ISO/TS 17573-3:2021
(Main)Electronic fee collection — System architecture for vehicle-related tolling — Part 3: Data dictionary
Electronic fee collection — System architecture for vehicle-related tolling — Part 3: Data dictionary
This document specifies the syntax and semantics of data objects in the field of electronic fee collection (EFC). The definitions of data types and assignment of values are provided in accordance with the abstract syntax notation one (ASN.1) technique, as specified in ISO/IEC 8824‑1. This document defines: — ASN.1 (data) types within the fields of EFC; — ASN.1 (data) types of a more general use that are used more specifically in standards related to EFC. This document does not seek to define ASN.1 (data) types that are primarily related to other fields that operate in conjunction with EFC, such as cooperative intelligent transport systems (C-ITS), the financial sector, etc.
Perception du télépéage — Architecture de systèmes pour le péage lié aux véhicules — Partie 3: Dictionnaire de données
General Information
Relations
Buy Standard
Standards Content (Sample)
TECHNICAL ISO/TS
SPECIFICATION 17573-3
First edition
2021-08
Electronic fee collection — System
architecture for vehicle-related
tolling —
Part 3:
Data dictionary
Perception du télépéage — Architecture de systèmes pour le péage lié
aux véhicules —
Partie 3: Dictionnaire de données
Reference number
ISO/TS 17573-3:2021(E)
©
ISO 2021
---------------------- Page: 1 ----------------------
ISO/TS 17573-3:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/TS 17573-3:2021(E)
Contents Page
Foreword .vi
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Abbreviated terms . 4
5 EFC common data object definitions . 4
5.1 General . 4
5.2 Subtypes of simple data types . 5
5.2.1 AccountStatus . 5
5.2.2 ActualNumberOfPassengers . 5
5.2.3 FutureCharacteristics . 5
5.2.4 Altitude . 6
5.2.5 CO2EmissionValue . 6
5.2.6 ContractAuthenticator . 6
5.2.7 ContractSerialNumber . 7
5.2.8 CopValue . 7
5.2.9 CountryCode . 7
5.2.10 DetectionMode . 7
5.2.11 DescriptiveCharacteristics. 8
5.2.12 EmissionUnit . 8
5.2.13 EngineCharacteristics . 8
5.2.14 EquipmentIccId .11
5.2.15 EquipmentObuId .11
5.2.16 EquipmentStatus .11
5.2.17 EuroValue .11
5.2.18 IssuerIdentifier.12
5.2.19 Latitude .12
5.2.20 DistanceUnit .12
5.2.21 LocalVehicleClassId .13
5.2.22 LocationClassId .13
5.2.23 Longitude .13
5.2.24 PaymentSecurityData .13
5.2.25 PayUnit .14
5.2.26 PersonalAccountNumber .14
5.2.27 ReceiptAuthenticator .15
5.2.28 ReceiptDistance .15
5.2.29 ResultFin .16
5.2.30 ReceiptIccId .16
5.2.31 ReceiptObuId .16
5.2.32 ResultOp .17
5.2.33 ReceiptServiceSerialNumber .19
5.2.34 ReceiptText .19
5.2.35 StationType.19
5.2.36 TariffClassId .19
5.2.37 Time .20
5.2.38 TimeClassId .20
5.2.39 TimeUnit .20
5.2.40 TrailerType .20
5.2.41 TyreConfiguration.21
5.2.42 UserClassId .21
5.2.43 VehicleAuthenticator .21
© ISO 2021 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/TS 17573-3:2021(E)
5.2.44 VehicleClass .21
5.2.45 VehicleCurrentMaxTrainWeight .22
5.2.46 VehicleTotalDistance .22
5.2.47 VehicleWeightLaden .22
5.2.48 WeekDay .22
5.3 Single level data types .23
5.3.1 AbsolutePosition2d .23
5.3.2 AbsolutePosition3d .23
5.3.3 AxleWeightLimit .23
5.3.4 AxleWeightLimits .24
5.3.5 DateCompact .24
5.3.6 DieselEmissionValues .24
5.3.7 DriverCharacteristics .25
5.3.8 Distance .25
5.3.9 Duration.25
5.3.10 EngineDetails .25
5.3.11 ExhaustEmissionValues .26
5.3.12 NumberOfAxles .26
5.3.13 ObeId .26
5.3.14 Particulate . . .27
