Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvents

ISO 3175-3:2017 specifies drycleaning procedures for hydrocarbon solvents, using commercial drycleaning machines, for fabrics and garments. It comprises procedures for normal and sensitive materials (see 3.3 and 3.4). Localized staining and stain removal fall outside the scope of this document.

Textiles — Entretien professionnel, nettoyage à sec et nettoyage à l'eau des étoffes et des vêtements — Partie 3: Mode opératoire pour évaluer la résistance au nettoyage et à la finition avec des solvants hydrocarbonés

L'ISO 3175-3:2017 spécifie des modes opératoires de nettoyage à sec pour les solvants hydrocarbonés mettant en ?uvre des machines professionnelles de nettoyage à sec pour les étoffes et les vêtements. Elle comporte des modes opératoires pour les articles normaux et sensibles (voir 3.3 et 3.4). L'élimination des taches localisées et des salissures ne relève pas du domaine d'application du présent document.

General Information

Status
Published
Publication Date
07-Dec-2017
Current Stage
9093 - International Standard confirmed
Completion Date
19-Apr-2023
Ref Project

Relations

Buy Standard

Standard
ISO 3175-3:2017 - Textiles -- Professional care, drycleaning and wetcleaning of fabrics and garments
English language
7 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 3175-3:2017 - Textiles -- Professional care, drycleaning and wetcleaning of fabrics and garments
English language
7 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 3175-3:2017 - Textiles -- Entretien professionnel, nettoyage a sec et nettoyage a l'eau des étoffes et des vetements
French language
10 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 3175-3
Second edition
2017-12
Corrected version
2019-12
Textiles — Professional care,
drycleaning and wetcleaning of fabrics
and garments —
Part 3:
Procedure for testing performance
when cleaning and finishing using
hydrocarbon solvents
Textiles — Entretien professionnel, nettoyage à sec et nettoyage à
l'eau des étoffes et des vêtements —
Partie 3: Mode opératoire pour évaluer la résistance au nettoyage et à
la finition avec des solvants hydrocarbonés
Reference number
ISO 3175-3:2017(E)
©
ISO 2017

---------------------- Page: 1 ----------------------
ISO 3175-3:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2017 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 3175-3:2017(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Reagents . 2
6 Apparatus and materials. 2
7 Conditioning . 3
8 Test specimen . 3
9 Procedure. 4
9.1 General . 4
9.2 Procedure for normal materials . 4
9.3 Procedures for sensitive materials . 5
10 Test report . 5
Bibliography . 7
© ISO 2017 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 3175-3:2017(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/ iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 2, Cleansing,
finishing and water resistance tests.
This second edition cancels and replaces the first edition (ISO 3175-3:2003), which has been technically
revised. It also incorporates the Technical Corrigendum ISO 3175-3:2003/Cor. 1:2009.
The main changes compared to the previous edition are as follows:
— the consistency in the structure of ISO 3175-2 and ISO 3175-3 has been improved;
— in 6.1.4, an automatic solvent dryness control of the drycleaning machine has been added;
— in Clause 7, clarification about the test specimen conditioning and the standard atmosphere has
been made;
— in Clause 8, clarification about the test specimen preparation has been made;
— in Table 1, the drying temperature for normal and sensitive materials in relation to the solvent
flashpoint has been changed and “5 min minimum until the temperature is lower than 45 °C” has
been added for deodorization time.
A list of all parts in the ISO 3175 series can be found on the ISO website.
This corrected version of ISO 3175-2:2017 incorporates the following corrections:
— in 8.2, the test specimen dimensions have been corrected.
iv © ISO 2017 – All rights reserved

---------------------- Page: 4 ----------------------
ISO 3175-3:2017(E)

