Abstract

This standard specifies the requirements for the training of citizen science divers. The standard shall have a broad scope so as to be applicable to all disciplines of science. This document is applicable to all recreational divers independent of any scientific background (unlike the ISO 8804 standard series which a primarily directed at the scientific diving community). A citizen science diver is competent in basic underwater scientific methodologies and protocols and shall be able to assist in scientific diving activities. This standard will specify competencies, prerequisites for training, Introductory information, Required theoretical knowledge, Required practical skills, Practical training parameters and Evaluation criteria for training systems aimed at training citizen science divers.

Status
Not Published
Current Stage
6000 - International Standard under publication
Start Date
03-Nov-2026
Completion Date
07-Nov-2026

Buy Documents

Draft

ISO/PRF 25325 - Requirements for the training of citizen science divers

Release Date:06-Oct-2026
English language (8 pages)
sale 15% off
sale 15% off
Draft

REDLINE ISO/PRF 25325 - Requirements for the training of citizen science divers

Release Date:06-Oct-2026
English language (8 pages)
sale 15% off
sale 15% off

ISO 25325 is an ISO standard for the training of citizen science divers. It sets minimum requirements for the knowledge, skills, prerequisites, training delivery and qualification criteria needed for recreational divers to assist in scientific diving projects.

The standard is aimed at recreational divers with no scientific background, as well as the training providers, instructors and scientists who work with them. It gives a common baseline for citizen science diving training so divers can support data collection and other project tasks within the limits of their qualification.

What does ISO 25325 specify?

ISO 25325 specifies minimum requirements for the training of citizen science divers who assist in scientific diving projects. It also sets evaluation criteria for those competencies and requirements for how the training is provided, alongside the general requirements for recreational diving service provision in ISO 24803.

The document is organized into clauses 1 to 10, followed by a bibliography:

  • Clause 1 - Scope
  • Clause 2 - Normative references
  • Clause 3 - Terms and definitions
  • Clause 4 - Competencies
  • Clause 5 - Prerequisites for training
  • Clause 6 - Introductory information
  • Clause 7 - Theoretical knowledge
  • Clause 8 - Practical scientific diving skills
  • Clause 9 - Requirements for the provision of training
  • Clause 10 - Qualification criteria

What are the key requirements of ISO 25325?

Competence and entry conditions

ISO 25325 requires trainees to be trained and evaluated so they can assist in scientific diving activities with appropriate knowledge, skills and experience. In practice, that means the training is not only about diving ability, but also about handling basic scientific tasks underwater.

Clause 5 sets the prerequisites for joining the training. The training provider must check that trainees are medically screened for diving, that minors have parental or legal guardian consent, and that the trainee already holds the qualification specified in ISO 24801-2. This matters because the course builds on existing autonomous diving competence rather than teaching basic scuba from the beginning.

Clause 6 requires introductory information to be given before or during the first session, including the limits of the trainee’s training and qualification. That helps set expectations about what a citizen science diver may and may not do on a project.

Theoretical knowledge

Clause 7 requires knowledge of scientific methodologies and protocols, including ethics, sustainable practices in scientific diving, underwater work on scientific projects, accurate data collection and common data errors. It also covers safety issues such as workload and attention to equipment, buddy and environment.

The same clause requires knowledge of generic methods such as site selection and marking, measuring, underwater photo and video use, lifting bags, visual and photographic census, sampling and recording, aquatic life identification, debris removal and result recording. It also includes survey techniques such as transects, grids, quadrats, mapping, photogrammetry, geolocation and georeferencing. In practice, trainees need to understand the tools and methods they will actually use to collect useful data.

Clause 7 also requires knowledge of diving environments and conditions such as altitude, limited visibility, ice, water temperature, remote locations, overhead environments, polluted water and salinity. This knowledge includes hazard identification, risk assessment and the limits of the diver’s qualifications and abilities.

Practical skills and assessment

Clause 8 requires practical scientific diving skills to be demonstrated in at least three dives in an actual or simulated scientific project, using at least two scientific tasks. Examples include recording flora or fauna, ecosystem restoration, video or photographic sampling, underwater photogrammetry, debris analysis, long-term site monitoring and survey techniques.

Clause 10 requires the trainee to demonstrate knowledge of how to assist in scientific projects and to meet the skill requirements of Clause 8. To qualify, the trainee must also complete at least three open water dives as part of one or more real or simulated scientific projects.

How training must be delivered

Clause 9 requires instruction in scientific knowledge and skills to be provided by specialists in citizen science diving. That can mean an ISO 24802-2 qualified instructor with additional documented experience, or a professionally qualified scientist with documented scientific diving experience under direct supervision by an ISO 24802-2 qualified instructor during in-water activities.