5.3.15 PassengerCapacity.27
5.3.16 PaymentFee .27
5.3.17 Period .27
5.3.18 Provider .28
5.3.19 RelativePosition3d .28
5.3.20 SessionClass .28
5.3.21 SessionLocation .29
5.3.22 SignedValue .29
5.3.23 SoundLevel .29
5.3.24 TariffClassDescription .29
5.3.25 TimeCompact .30
5.3.26 TrailerDetails .30
5.4 Two-level data types .30
5.4.1 AxlesWeightLimits.30
5.4.2 ChargeObjectId .30
5.4.3 ContractValidity .31
5.4.4 DateAndTime .31
5.4.5 EnvironmentalCharacteristics .31
5.4.6 Lpn .32
5.4.7 PaymentMeans .32
5.4.8 PaymentMeansBalance .33
5.4.9 Point .33
5.4.10 PurseBalance .33
5.4.11 TrailerCharacteristics .33
5.4.12 ValidityOfContract .34
5.4.13 VehicleAxlesNumber .34
5.4.14 VehicleDimensions .34
5.4.15 VehicleWeightLimits .35
5.5 Three-level data types .35
5.5.1 EfcContextMark.35
5.5.2 ReceiptContract .35
5.5.3 ReceiptData .36
5.5.4 ReceiptFinancialPart .37
5.5.5 ReceiptServicePart .37
5.5.6 UserId .37
5.5.7 VehicleAxles .38
5.5.8 VehicleSpecificCharacteristics .38
5.6 Complex data types .38
iv © ISO 2021 – All rights reserved
---------------------- Page: 4 ----------------------
ISO/TS 17573-3:2021(E)
5.6.1 AggregatedSingleTariffClassSession .38
5.6.2 DetectedChargeObject.39
5.6.3 VehicleDescription .40
Annex A (normative) EFC Common data type definitions .42
Bibliography .43
© ISO 2021 – All rights reserved v
---------------------- Page: 5 ----------------------
ISO/TS 17573-3:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 204, Intelligent transport systems, in
collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/
TC 278, Intelligent transport systems, in accordance with the Agreement on technical cooperation
between ISO and CEN (Vienna Agreement).
A list of all parts in the ISO 17573 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
vi © ISO 2021 – All rights reserved
---------------------- Page: 6 ----------------------
ISO/TS 17573-3:2021(E)
Introduction
This document is a part of the ISO 17573 series that defines the system architecture for vehicle-related
tolling. ISO 17573-1 gives a reference model for the system architecture. ISO/TS 17573-2 provides a
collection of terms and definitions within the field of electronic fee collection (EFC) and road user
charging that are used in the different documents published in ISO and CEN under the general title,
Electronic fee collection.
This document (ISO/TS 17573-3) provides a data dictionary that contains the definitions of ASN.1
(data) types and the associated semantics.
The document is intended to be used as a reference by editors of ISO and CEN documents in EFC and in
related areas of standardization (such as Intelligent Transport Systems, ITS).
It is foreseen that the library of ASN.1 (data) types contained in this document will be augmented with
additional definitions as these become available.
© ISO 2021 – All rights reserved vii
---------------------- Page: 7 ----------------------
TECHNICAL SPECIFICATION ISO/TS 17573-3:2021(E)
Electronic fee collection — System architecture for vehicle-
related tolling —
Part 3:
Data dictionary
1 Scope
This document specifies the syntax and semantics of data objects in the field of electronic fee collection
(EFC). The definitions of data types and assignment of values are provided in accordance with the
abstract syntax notation one (ASN.1) technique, as specified in ISO/IEC 8824-1. This document defines:
— ASN.1 (data) types within the fields of EFC;
— ASN.1 (data) types of a more general use that are used more specifically in standards related to EFC.
