ISO 21433:2018
(Main)Plain bearings — Handling of plain bearings
Plain bearings — Handling of plain bearings
This document specifies requirements and guidance on the storage, transportation, handling, installation, operation and replacement of plain bearings and related parts.
Paliers lisses — Manipulation des paliers lisses
General Information
Buy Standard
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 21433
First edition
2018-10
Plain bearings — Handling of plain
bearings
Paliers lisses — Manipulation des paliers lisses
Reference number
ISO 21433:2018(E)
©
ISO 2018
---------------------- Page: 1 ----------------------
ISO 21433:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 21433:2018(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Storage and transportation . 1
4.1 General . 1
4.2 Storage and transportation by packing . 1
4.2.1 General. 1
4.2.2 Purpose of packing . . 1
4.2.3 Packing method . 2
4.2.4 Packing material . 2
4.2.5 Unpacking . 2
4.3 Storage and transportation in containers. 2
4.3.1 General. 2
4.3.2 Purpose of storage and transportation in containers . 2
4.3.3 Points to notice at storage and transportation . 3
4.3.4 Other methods of storage and transportation . 3
4.3.5 Attachment of test and quality certificate . 3
4.4 Selection of rust inhibitors and cleaning agents . 3
4.5 Storage environment .
...
INTERNATIONAL ISO
STANDARD 21433
First edition
2018-10
Plain bearings — Handling of plain
bearings
Paliers lisses — Manipulation des paliers lisses
Reference number
ISO 21433:2018(E)
©
ISO 2018
---------------------- Page: 1 ----------------------
ISO 21433:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 21433:2018(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Storage and transportation . 1
4.1 General . 1
4.2 Storage and transportation by packing . 1
4.2.1 General. 1
4.2.2 Purpose of packing . . 1
4.2.3 Packing method . 2
4.2.4 Packing material . 2
4.2.5 Unpacking . 2
4.3 Storage and transportation in containers. 2
4.3.1 General. 2
4.3.2 Purpose of storage and transportation in containers . 2
4.3.3 Points to notice at storage and transportation . 3
4.3.4 Other methods of storage and transportation . 3
4.3.5 Attachment of test and quality certificate . 3
4.4 Selection of rust inhibitors and cleaning agents . 3
4.5 Storage environment .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.