The same clause requires a site- and task-specific risk assessment before each in-water activity, plus emergency equipment, a documented emergency plan and direct supervision of underwater training. It also requires dives to be cancelled or aborted if environmental conditions, equipment problems or the trainee’s condition make that necessary.

What terms does ISO 25325 define?

  • Scientific diving - diving performed as part of a scientific, research or educational activity.
  • Citizen science diving - voluntary participation in scientific research by divers who are typically not trained scientists.
  • Citizen science diver - a diver competent to assist in scientific diving.
  • Direct supervision - supervision by a scuba instructor or a dive leader positioned to intervene rapidly on behalf of the diver.
  • Global navigation satellite systems (GNSS) - satellite-based positioning used at the surface to support navigation and orientation during scientific projects.

Who uses ISO 25325?

ISO 25325 is used by recreational diving service providers, citizen science diving instructors, scientists running field projects and dive leaders supervising divers. It is also relevant to organizations that want to train recreational divers to collect data, follow scientific protocols and work safely in underwater projects.

The standard is useful where diving services and scientific work overlap, especially when project leaders need a shared baseline for trainee competence, risk control and assessment.

Which standards are used with ISO 25325?

StandardWhat it contributes
ISO 21416Sustainable practices in recreational diving, including aquatic ecosystem restoration.
ISO 24801-2The prerequisite diving qualification for trainees entering this training.
ISO 24802-2The instructor qualification referenced for teaching and direct supervision.
ISO 24803:2017General requirements for recreational diving providers and the introductory information to be given to trainees.
ISO 8804-1:2024The definition of scientific diving used in Clause 3 and the wider scientific-diver context.

What does the ISO 25325 document contain?

ISO 25325 is a clause-based training specification rather than a procedural manual. It contains the competence profile, entry prerequisites, theory topics, practical skill tasks, provider responsibilities and qualification criteria for citizen science divers.

Clause 7 gives the subject areas trainees must understand, including scientific methods, environments and navigation. Clause 8 gives the underwater tasks and safe-diving behaviours that must be demonstrated. Clause 9 sets the training environment, instructor qualifications, risk assessment and emergency arrangements, while Clause 10 sets the final knowledge and skills checks used to qualify the trainee.

Relations

Effective Date
12-Feb-2026

Buy Documents

Draft

ISO/PRF 25325 - Requirements for the training of citizen science divers

Release Date:06-Oct-2026
English language (8 pages)
sale 15% off
sale 15% off
Draft

REDLINE ISO/PRF 25325 - Requirements for the training of citizen science divers

Release Date:06-Oct-2026
English language (8 pages)
sale 15% off
sale 15% off

Get Certified

Connect with accredited certification bodies for this standard

BSI Group

BSI (British Standards Institution) is the business standards company that helps organizations make excellence a habit.

UKAS United Kingdom Verified

Bureau Veritas

Bureau Veritas is a world leader in laboratory testing, inspection and certification services.

COFRAC France Verified

DNV

DNV is an independent assurance and risk management provider.

NA Norway Verified

Sponsored listings

Frequently Asked Questions

ISO 25325 is a draft published by the International Organization for Standardization (ISO). Its full title is "Requirements for the training of citizen science divers". This standard covers: This standard specifies the requirements for the training of citizen science divers. The standard shall have a broad scope so as to be applicable to all disciplines of science. This document is applicable to all recreational divers independent of any scientific background (unlike the ISO 8804 standard series which a primarily directed at the scientific diving community). A citizen science diver is competent in basic underwater scientific methodologies and protocols and shall be able to assist in scientific diving activities. This standard will specify competencies, prerequisites for training, Introductory information, Required theoretical knowledge, Required practical skills, Practical training parameters and Evaluation criteria for training systems aimed at training citizen science divers.

This standard specifies the requirements for the training of citizen science divers. The standard shall have a broad scope so as to be applicable to all disciplines of science. This document is applicable to all recreational divers independent of any scientific background (unlike the ISO 8804 standard series which a primarily directed at the scientific diving community). A citizen science diver is competent in basic underwater scientific methodologies and protocols and shall be able to assist in scientific diving activities. This standard will specify competencies, prerequisites for training, Introductory information, Required theoretical knowledge, Required practical skills, Practical training parameters and Evaluation criteria for training systems aimed at training citizen science divers.