Introduction
Drycleaning is a process for cleaning textiles in an organic solvent that dissolves oils and fats and
disperses particulate dirt substantially without the swelling and creasing associated with washing or
wetcleaning. Small quantities of water may be incorporated in the solvent with the aid of a detergent for
the purpose of obtaining better soil and stain removal. Some moisture-sensitive articles are preferably
drycleaned without the addition of water to the solvent. A detergent is often used to assist with soil
removal and reduce the risk of greying, but it should be borne in mind that detergents contain varying
amounts of water in their formulations.
Drycleaning is normally followed by an appropriate restorative finishing procedure. In most cases, this
comprises some form of steam treatment and/or hot pressing.
Properties of the textile or garment may change progressively on drycleaning and steaming and/or
pressing and in some cases, a single treatment may give little indication of the extent of dimensional
and other changes that may arise after repeated treatments and which may affect the useful life of
the article. Generally, most of the potential change will become apparent after three to five of the
drycleaning and finishing treatments specified in this document. These progressive changes should be
borne in mind when the interested parties determine the number of repeat cycles which is given.
The properties which should be considered in an assessment for drycleanability with the methods for
their assessment are given in ISO 3175-1.
© ISO 2017 – All rights reserved v

---------------------- Page: 5 ----------------------
INTERNATIONAL STANDARD ISO 3175-3:2017(E)
Textiles — Professional care, drycleaning and wetcleaning
of fabrics and garments —
Part 3:
Procedure for testing performance when cleaning and
finishing using hydrocarbon solvents
SAFETY PRECAUTIONS — When using drycleaning equipment, official regulations and normal
safety precautions should be observed.
1 Scope
This document specifies drycleaning procedures for hydrocarbon solvents, using commercial
drycleaning machines, for fabrics and garments. It comprises procedures for normal and sensitive
materials (see 3.3 and 3.4).
Localized staining and stain removal fall outside the scope of this document.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 139, Textiles — Standard atmospheres for conditioning and testing
ISO 3175-1, Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 1:
Assessment of performance after cleaning and finishing
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http:// www .electropedia .org/
— ISO Online browsing platform: available at https:// www .iso .org/ obp
3.1
material
garment, composite test specimen (3.2) or fabric
[SOURCE: ISO 3175-2:2017, 3.1]
3.2
composite test specimen
test specimen consisting of all component parts used in the finished item, and combined in a
representative assembly
[SOURCE: ISO 3175-1:2017, 3.1]
© ISO 2017 – All rights reserved 1

---------------------- Page: 6 ----------------------
ISO 3175-3:2017(E)

3.3
normal material
material (3.1) consisting of all component parts which is able to withstand the normal drycleaning
process as
...

DRAFT INTERNATIONAL STANDARD
ISO/DIS 3175-3
ISO/TC 38/SC 2 Secretariat: SAC
Voting begins on: Voting terminates on:
2016-08-29 2016-11-20
Textiles — Professional care, drycleaning and wetcleaning
of fabrics and garments —
Part 3:
Procedure for testing performance when cleaning and
finishing using hydrocarbon solvents
Textiles — Entretien professionnel, nettoyage à sec et nettoyage à l’eau des étoffes et des vêtements —
Partie 3: Mode opératoire pour évaluer la résistance au nettoyage et à la finition avec des solvants
hydrocarbonés
ICS: 59.080.01
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 3175-3:2016(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2016

