ISO 7376-2:1997
(Main)Laryngoscopic fittings - Part 2: Miniature electric lamps - Screw threads and sockets for conventional blades
Laryngoscopic fittings - Part 2: Miniature electric lamps - Screw threads and sockets for conventional blades
Éléments de laryngoscopes — Partie 2: Lampes électriques miniatures — Filetages et douilles pour lames conventionnelles
General Information
Relations
Frequently Asked Questions
ISO 7376-2:1997 is a standard published by the International Organization for Standardization (ISO). Its full title is "Laryngoscopic fittings - Part 2: Miniature electric lamps - Screw threads and sockets for conventional blades". This standard covers: Laryngoscopic fittings - Part 2: Miniature electric lamps - Screw threads and sockets for conventional blades
Laryngoscopic fittings - Part 2: Miniature electric lamps - Screw threads and sockets for conventional blades
ISO 7376-2:1997 is classified under the following ICS (International Classification for Standards) categories: 11.040.55 - Diagnostic equipment; 29.140.20 - Incandescent lamps. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 7376-2:1997 has the following relationships with other standards: It is inter standard links to ISO 7376-2:1984, ISO 7376:2003. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO 7376-2:1997 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 7376-2
Second edition
1997-12-15
Laryngoscopic fittings —
Part 2:
Miniature electric lamps — Screw threads and
sockets for conventional blades
Éléments de laryngoscopes —
Partie 2: Lampes électriques miniatures — Filetages et douilles pour lames
conventionnelles
AA
Reference number
Contents
1 Scope .1
2 Normative references .1
3 Definitions .1
4 Materials .1
5 Electric lamp.2
5.1 Metal cap and base contact .2
5.2 Screw thread for lamp .2
6 Sockets .2
6.1 Dimensions and centre contact .2
6.2 Internal screw thread for socket .2
Annex A Bibliography .4
© ISO 1997
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet central@iso.ch
X.400 c=ch; a=400net; p=iso; o=isocs; s=central
Printed in Switzerland
ii
©
ISO ISO 7376-2:1997(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
This second edition cancels and replaces the first edition (ISO 7376-2:1984), which has been technically revised.
International Standard ISO 7376-2 was prepared by Technical Committee ISO/TC 121, Anaesthetic and respiratory
equipment, Subcommittee SC 2, Tracheal tubes and other equipment.
ISO 7376 consists of the following parts, under the general title Laryngoscopic fittings
— Part 1: Conventional hook-on type handle-blade fittings
— Part 2: Miniature electric lamps — Screw threads and sockets for conventional blades
— Part 3: Fibre-illuminated re-usable rigid laryngoscopes.
Annex A is for information only.
iii
©
Introduction
This part of ISO 7376 has been prepared in order to specify screw threads for miniature electric lamps and lamp
sockets used in laryngoscope blades as described in ISO 7376-1, to ensure the interchangeability of lamps in
laryngoscopic blades made by different manufacturers. The screw thread dimensions as given in 5.2 and 6.2 are in
inch systems because the most prevalent lamp and socket thread systems used in rigid laryngoscopes for the past
50 years have conformed to published inch thread standards.
iv
INTERNATIONAL STANDARD © ISO ISO 7376-2:1997(E)
Laryngoscopic fittings — Part 2: Miniature electric lamps — Screw
threads and sockets for conventional blades
1 Scope
This part of ISO 7376 specifies requirements for screw threads for miniature electric lamps and lamp sockets used
in laryngoscopic blades as described in ISO
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...