ISO 25325 is classified under the following ICS (International Classification for Standards) categories: 03.100.30 - Management of human resources. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO 25325 has the following relationships with other standards: It is inter standard links to prEN ISO 25325. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

ISO 25325 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


International
Standard
First edition
Requirements for the training of
citizen science divers
Exigences relatives à la formation des plongeurs scientifiques
citoyens
PROOF/ÉPREUVE
Reference number
© ISO 2026
All rights reserved.
This ISO publication is protected by copyright and is owned by ISO and/or its licensors.
The content of this ISO publication is provided under licence, not sold. Use is subject to the applicable licence terms issued by ISO,
an ISO member body, or an authorized third-party distributor.
Except as required for implementation or expressly permitted by a separate licence, no part of this ISO publication may be
reproduced, distributed, modified, used, or made available in any form or by any means – electronic or mechanical, including
photocopying, scanning, recording, or posting on internal or external digital platforms.
Any use beyond the scope of the granted rights is prohibited and may result in legal action.
ISO copyright office
CP 401 • CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
PROOF/ÉPREUVE
ii
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Competencies . 2
5 Prerequisites for training . 2
5.1 General .2
5.2 Minors and vulnerable persons .2
5.3 Health requirements .2
5.4 Diving competencies .2
6 Introductory information . 2
7 Theoretical knowledge . 3
7.1 Scientific methodologies and protocols .3
7.1.1 General .3
7.1.2 Generic methods .3
7.1.3 Survey techniques .3
7.2 Diving environments and conditions .4
7.3 Navigation and orientation during scientific projects .4
7.4 Physiological, psychological and behavioural studies .4
8 Practical scientific diving skills . 4
9 Requirements for the provision of training . 5
9.1 Instructors .5
9.2 Risk assessment .5
9.3 Emergency equipment and procedures.6
9.3.1 Emergency equipment .6
9.3.2 Emergency procedures .6
9.4 Practical training parameters .6
10 Qualification criteria . . 7
10.1 Knowledge .7
10.2 Skills . .7
Bibliography . 8
PROOF/ÉPREUVE
iii
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 228, Tourism and related services, in
collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC 329,
Tourism services, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna
Agreement).
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
PROOF/ÉPREUVE
iv
Introduction
This document is aimed primarily at recreational divers wishing to become citizen science divers and
sets minimum requirements for their training. It is intended to benefit both the organizations involved in
training citizen science divers and the scientific diving community as a whole.
This document is considered the minimum competency standard for recognition as a citizen science diver.
It is intended to provide agreed-upon minimum training requirements, thereby easing barriers to cross-
programme co-operation and reciprocity by acknowledging a common basic skill set for citizen science
divers. This document also provides requirements for scientists wishing to involve such divers in scientific
projects, concerning the capabilities and limitations of individuals trained according to this document.
Divers trained according to this document can take part in projects under the supervision of a project leader,
or independently while following proper safety and data collection protocols.
PROOF/ÉPREUVE
v
International Standard ISO 25325:2026(en)
Requirements for the training of citizen science divers
1 Scope
This document specifies minimum requirements for the training of citizen science divers to assist in
conducting scientific diving projects.
This document specifies evaluation criteria for these competencies.
This document specifies the requirements under which training is provided, in addition to the general
requirements for recreational diving service provision in accordance with ISO 24803.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
ISO 21416, Recreational diving services — Requirements and guidance on environmentally sustainable practices
in recreational diving
ISO 24801-2, Recreational diving services — Requirements for the training of recreational scuba divers — Part
2: Level 2 — Autonomous diver
ISO 24802-2, Recreational diving services — Requirements for the training of scuba instructors — Part 2: Level
ISO 24803:2017, Recreational diving services — Requirements for recreational diving providers
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
3.1
scientific diving
diving performed as part of a scientific, research or educational activity
[SOURCE: ISO 8804-1:2024, 3.1]
3.2
citizen science diving
participation in scientific research conducted voluntarily by divers who are typically not trained scientists
3.3
citizen scienc
...


ISO/DISPRF 25325:2025(en)
ISO/TC 228
Secretariat: UNE
Date: 2026-07-1510-05
Requirements for the training of citizen science divers
This draft is submitted to a parallel vote in ISO, CEN.

© Exigences relatives à la formation des plongeurs scientifiques citoyens
PROOF
This draft is submitted to a parallel vote in ISO, CEN.