---------------------- Page: 1 ----------------------
ISO/DIS 3175-3:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/DIS 3175-3:2016(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Reagents . 2
5.1 Hydrocarbon solvents . 2
5.2 Cocofattyaciddiethanolamide . 2
6 Apparatus and materials. 2
7 Conditioning . 3
8 Test specimen . 3
9 Procedure. 4
9.1 Generality . 4
9.2 Procedure for normal materials . 4
9.3 Procedures for sensitive materials . 5
10 Test report . 5
Bibliography . 7
© ISO 2016 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/DIS 3175-3:2016(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 3175-3 was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 2, Cleansing,
finishing and water resistance tests.
This second edition cancels and replaces the first edition (ISO 3175-3:2003), which has been technically
revised.
The main changes in comparison with the previous edition include:
— the improvement of the consistency in the structure of Part 2 and Part 3;
— in clause 3, withdrawal of “very sensitive material” (3.5);
— in sub-clause 6.1.4, the addition of an automatic solvent dryness control of the drycleaning machine;
— in clause 7, the clarification about the test specimen conditioning and the standard atmosphere;
— in Table 1, the change of the drying temperature for sensitive materials and the addition of “5 min
minimum until the temperature is lower than 45 °C” for deodorization time.
ISO 3175 consists of the following parts, under the general title Textiles — Professional care, drycleaning
and wetcleaning of fabrics and garments:
— Part 1: Assessment of performance after cleaning and finishing
— Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene
— Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvents
— Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning
iv © ISO 2016 – All rights reserved

---------------------- Page: 4 ----------------------
ISO/DIS 3175-3:2016(E)

Introduction
Drycleaning is a process for cleaning textiles in an organic solvent that dissolves oils and fats and
disperses particulate dirt substantially without the swelling and creasing associated with washing or
wetcleaning. Small quantities of water may be incorporated in the solvent with the aid of a detergent for
the purpose of obtaining better soil and stain removal. Some moisture-sensitive articles are preferably
drycleaned without the addition of water to the solvent. A detergent is often used to assist with soil
removal and reduce the risk of greying, but it must be borne in mind that detergents contain varying
amounts of water in their formulations.
Drycleaning is normally followed by an appropriate restorative finishing procedure. In most cases, this
comprises some form of steam treatment and/or hot pressing.
Properties of the textile or garment may change progressively on drycleaning and steaming and/or
pressing and in some cases a single treatment may give little indication of the extent of dimensional
and other changes that may arise after repeated treatments and which may affect the useful life of
the article. Generally, most of the potential change will become apparent after three to five of the
drycleaning and finishing treatments specified in this part of ISO 3175. This progressive change should
be borne in mind when the parties determine the number of repeat cycles which shall be given.
The properties which should be considered in an assessment for drycleanability with the methods for
their assessment are given in ISO 3175-1.
© ISO 2016 – All rights reserved v

---------------------- Page: 5 ----------------------
DRAFT INTERNATIONAL STANDARD ISO/DIS 3175-3:2016(E)
Textiles — Professional care, drycleaning and wetcleaning
of fabrics and garments —
Part 3:
Procedure for testing performance when cleaning and
finishing using hydrocarbon solvents
SAFETY PRECAUTIONS — When using drycleaning equipment, official regulations and normal
safety precautions should be observed.
1 Scope
This part of ISO 3175 specifies drycleaning procedures for hydrocarbon solvents, using commercial
drycleaning machines, for fabrics and garments. It comprises procedures for normal and sensitive
materials (see 3.3 and 3.4).
When using commercial drycleaning equipment, national regulations and normal safety precautions
should be observed.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 139, Textiles — Standard atmospheres for conditioning and testing
ISO 3175-1:1998, Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments —
Part 1: Assessment of performance after cleaning and finishing
3 Terms and definitions
For the purposes of this part of ISO 3175, the following terms and definitions apply.
3.1
material
garment, composite or fabri
...

NORME ISO
INTERNATIONALE 3175-3
Deuxième édition
2017-12
Textiles — Entretien professionnel,
nettoyage à sec et nettoyage à l'eau
des étoffes et des vêtements —
Partie 3:
Mode opératoire pour évaluer la
résistance au nettoyage et à la finition
avec des solvants hydrocarbonés
Textiles — Professional care, drycleaning and wetcleaning of fabrics
and garments —
Part 3: Procedure for testing performance when cleaning and
finishing using hydrocarbon solvents
Numéro de référence
ISO 3175-3:2017(F)
©
ISO 2017

---------------------- Page: 1 ----------------------
ISO 3175-3:2017(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2017, Publié en Suisse
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 3175-3:2017(F)

Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Principe . 2
5 Réactifs . 2
6 Appareillage et matériaux . 2
7 Conditionnement . 4
8 Éprouvettes . 4
9 Mode opératoire. 4
9.1 Généralités . 4
9.2 Mode opératoire pour les articles normaux . 4
9.3 Modes opératoires pour articles sensibles . 6
10 Rapport d’essai . 6
Bibliographie . 8
© ISO 2017 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 3175-3:2017(F)

Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes
nationaux de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est
en général confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l’ISO participent également aux travaux.
L’ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier de prendre note des différents
critères d’approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir www
.iso .org/ directives).
L’attention est attirée sur le fait que certains des éléments du présent document peuvent faire l’objet de
droits de propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant
les références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de
l’élaboration du document sont indiqués dans l’Introduction et/ou dans la liste des déclarations de
brevets reçues par l’ISO (voir www .iso .org/ brevets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un
engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l’ISO liés à l’évaluation de la conformité, ou pour toute information au sujet de l’adhésion
de l’ISO aux principes de l’Organisation mondiale du commerce (OMC) concernant les obstacles
techniques au commerce (OTC), voir le lien suivant: www .iso .org/ iso/ fr/ avant -propos .html.
Le présent document a été élaboré par le comité technique ISO/TC 38, Textiles, sous-comité SC 2,
Méthodes d’entretien, de finition et de résistance à l’eau.
Cette deuxième édition annule et remplace la première édition (ISO 3175-3:2003), qui a fait l’objet d’une
révision technique. Elle intègre également le Rectificatif technique ISO 3175-3:2003/Cor. 1:2009.
Les principales modifications par rapport à l’édition précédente sont les suivantes:
— l’harmonisation entre la structure de l’ISO 3175-2 et de l’ISO 3175-3 a été améliorée;
— en 6.1.4, un contrôleur automatique de séchage dans la machine de nettoyage à sec a été ajouté;
— dans l’Article 7, une clarification concernant le conditionnement de l’éprouvette et l’atmosphère
normale a été introduite;
— dans l’Article 8, une clarification concernant la préparation de l’éprouvette a été introduite;
— dans le Tableau 1, la température de séchage pour les articles normaux et sensibles a été modifiée
par rapport au point d’éclair du solvant et l’expression « 5 min au minimum jusqu’à ce que la
température soit inférieure à 45 °C » a été ajoutée pour la durée de désodorisation.
Une liste de toutes les parties de la série ISO 3175 se trouve sur le site Web de l’ISO.
iv © ISO 2017 – Tous droits réservés

---------------------- Page: 4 ----------------------
ISO 3175-3:2017(F)

Introduction
Le nettoyage à sec est un procédé de nettoyage des textiles dans un solvant organique qui dissout les
huiles et les graisses, et disperse de façon notable les salissures particulaires sans le gonflement ou
le froissement associé à un lavage ou à un nettoyage à l’eau professionnel. De faibles quantités d’eau
peuvent être ajoutées au solvant par l’intermédiaire d’un détergent afin d’obtenir une meilleure
élimination des taches et des souillures. Certains articles sensibles à l’humidité sont, de préférence,
nettoyés à sec sans adjonction d’eau dans le solvant. Un détergent est souvent utilisé pour faciliter
l’enlèvement des taches et réduire les risques de grisage, mais il convient de tenir compte du fait que les
détergents contiennent des quantités variables d’eau dans leur composition.
Le nettoyage à sec est habituellement suivi d’un traitement de finition approprié de remise en état.
Dans la plupart des cas, ce traitement consiste en un vaporisage et/ou un pressage à chaud.
Les propriétés d’un textile ou d’un vêtement peuvent se modifier progressivement au fur et à mesure
des nettoyages à sec, vaporisages et/ou pressages. Dans certains cas, un traitement unique peut
ne donner que des indications partielles quant à l’ampleur des variations dimensionnelles, et autres
modifications, susceptibles de se produire après des traitements répétés et d’influer sur la durée de vie
utile du produit. En général, la plupart des modifications potentielles ne deviennent visibles qu’au bout
de trois à cinq nettoyages à sec et traitements de finition spécifiés dans le présent document. Il convient
de tenir compte de ces changements progressifs lorsque les parties concernées déterminent le nombre
de cycles de répétition à réaliser.
Les propriétés qu’il convient de considérer lors de l’évaluation de l’aptitude au nettoyage à sec ainsi que
les méthodes d’évaluation correspondantes sont données dans l’ISO 3175-1.
© ISO 2017 – Tous droits réservés v

