databases and are used to locate transport-related phenomena in an encoder system as well as in the decoder side. The ISO 17572 series defines what is meant by such objects and describes the reference in detail, including whether or not components of the reference are mandatory or optional, and their characteristics. The ISO 17572 series specifies two different LRMs: — pre-coded location references (pre-coded profile); — dynamic location references (dynamic profile). The ISO 17572 series does not define a physical format for implementing the LRM. However, the requirements for physical formats are defined. This document specifies the pre-coded LRM, comprising: — specification of pre-coded location references (pre-coded profile); — logical format for VICS link location (Annex A); — TPEG physical format for ALERT-C (TMC) location references (Annex B, C & D); — TPEG physical format for ETLs (Annex E, F & G); — TPEG physical format for Korean node-link ID references (Annex H, I & J). — logical format for Road Section Identification Data set (Annex K).

Systèmes intelligents de transport (SIT) — Localisation pour bases de données géographiques — Partie 2: Localisations précodées (profil précodé)

General Information

• Status: Published
• Publication Date: 29-Aug-2018
• ICS: 03.220.01 - Transport in general
• ICS: 35.240.60 - IT applications in transport
• Technical Committee: ISO/TC 204 - Intelligent transport systems
• Drafting Committee: ISO/TC 204/WG 3 - ITS geographic data
• Current Stage: 9060 - Close of review
• Start Date: 04-Mar-2029

Relations

• Revises: ISO 17572-2:2015 - Intelligent transport systems (ITS) — Location referencing for geographic databases — Part 2: Pre-coded location references (pre-coded profile)
• Effective Date: 05-Nov-2015

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 17572-2
Third edition
2018-09
Intelligent transport systems (ITS) —
Location referencing for geographic
databases —
Part 2:
Pre-coded location references (pre-
coded profile)
Systèmes intelligents de transport (SIT) — Localisation pour bases de
données géographiques —
Partie 2: Localisations précodées (profil précodé)
Reference number
ISO 17572-2:2018(E)
©
ISO 2018

---------------------- Page: 1 ----------------------
ISO 17572-2:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 17572-2:2018(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms . 2
5 Requirements for a location referencing standard . 2
6 Conceptual data model for LRMs . 3
7 Specification of pre-coded location references . 3
7.1 General concept . 3
7.2 LDB creation and updating . 4
7.3 LDB provision . 4
7.4 LDB usage . 4
8 Implementations at present . 4
8.1 General . 4
8.2 VICS . 4
8.2.1 LDB creation . 4
8.2.2 LDB usage . 5
8.3 TMC/AL
...