ISO/DISPRF 25325:20252026(en)
All rights reserved. Unless otherwise specified,
This ISO publication is protected by copyright and is owned by ISO and/or its licensors.
The content of this ISO publication is provided under licence, not sold. Use is subject to the applicable licence terms issued
by ISO, an ISO member body, or an authorized third-party distributor.
Except as required in the context of its for implementation or expressly permitted by a separate licence, no part of this
ISO publication may be reproduced or utilized otherwise, distributed, modified, used, or made available in any form or
by any means, – electronic or mechanical, including photocopying, scanning, recording, or posting on internal or external
digital platforms.
Any use beyond the internet or an intranet, without prior written permission. Permission can be requested from either
ISO at the address below or ISO’s member body in the countryscope of the requestergranted rights is prohibited and may
result in legal action.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
iii
ISO/DISPRF 25325:2025(E2026(en)
Contents
Foreword . v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Competencies . 2
5 Prerequisites for training . 2
5.1 General. 2
5.2 Minors and vulnerable persons . 2
5.3 Health requirements . 2
5.4 Diving competencies . 2
6 Introductory information . 3
7 Theoretical knowledge . 3
7.1 Scientific methodologies and protocols . 3
7.2 Diving environments and conditions . 4
7.3 Navigation and orientation during scientific projects . 4
7.4 Physiological, psychological and behavioural studies . 5
8 Practical scientific diving skills . 5
9 Requirements for the provision of training . 6
9.1 Instructors . 6
9.2 Risk assessment . 6
9.3 Emergency equipment and procedures . 6
9.4 Practical training parameters . 7
10 Qualification criteria . 8
10.1 Knowledge . 8
10.2 Skills . 8
Bibliography . 9

iv
ISO/DISPRF 25325:20252026(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of
ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights
in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s)
which may be required to implement this document. However, implementers are cautioned that this may not
represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 228, Tourism and related services, in
collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC 329,
Tourism services, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna
Agreement).
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

v
ISO/DISPRF 25325:2025(E2026(en)
Introduction
This document is aimed primarily at recreational divers wishing to become citizen science divers and sets
minimum requirements for their training. It is intended to benefit both tothe organizations involved in
training citizen science divers and the scientific diving community as a whole.
This document is considered the minimum competency standard for recognition as a citizen science diver. It
is intended to provide requirements regarding agreed-upon minimum training requirements, thereby easing
barriers to cross-programme co-operation and reciprocity by acknowledging a common basic skill set for
citizen science divers. This document also provides requirements tofor scientists wishing to involve such
divers in scientific projects, concerning the capabilities and limitations of individuals trained according to this
document.
Divers trained according to this document can take part in projects under the supervision of a project leader,
or independently while following proper safety and data collection protocols.
vi
DRAFT International Standard ISO/DIS 25325:2025(en)

Requirements for the training of citizen science divers
1 Scope
This document specifies minimum requirements for the training of citizen science divers to assist in
conducting scientific diving projects.
This document specifies evaluation criteria for these competencies.
This document specifies the requirements under which training is provided, in addition to the general
requirements for recreational diving service provision in accordance with ISO 24803.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
ISO 21416, Recreational diving services — Requirements and guidance on environmentally sustainable practices
in recreational diving
ISO 24801--2, Recreational diving services — Requirements for the training of recreational scuba divers — Part
2: Level 2 — Autonomous diver
ISO 24802--2, Recreational diving services — Requirements for the training of scuba instructors — Part 2: Level
ISO 24803:2017, Recreational diving services — Requirements for recreational diving providers
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— — ISO Online browsing platform: available at https://www.iso.org/obp
— — IEC Electropedia: available at https://www.electropedia.org/
3.1 3.1
scientific diving
diving performed as part of a scientific, research or educational activity
[SOURCE: ISO 8804-1:2024, 3.1]
3.2 3.2
citizen science diving
participation in scientific research conducted voluntarily by divers who are typically not trained scientists
ISO/DISPRF 25325:2025(E2026(en)
3.3 3.3
citizen science diver
diver competent to assist in scientific diving (3.1(3.1))
3.4 3.4
direct supervision
supervision by a scuba instructor or a dive leader of a group of divers in a position allowing rapid intervention
on behalf of the diver
4 Competencies
Citizen science divers shall be trained such that when evaluated in accordance with Clause 8Clause 8 they are
deemed to have sufficient knowledge, skills and experience with regard to diving as well as basic underwater
scientific methodologies and protocols to assist in scientific diving activities.
Citizen science divers trained in accordance with this document are competent to:
— — collect data for scientific projects that typically have been designed by or are overseen by scientists;
— — participate in scientific diving activities within the limits of their diving qualification.
5 Prerequisites for training
5.1 General
The training provider shall ensure that the trainee fulfils the following prerequisites (see 5.2specified in 5.2
to
...