This document does not seek to define ASN.1 (data) types that are primarily related to other fields
that operate in conjunction with EFC, such as cooperative intelligent transport systems (C-ITS), the
financial sector, etc.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 612, Road vehicles — Dimensions of motor vehicles and towed vehicles — Terms and definitions
ISO 3166-1, Codes for the representation of names of countries and their subdivisions — Part 1: Country
code
ISO 4217, Codes for the representation of currencies
ISO 1176, Road vehicles — Masses — Vocabulary and codes
ISO/IEC 7812-1, Identification cards — Identification of issuers — Part 1: Numbering system
ISO/IEC 8824-1, Information technology — Abstract Syntax Notation One (ASN.1) — Part 1: Specification
of basic notation
ISO/IEC 8859-1, Information technology — 8-bit single-byte coded graphic character sets — Part 1: Latin
alphabet No. 1
ISO/IEC 8859-2, Information technology — 8-bit single-byte coded graphic character sets — Part 2: Latin
alphabet No. 2
ISO/IEC 8859-3, Information technology — 8-bit single-byte coded graphic character sets — Part 3: Latin
alphabet No. 3
ISO/IEC 8859-4, Information technology — 8-bit single-byte coded graphic character sets — Part 4: Latin
alphabet No. 4
ISO/IEC 8859-5, Information technology — 8-bit single-byte coded graphic character sets — Part 5: Latin/
Cyrillic alphabet
© ISO 2021 – All rights reserved 1
---------------------- Page: 8 ----------------------
ISO/TS 17573-3:2021(E)
ISO/IEC 8859-6, Information technology — 8-bit single-byte coded graphic character sets — Part 6: Latin/
Arabic alphabet
ISO/IEC 8859-7, Information technology — 8-bit single-byte coded graphic character sets — Part 7: Latin/
Greek alphabet
ISO/IEC 8859-8, Information technology — 8-bit single-byte coded graphic character sets — Part 8: Latin/
Hebrew alphabet
ISO/IEC 8859-9, Information technology — 8-bit single-byte coded graphic character sets — Part 9: Latin
alphabet No. 5
ISO/IEC 8859-10, Information technology — 8-bit single-byte coded graphic character sets — Part 10:
Latin alphabet No. 6
ISO 14816, Road transport and traffic telematics — Automatic vehicle and equipment identification —
Numbering and data structure
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO/TS 17573-2 and the following
apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform:
...
TECHNICAL ISO/TS
SPECIFICATION 17573-3
First edition
Electronic fee collection — System
architecture for vehicle-related
tolling —
Part 3:
Data dictionary
Perception du télépéage — Architecture de systèmes pour le péage lié
aux véhicules —
Partie 3: Dictionnaire de données
PROOF/ÉPREUVE
Reference number
ISO/TS 17573-3:2021(E)
©
ISO 2021
---------------------- Page: 1 ----------------------
ISO/TS 17573-3:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii PROOF/ÉPREUVE © ISO 2021 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/TS 17573-3:2021(E)
Contents Page
Foreword .vi
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Abbreviated terms . 4
5 EFC common data object definitions . 4
5.1 General . 4
5.2 Subtypes of simple data types . 5
5.2.1 AccountStatus . 5
5.2.2 ActualNumberOfPassengers . 5
5.2.3 FutureCharacteristics . 5
5.2.4 Altitude . 6
5.2.5 CO2EmissionValue . 6
5.2.6 ContractAuthenticator . 6
