ISO 10033-1:2011/Amd 1:2024

Laminated Veneer Lumber (LVL) — Bonding quality — Part 1: Test methods — Amendment 1

Lamibois — Qualité du collage — Partie 1: Méthodes d'essai — Amendement 1

General Information

• Status: Published
• Publication Date: 10-Oct-2024
• ICS: 79.060.99 - Other wood-based panels
• Technical Committee: ISO/TC 89/SC 3 - Plywood
• Drafting Committee: ISO/TC 89/SC 3 - Plywood
• Current Stage: 6060 - International Standard published
• Start Date: 11-Oct-2024
• Due Date: 11-Oct-2024
• Completion Date: 11-Oct-2024

Relations

• Amends: ISO 10033-1:2011 - Laminated Veneer Lumber (LVL) — Bonding quality — Part 1: Test methods
• Effective Date: 15-Oct-2022

Standards Content (Sample)

International
Standard
ISO 10033-1
First edition
Laminated Veneer Lumber (LVL) —
2011-04-15
Bonding quality —
AMENDMENT 1
Part 1:
2024-10
Test methods
AMENDMENT 1
Lamibois — Qualité du collage —
Partie 1: Méthodes d'essai
AMENDEMENT 1
Reference number
ISO 10033-1:2011/Amd.1:2024(en) © ISO 2024

ISO 10033-1:2011/Amd.1:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
ISO 10033-1:2011/Amd.1:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Par
...