Information technology -- Concepts and usage of metadata

This document provides a usage scenario that utilizes the facilities defined in ISO/IEC 11179-3, ISO/IEC 19763-5 and ISO/IEC 19763-10 to demonstrate the registration of the mapping between process models. The availability of these registered process model mappings will help to promote the reuse of process models. The scope of this document is limited to a discussion of the process models associated with software development projects and the deliverables produced during these projects. This document describes a scenario that evaluates the combined usage of ISO/IEC 11179-3, ISO/IEC 19763-5 and ISO/IEC 19763-10 to enable the reuse of past knowledge of process models describing project processes and deliverables.

Technologies de l'information -- Concepts et utilisation des métadonnées

General Information

Status
Published
Publication Date
15-Jul-2018
Current Stage
6060 - International Standard published
Start Date
14-Jun-2018
Completion Date
16-Jul-2018
Ref Project

Buy Standard

Technical report
ISO/IEC TR 19583-22:2018 - Information technology -- Concepts and usage of metadata
English language
23 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (sample)

TECHNICAL ISO/IEC TR
REPORT 19583-22
First edition
2018-07
Information technology — Concepts
and usage of metadata —
Part 22:
Registering and mapping development
processes using ISO/IEC 19763
Technologies de l'information — Concepts et utilisation des
métadonnées —
Partie 22: L'enregistrant et mappant de processus de développement
à l'aide de ISO/IEC 19763
Reference number
ISO/IEC TR 19583-22:2018(E)
ISO/IEC 2018
---------------------- Page: 1 ----------------------
ISO/IEC TR 19583-22:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2018

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO/IEC 2018 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC TR 19583-22:2018(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

Introduction ..................................................................................................................................................................................................................................v

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms, definitions and abbreviated terms ................................................................................................................................ 1

3.1 Terms and definitions ....................................................................................................................................................................... 1

3.2 Abbreviated terms ............................................................................................................................................................................... 2

4 Assumptions .............................................................................................................................................................................................................. 2

4.1 Definition and registration of process models ............................................................................................................ 2

4.2 Registration of mappings between process models ............................................................................................... 2

5 The usage scenario ............................................................................................................................................................................................. 2

5.1 Outline ............................................................................................................................................................................................................ 2

5.2 Step 1: Define a model for the Standard Process Model and register it using ISO/

IEC 19763-5 ............................................................................................................................................................................................... 3

5.3 Step 2: Define a process model for the past projects and register them using ISO/

IEC 19763-5 ............................................................................................................................................................................................... 8

5.4 Step 3: Define a process model for the new project and register it using ISO/IEC

19763-5 ......................................................................................................................................................................................................11

5.5 Step 4: Define mappings between these models and register them using ISO/IEC

19763-10 ...................................................................................................................................................................................................15

Bibliography .............................................................................................................................................................................................................................23

© ISO/IEC 2018 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/IEC TR 19583-22:2018(E)
Foreword

ISO (the International Organization for Standardization) and IEC (the International Electrotechnical

Commission) form the specialized system for worldwide standardization. National bodies that are

members of ISO or IEC participate in the development of International Standards through technical

committees established by the respective organization to deal with particular fields of technical

activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international

organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the

work. In the field of information technology, ISO and IEC have established a joint technical committee,

ISO/IEC JTC 1.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for

the different types of document should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject

of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent

rights. Details of any patent rights identified during the development of the document will be in the

Introduction and/or on the ISO list of patent declarations received (see www .iso .org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following

URL www .iso .org/iso/foreword .html.

This document was prepared by Technical Committee ISO/IEC JTC 1, Information technology,

Subcommittee SC 32, Data, management and interchange.
A list of all parts in the ISO/IEC 19583 series can be found on the ISO website.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/members .html.
iv © ISO/IEC 2018 – All rights reserved
---------------------- Page: 4 ----------------------
ISO/IEC TR 19583-22:2018(E)
Introduction

The ISO/IEC 19583 series consists of Technical Reports showing how to implement ISO/IEC 11179 and

ISO/IEC 19763.

