ISO 16905:2015

Resilient floor coverings — Specification for rubber floor covering — Tile/Plank

ISO 16908:2015 specifies the characteristics of rubber floor tile/planks. ISO 16908:2015 includes a classification system based on intensity of use, which shows where resilient floor coverings should provide satisfactory service. ISO 16908:2015 specifies rubber floor tile/planks for applications involving the use of normal footwear and does not cover applications where special footwear, such as spiked shoes, may be involved.

Revêtements de sol résilients — Spécifications pour un revêtement de sol en caoutchouc — Tuile/Planche

General Information

• Status: Published
• Publication Date: 28-Sep-2015
• ICS: 97.150 - Floor coverings
• Technical Committee: ISO/TC 219 - Floor coverings
• Drafting Committee: ISO/TC 219/WG 2 - Resilient floor coverings
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 04-Dec-2020

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 16905
First edition
2015-10-01
Resilient floor coverings —
Specification for rubber floor
covering — Tile/Plank
Revêtements de sol résilients — Spécifications pour un revêtement de
sol en caoutchouc — Tuile/Planche
Reference number
ISO 16905:2015(E)
©
ISO 2015

---------------------- Page: 1 ----------------------
ISO 16905:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 16905:2015(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Categories of rubber floor coverings . 2
5 Requirements . 2
6 Marking, labelling, and packaging . 5
Annex A (informative) Optional properties . 6
Bibliography . 7
© ISO 2015 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 16905:2015(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information.
The committee responsible for this document is ISO/TC 219, Floor coverings.
iv © ISO 2015 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 16905:2015(E)
Resilient floor coverings — Specification for rubber floor
covering — Tile/Plank
1 Scope
This International Standard specifies the characteristics of rubber floor tile/planks.
This International Standard includes a classification system based on intensity of use, which shows
where resilient floor coverings should provide satisfactory service.
This International Standard specifies rubber floor tile/planks for applications involving the use of normal
footwear and does not cover applications where special footwear, such as spiked shoes, may be involved.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
ISO 4649-1, Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating
cylindrical drum device
1)
ISO 4918, Resilient, textile and laminate floor coverings — Castor chair test
ISO 7619-1, Rubber, vulcanized or thermoplastic — Determination of indentation hardness — Part 1:
Durometer method (Shore hardness)
ISO 10874, Resilient, textile and laminate floor coverings — Classification
ISO 23999, Resilient floor coverings — Determination of dimensional stability and curling after
exposure to heat
ISO 24342, Resilient and textile floor-coverings — Determination of side length, edge straightness and
squareness of tiles
ISO 24343-1, Resilient and laminate floor coverings — Determination of indentation and residual
indentation — Part 1: Residual indentation
ISO 24344, Resilient floor coverings — Determination of flexibility and deflection
ISO 24346, Resilient floor coverings — Determination of overall thickness
ASTM D3389, Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
EN 663, Resilient floor coverings — Determination of conventional pattern depth
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
rubber materials
polymeric binder in the rubber (3.2) floor covering satisfying the definition of rubber in ASTM D1566,
and having been vulcanized such that it became thermoset (3.3) as defined in ASTM D883
1) To be published. (Revision of ISO 4918:2009)
© ISO 2015 – All rights reserved 1

---------------------- Page: 5 ----------------------
ISO 16905:2015(E)

3.2
rubber
material that is capable of recovering from large deformations quickly and forcibly, and can be, or
already is, modified to a state in which it is ess
...