---------------------- Page: 5 ----------------------
NORME INTERNATIONALE ISO 3175-3:2017(F)
Textiles — Entretien professionnel, nettoyage à sec et
nettoyage à l'eau des étoffes et des vêtements —
Partie 3:
Mode opératoire pour évaluer la résistance au nettoyage et
à la finition avec des solvants hydrocarbonés
PRÉCAUTIONS DE SÉCURITÉ — Lors de l’utilisation d’un appareillage de nettoyage à sec, il
convient de respecter les réglementations officielles et de prendre les précautions normales de
sécurité.
1 Domaine d’application
Le présent document spécifie des modes opératoires de nettoyage à sec pour les solvants hydrocarbonés
mettant en œuvre des machines professionnelles de nettoyage à sec pour les étoffes et les vêtements.
Elle comporte des modes opératoires pour les articles normaux et sensibles (voir 3.3 et 3.4).
L’élimination des taches localisées et des salissures ne relève pas du domaine d’application du présent
document.
2 Références normatives
Les documents suivants cités dans le texte constituent, pour tout ou partie de leur contenu, des
exigences du présent document. Pour les références datées, seule l’édition citée s’applique. Pour les
références non datées, la dernière édition du document de référence s’applique (y compris les éventuels
amendements).
ISO 139, Textiles — Atmosphères normales de conditionnement et d’essai
ISO 3175-1, Textiles — Entretien professionnel, nettoyage à sec et nettoyage à l’eau des étoffes et des
vêtements — Partie 1: Évaluation de la résistance après le nettoyage et la finition
3 Termes et définitions
Pour les besoins du présent document, les termes et définitions suivants s’appliquent.
L’ISO et l’IEC tiennent à jour des bases de données terminologiques destinées à être utilisées en
normalisation, consultables aux adresses suivantes:
— IEC Electropedia: disponible à l’adresse http:// www .electropedia .org/ ;
— ISO Online browsing platform: disponible à l’adresse http:// www .iso .org/ obp.
3.1
article
vêtement, éprouvette composée (3.2) ou étoffe
[SOURCE: ISO 3175-2:2017, 3.1]
© ISO 2017 – Tous droits réservés 1

---------------------- Page: 6 ----------------------
ISO 3175-3:2017(F)

3.2
éprouvette composée
éprouvette constituée de tous les éléments composant l’article fini et combinés de manière à former un
assemblage représentatif
[SOURCE: ISO 3175-1:2017, 3.1]
3.3
article normal
article (3.1) constitué de tous ses composants qui peut supporter sans modification le mode opératoire
normal de nettoyage à sec, tel que spécifié dans le présent document
Note 1 à l’article: En tenant compte des observations décrites dans l’introduction concernant les change-
ments progressifs, les articles textiles soumis à essai conformément aux modes opératoires prévus pour
les articles normaux du Tableau 1 et produisant des résultats satisfaisants dans le cadre des évaluations
décrites dans l’ISO 3175-1 peuvent être étiquetés avec le symbole comme décrit dans l’ISO 3758.
3.4
article sensible
article (3.1) constitué de tous ses composants qui peut nécessiter des restrictions con
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.