When a software development project is started the project structure, consisting of processes,

activities and tasks, is defined and described in the Project Initiation Document or Project Plan. The

project deliverables are also defined in these documents. These documents are then maintained until

the project is completed.

The project processes, activities and tasks can be modelled using a process model. A ‘standard project

process model’ is defined in ISO/IEC/IEEE 12207 but the process model for each project should be

defined and tailored to recognize the distinctive characteristics of that project. These tailored process

models, and their associated deliverables, should be preserved so that the processes, activities, tasks

and deliverables can be reused or adapted for new projects, enabling these new projects to be managed

efficiently and effectively and at low risk.

ISO/IEC/IEEE 12207 establishes a common framework for software development, containing the

processes, activities, and tasks that are to be applied during the whole lifecycle of a software product

or service. In software development, each organisation establishes its standard processes based on the

specification provided by ISO/IEC/IEEE 12207. During project initiation, the project manager defines

the processes, activities, and tasks for the project by tailoring the standard processes so that the new

project process model recognizes the distinctive characteristics of the project. For future projects with

similar characteristics the new project will be more efficiently and effectively managed with higher

quality deliverables produced at lower risk if an existing project process model can be easily reused.

© ISO/IEC 2018 – All rights reserved v
---------------------- Page: 5 ----------------------
TECHNICAL REPORT ISO/IEC TR 19583-22:2018(E)
Information technology — Concepts and usage of
metadata —
Part 22:
Registering and mapping development processes using
ISO/IEC 19763
1 Scope

This document provides a usage scenario that utilizes the facilities defined in ISO/IEC 11179-3, ISO/

IEC 19763-5 and ISO/IEC 19763-10 to demonstrate the registration of the mapping between process

models. The availability of these registered process model mappings will help to promote the reuse of

process models.

The scope of this document is limited to a discussion of the process models associated with software

development projects and the deliverables produced during these projects.

This document describes a scenario that evaluates the combined usage of ISO/IEC 11179-3, ISO/

IEC 19763-5 and ISO/IEC 19763-10 to enable the reuse of past knowledge of process models describing

project processes and deliverables.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

ISO/IEC 19763-1, Information technology — Metamodel framework for interoperability (MFI) — Part 1:

Framework

ISO/IEC 19763-5, Information technology — Metamodel framework for interoperability (MFI) — Part 5:

Metamodel for process model registration

ISO/IEC 19763-8, Information technology — Metamodel framework for interoperability (MFI) — Part 8:

Metamodel for role and goal model registration

ISO/IEC 19763-10, Information technology — Metamodel framework for interoperability (MFI) — Part 10:

Core model and basic mapping
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions

For the purposes of this document, the terms and definitions given in ISO/IEC 19763-1, ISO/IEC 19763-

5, ISO/IEC 19763-8, ISO/IEC 19763-10 and the following apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— IEC Electropedia: available at http: //www .electropedia .org/
— ISO Online browsing platform: available at https: //www .iso .org/obp
© ISO/IEC 2018 – All rights reserved 1
---------------------- Page: 6 ----------------------
ISO/IEC TR 19583-22:2018(E)
3.1.1
activity
set of cohesive tasks of process
[SOURCE: ISO/IEC/IEEE 12207:2017, 3.1.3]
3.1.2
project

endeavour with defined start and finish criteria undertaken to create a product or service in accordance

with specified resources and requirements
[SOURCE: ISO/IEC/IEEE 12207:2017, 3.1.37]
3.1.3
task

requirement, recommendation, or permissible action, intended to contribute to the achievement or one

or more outcomes or process required, recommended, or permissible action, intended to contribute to

the achievement of one or more outcomes of a process
[SOURCE: ISO/IEC/IEEE 12207:2017, 3.1.66]
3.2 Abbreviated terms
MDR metadata registry
MFI metamodel framework for interoperability
RDF Resource Description Framework
4 Assumptions
4.1 Definition and registration of process models

It is assumed that process models are described by a specific modelling language and registered in

accordance with the conditions specified in ISO/IEC 11179-6. Registration of the process models is

enabled using the facilities specified in ISO/IEC 19763-3, ISO/IEC 19763-10 and ISO/IEC 19763-5.

4.2 Registration of mappings between process mod
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.