5.2.7 ContractSerialNumber . 7
5.2.8 CopValue . 7
5.2.9 CountryCode . 7
5.2.10 DetectionMode . 7
5.2.11 DescriptiveCharacteristics. 8
5.2.12 EmissionUnit . 8
5.2.13 EngineCharacteristics . 8
5.2.14 EquipmentIccId .11
5.2.15 EquipmentObuId .11
5.2.16 EquipmentStatus .11
5.2.17 EuroValue .11
5.2.18 IssuerIdentifier.12
5.2.19 Latitude .12
5.2.20 DistanceUnit .12
5.2.21 LocalVehicleClassId .13
5.2.22 LocationClassId .13
5.2.23 Longitude .13
5.2.24 PaymentSecurityData .13
5.2.25 PayUnit .14
5.2.26 PersonalAccountNumber .14
5.2.27 ReceiptAuthenticator .15
5.2.28 ReceiptDistance .15
5.2.29 ResultFin .16
5.2.30 ReceiptIccId .16
5.2.31 ReceiptObuId .16
5.2.32 ResultOp .17
5.2.33 ReceiptServiceSerialNumber .19
5.2.34 ReceiptText .19
5.2.35 StationType.19
5.2.36 TariffClassId .19
5.2.37 Time .20
5.2.38 TimeClassId .20
5.2.39 TimeUnit .20
5.2.40 TrailerType .20
5.2.41 TyreConfiguration.21
5.2.42 UserClassId .21
5.2.43 VehicleAuthenticator .21
© ISO 2021 – All rights reserved PROOF/ÉPREUVE iii
---------------------- Page: 3 ----------------------
ISO/TS 17573-3:2021(E)
5.2.44 VehicleClass .21
5.2.45 VehicleCurrentMaxTrainWeight .22
5.2.46 VehicleTotalDistance .22
5.2.47 VehicleWeightLaden .22
5.2.48 WeekDay .22
5.3 Single level data types .23
5.3.1 AbsolutePosition2d .23
5.3.2 AbsolutePosition3d .23
5.3.3 AxleWeightLimit .23
5.3.4 AxleWeightLimits .24
5.3.5 DateCompact .24
5.3.6 DieselEmissionValues .24
5.3.7 DriverCharacteristics .25
5.3.8 Distance .25
5.3.9 Duration.25
5.3.10 EngineDetails .25
5.3.11 ExhaustEmissionValues .26
5.3.12 NumberOfAxles .26
5.3.13 ObeId .26
5.3.14 Particulate . . .27
5.3.15 PassengerCapacity.27
5.3.16 PaymentFee .27
5.3.17 Period .27
5.3.18 Provider .28
5.3.19 RelativePosition3d .28
5.3.20 SessionClass .28
5.3.21 SessionLocation .29
5.3.22 SignedValue .29
5.3.23 SoundLevel .29
5.3.24 TariffClassDescription .29
5.3.25 TimeCompact .30
5.3.26 TrailerDetails .30
5.4 Two-level data types .30
5.4.1 AxlesWeightLimits.30
5.4.2 ChargeObjectId .30
5.4.3 ContractValidity .31
5.4.4 DateAndTime .31
5.4.5 EnvironmentalCharacteristics .31
5.4.6 Lpn .31
5.4.7 PaymentMeans .32
5.4.8 PaymentMeansBalance .32
5.4.9 Point .33
5.4.10 PurseBalance .33
5.4.11 TrailerCharacteristics .33
5.4.12 ValidityOfContract .33
5.4.13 VehicleAxlesNumber .34
5.4.14 VehicleDimensions .34
5.4.15 VehicleWeightLimits .34
5.5 Three-level data types .35
5.5.1 EfcContextMark.35
5.5.2 ReceiptContract .35
5.5.3 ReceiptData .35
5.5.4 ReceiptFinancialPart .36
5.5.5 ReceiptServicePart .37
5.5.6 UserId .37
5.5.7 VehicleAxles .37
5.5.8 VehicleSpecificCharacteristics .38
5.6 Complex data types .38
iv PROOF/ÉPREUVE © ISO 2021 – All rights reserved
---------------------- Page: 4 ----------------------
ISO/TS 17573-3:2021(E)
5.6.1 AggregatedSingleTariffClassSession .38
5.6.2 DetectedChargeObject.39
5.6.3 VehicleDescription .40
Annex A (normative) EFC Common data type definitions .42
Bibliography .43
© ISO 2021 – All rights reserved PROOF/ÉPREUVE v
---------------------- Page: 5 ----------------------
ISO/TS 17573-3:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 204, Intelligent transport systems, in
collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/
TC 278, Intelligent transport systems, in accordance with the Agreement on technical cooperation
between ISO and CEN (Vienna Agreement).
