ISO 18616-2:2016

Transport packaging — Reusable, rigid plastic distribution boxes — Part 2: General specifications for testing

ISO 18616-2:2016 specifies the test methods for handling and managing reusable, rigid plastic distribution boxes. These boxes are based on the modular area 600 mm × 400 mm, 600 mm × 500 mm, 550 mm × 366 mm and subdivisions of them. ISO 18616-2:2016 is designed for general purpose applications in a returnable transport system. For automotive industry application, ISO 19709‑1, ISO/TS 19709-2 and ISO/TS 19709-3 can be referenced.

Emballages de transport — Boîtes de distribution en plastique rigide, réutilisables — Partie 2: Spécifications d'essai générales

General Information

• Status: Published
• Publication Date: 07-Nov-2016
• ICS: 55.180.40 - Complete, filled transport packages
• Technical Committee: ISO/TC 122 - Packaging
• Drafting Committee: ISO/TC 122 - Packaging
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 23-May-2022

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 18616-2
First edition
2016-11-15
Transport packaging — Reusable,
rigid plastic distribution boxes —
Part 2:
General specifications for testing
Emballages de transport — Boîtes de distribution en plastique rigide,
réutilisables —
Partie 2: Spécifications d’essai générales
Reference number
ISO 18616-2:2016(E)
©
ISO 2016

---------------------- Page: 1 ----------------------
ISO 18616-2:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 18616-2:2016(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Performance requirements . 1
4.1 Surfaces . 1
4.2 Dimensions . 2
4.3 Shape stability . 2
4.4 Stacking stability . 2
4.5 Base deflection . 2
5 Requirements before testing . 2
5.1 General . 2
5.2 Conditioning . 2
5.3 Dimensions and weight . 2
5.4 Test load . 3
5.4.1 General. 3
5.4.2 Test load inside the box . . 3
5.4.3 Test load on top of the box . 3
6 Test methods . 3
6.1 Stacking test using static load . 3
6.1.1 Test parameters . 3
6.1.2 Test method . 3
6.2 Drop test . 4
6.2.1 General. 4
6.2.2 Drop test 1 . 4
6.2.3 Drop test 2 . 4
6.2.4 Sequence . 4
6.3 Base deflection test . 7
6.3.1 Test parameters . 7
6.3.2 Test method . 7
Bibliography . 8
© ISO 2016 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 18616-2:2016(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,
as well as information about ISO’s adherence to the World Trade Organization (WTO) principles in the
Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.
The committee responsible for this document is ISO/TC 122, Packaging.
A list of all parts in the ISO 18616 series can be found on the ISO website.
iv © ISO 2016 – All rights reserved

---------------------- Page: 4 ----------------------
ISO 18616-2:2016(E)

Introduction
Standardization is a crucial element to improve the efficiency of a returnable packaging system in a
supply chain and can help to integrate a supply chain. Standardization of returnable transport items
(RTI) and its operation system (returnable transport system) is the first step for an efficient and
seamless supply cha
...