iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 28340:2013

(Main)

Combined coatings on aluminium — General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium

Combined coatings on aluminium — General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium

ISO 28340:2013 gives specifications for the combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium used for architecture. It specifies the characteristic properties of combined coatings on aluminium, outlines the test methods for checking these characteristic properties and specifies their required performance.

Revêtements combinés sur aluminium — Spécifications générales pour les revêtements combinés appliqués sur l'aluminium composés d'un revêtement organique obtenu par électrophorèse appliqué sur un revêtement obtenu par anodisation

General Information

Status
Published
Publication Date
20-Feb-2013
ICS
25.220.20 - Surface treatment
Technical Committee
ISO/TC 79/SC 2 - Organic and anodic oxidation coatings on aluminium
Drafting Committee
ISO/TC 79/SC 2/WG 17 - Organic coatings and combined coatings on aluminium
Current Stage
9093 - International Standard confirmed
Completion Date
13-May-2024
Ref Project

Buy Standard

ISO 28340:2013 - Combined coatings on aluminium -- General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminiumISO 28340:2013 - Combined coatings on aluminium -- General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium
PreviousNext
Standard
ISO 28340:2013 - Combined coatings on aluminium -- General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium
English language
17 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 28340
First edition
2013-02-15
Combined coatings on aluminium —
General specifications for combined
coatings of electrophoretic organic
coatings and anodic oxidation
coatings on aluminium
Revêtements combinés sur aluminium — Spécifications générales
pour les revêtements combinés appliqués sur l’aluminium composés
d’un revêtement organique obtenu par électrophorèse appliqué sur
un revêtement obtenu par anodisation
Reference number
ISO 28340:2013(E)
©
ISO 2013

---------------------- Page: 1 ----------------------
ISO 28340:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 28340:2013(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Classes . 2
5 Quality . 3
5.1 General . 3
5.2 Appearance . 3
5.3 Colour . 3
5.4 Gloss . 3
5.5 Thickness of anodic oxidation coating . 3
5.6 Corrosion resistance . 3
5.7 Resistance to accelerated weathering . . 4
5.8 Resistance to cyclic corrosion/UV light . 4
5.9 Outdoor exposure . 4
5.10 Hardness of the organic coating . 4
5.11 Adhesion of the organic coating . 4
5.12 Solvent resistance of the organic coating . 4
5.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 7668:2021(Main)
Anodizing of aluminium and its alloys — Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60° or 85°

This document specifies methods for the measurement of specular reflectance and specular gloss of flat samples of anodized aluminium using geometries of 20° (Method A), 45° (Method B), 60° (Method C) and 85° (Method D) and of specular reflectance by an additional 45° method (Method E) employing a narrow acceptance angle. The methods described are intended mainly for use with clear anodized surfaces. They can be used with colour-anodized aluminium, but only with similar colours.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    14 pages
    French language
    sale 15% off
ISO
ISO 10074:2021(Main)
Anodizing of aluminium and its alloys — Specification for hard anodic oxidation coatings on aluminium and its alloys

This document specifies requirements for hard anodic oxidation coatings on aluminium and its alloys, including test methods. It also specifies the information to be supplied by the customer to the anodizer (see Annex A). It is not applicable to coatings produced by processes such as those referred to as plasma electrolytic oxidation, micro-arc oxidation, plasma-chemical anodic oxidation, anodic spark deposition or spark anodizing.

  • Standard
    18 pages
    English language
    sale 15% off
ISO
ISO 23052:2020(Main)
Anodizing of aluminium and its alloys — Test method for chemical resistance of anodic oxidation coatings on aluminium and its alloys using electromotive force apparatus

This document specifies a test method using electromotive force test apparatus for assessing the chemical resistance of anodic oxidation coatings on aluminium and its alloys.