A list of all parts in the ISO 17573 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
vi PROOF/ÉPREUVE © ISO 2021 – All rights reserved
---------------------- Page: 6 ----------------------
ISO/TS 17573-3:2021(E)
Introduction
This document is a part of the ISO 17573 series that defines the system architecture for vehicle-related
tolling. Part 1 gives a reference model for the system architecture. Part 2 provides a collection of terms
and definitions within the field of electronic fee collection (EFC) and road user charging that are used
in the different documents published in ISO and CEN under the general title, Electronic fee collection.
This document (ISO 17573-3) provides a data dictionary that contains the definitions of ASN.1 (data)
types and the associated semantics.
The document is intended to be used as a reference by editors of ISO and CEN documents in EFC and in
related areas of standardization (such as Intelligent Transport Systems, ITS).
It is foreseen that the library of ASN.1 (data) types contained in this document will be augmented with
additional definitions as these become available.
© ISO 2021 – All rights reserved PROOF/ÉPREUVE vii
---------------------- Page: 7 ----------------------
TECHNICAL SPECIFICATION ISO/TS 17573-3:2021(E)
Electronic fee collection — System architecture for vehicle-
related tolling —
Part 3:
Data dictionary
1 Scope
This document specifies the syntax and semantics of data objects in the field of electronic fee collection
(EFC). The definitions of data types and assignment of values are provided in accordance with the
abstract syntax notation one (ASN.1) technique, as specified in ISO/IEC 8824-1. This document defines:
— ASN.1 (data) types within the fields of EFC;
— ASN.1 (data) types of a more general use that are used more specifically in standards related to EFC.
This document does not seek to define ASN.1 (data) types that are primarily related to other fields
that operate in conjunction with EFC, such as cooperative intelligent transport systems (C-ITS), the
financial sector, etc.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 612, Road vehicles — Dimensions of motor vehicles and towed vehicles — Terms and definitions
ISO 3166-1, Codes for the representation of names of countries and their subdivisions — Part 1: Country
code
ISO 4217, Codes for the representation of currencies
ISO 1176, Road vehicles — Masses — Vocabulary and codes
ISO/IEC 7812-1, Identification cards — Identification of issuers — Part 1: Numbering system
ISO/IEC 8824-1, Information technology — Abstract Syntax Notation One (ASN.1) — Part 1: Specification
of basic notation
ISO/IEC 8859-1, Information technology — 8-bit single-byte coded graphic character sets — Part 1: Latin
alphabet No. 1
ISO/IEC 8859-2, Information technology — 8-bit single-byte coded graphic character sets — Part 2: Latin
alphabet No. 2
ISO/IEC 8859-3, Information technology — 8-bit single-byte coded graphic character sets — Part 3: Latin
alphabet No. 3
ISO/IEC 8859-4, Information technology — 8-bit single-byte coded graphic character sets — Part 4: Latin
alphabet No. 4
ISO/IEC 8859-5, Information technology — 8-bit single-byte coded graphic character sets — Part 5: Latin/
Cyrillic alphabet
© ISO 2021 – All rights reserved PROOF/ÉPREUVE 1
---------------------- Page: 8 ----------------------
ISO/TS 17573-3:2021(E)
ISO/IEC 8859-6, Information technology — 8-bit single-byte coded graphic character sets — Part 6: Latin/
Arabic alphabet
ISO/IEC 8859-7, Information technology — 8-bit single-byte coded graphic character sets — Part 7: Latin/
Greek alphabet
ISO/IEC 8859-8, Information technology — 8-bit single-byte coded graphic character sets — Part 8: Latin/
Hebrew alphabet
ISO/IEC 8859-9, Information technology — 8-bit single-byte coded graphic character sets — Part 9: Latin
alphabet No. 5
ISO/IEC 8859-10, Information technology — 8-bit single-byte coded graphic character sets — Part 10:
Latin alphabet No. 6
ISO 14816, Road transport and traffic telematics — Automatic vehicle and equipment identification —
Numbering and data structure
3 Terms and definitions
For the purposes of this document, the terms and definitions given in in ISO/TS 17573-2 and the
following apply.
ISO and IEC maintain terminological databases for
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.