  • Standard
    10 pages
    English language
    sale 15% off
ISO
ISO 2106:2019(Main)
Anodizing of aluminium and its alloys — Determination of mass per unit area (surface density) of anodic oxidation coatings — Gravimetric method

This document specifies a gravimetric method for determining the mass per unit area (surface density) of anodic oxidation coatings on aluminium and its alloys. The method is applicable to all oxidation coatings formed by anodizing aluminium and its alloys, either cast or wrought, and is suitable for most aluminium alloys, except those in which the mass fraction of copper is greater than 6 %. NOTE 1 A high content of copper in the alloy can lead to increased dissolution of the substrate aluminium. NOTE 2 If the thickness is known with sufficient precision (for example, using the method specified in ISO 2128), the determination of the mass per unit area (surface density) of the coatings will enable its apparent density to be calculated. Conversely, if the conditions of application of the coating and its density are known, the determination of its mass per unit area (surface density) can permit the calculation of the average mass and an approximate evaluation of the thickness (see Clause 9).

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    French language
    sale 15% off
ISO
ISO 2376:2019(Main)
Anodizing of aluminium and its alloys — Determination of breakdown voltage and withstand voltage

This document specifies test methods for the determination of the breakdown voltage and withstand voltage of anodic oxidation coatings on aluminium and its alloys, on flat or near-flat surfaces and on round wire. The methods are applicable to anodic oxidation coatings used primarily as electrical insulators. The methods are not applicable to coatings in the vicinity of cut edges, the edges of holes, or sharp changes of angle on, for example, extruded shapes. NOTE 1 Breakdown voltage and withstand voltage are affected by relative humidity. NOTE 2 The methods described do not give satisfactory results for unsealed coatings because they are affected by the humidity in particular.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
ISO
ISO 18771:2019(Main)
Anodizing of aluminium and its alloys — Method to test the surface abrasion resistance using glass-coated abrasive paper

This document specifies a method for the determination of the surface abrasion resistance of anodic oxidation coatings produced by sulfuric acid anodizing of aluminium and its alloys. It is mainly intended for the evaluation of external architectural coatings. It is a production control method that relies to a large extent on operator experience and instruction.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    8 pages
    French language
    sale 15% off
ISO
ISO 3211:2018(Main)
Anodizing of aluminium and its alloys — Assessment of resistance of anodic oxidation coatings to cracking by deformation

This document specifies an empirical method for assessing the resistance of anodic oxidation coatings to cracking by deformation. The method is applicable particularly to sheet material with anodic oxidation coatings of thickness less than 5 µm, and is useful for development purposes. NOTE If the test specimen is thick, more than 5 µm of coating can be measured (see Clause 9).

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
ISO
ISO 8994:2018(Main)
Anodizing of aluminium and its alloys — Rating system for the evaluation of pitting corrosion — Grid method

This document specifies a grid rating system that provides a means of defining levels of performance of anodic oxidation coatings on aluminium and its alloys that have been subjected to corrosion tests. This rating system is applicable to pitting corrosion resulting from — accelerated tests, — exposure to corrosive environments, and — practical service tests. This document takes into account only pitting corrosion of the basis metal resulting from penetration of the protective anodic oxidation coating. NOTE 1 ISO 8993[1] describes a similar rating system based on defined chart scales. NOTE 2 The grid rating system is frequently used for rating the results of short-term corrosion tests for relatively thin anodic oxidation coating, such as those used in the automotive industry.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
ISO
ISO 8993:2018(Main)
Anodizing of aluminium and its alloys — Rating system for the evaluation of pitting corrosion — Chart method

This document specifies a chart rating system based on standard charts that provides a means of defining levels of performance of anodic oxidation coatings on aluminium and its alloys that have been subjected to corrosion tests. This rating system is applicable to pitting corrosion resulting from — accelerated tests, — exposure to corrosive environments, and — practical service tests. This document takes into account only pitting corrosion resulting from penetration of the protective anodic oxidation coating.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off
ISO
ISO 2085:2018(Main)
Anodizing of aluminium and its alloys — Check for continuity of thin anodic oxidation coatings — Copper sulfate test

This document specifies a method for checking the continuity of thin anodic oxidation coatings on aluminium and its alloys by a copper sulfate contact test. The use of this method is limited to anodic oxidation coatings of thickness less than 5 µm or coatings that have been deformed, which includes those produced by coil anodizing techniques. NOTE The method described enables a rapid check to be made for the continuity of a thin coating of aluminium oxidation on aluminium and its alloys. In cases of doubt regarding a visible fault on the surface of a coating, the use of this method makes it possible to verify whether the fault corresponds to a local gap in the coating that exposes bare metal.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off