Technical drawings — Installations — Part 6: Graphical symbols for supply water and drainage systems in the ground

Establishes basic symbols for conduits, pipes and ditches including fabricated parts and equipment. Symbols are shown and used primaily in plans, but they can in applicable cases also be used in sections, cuts and elevations. This part of ISO 4067 will be modified as soon as results are available from the work concerning the coordination of symbols for use in drawings in all technical areas.

Dessins techniques — Installations — Partie 6: Symboles graphiques pour systèmes d'alimentation en eau et de drainage dans le sol

Tehnične risbe - Instalacije - 6. del: Grafični simboli vodovodnih in kanalizacijskih sistemov v tleh

General Information

Status
Withdrawn
Publication Date
15-May-1985
Withdrawal Date
15-May-1985
Current Stage
9599 - Withdrawal of International Standard
Completion Date
02-May-2005

Relations

Buy Standard

Standard
ISO 4067-6:1985 - Technical drawings -- Installations
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 4067-6:1995
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 4067-6:1985 - Dessins techniques -- Installations
French language
5 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 4067-6:1985 - Dessins techniques -- Installations
French language
5 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

International Standard
INTERNATIONAL ORGANlZATlON FOR STANDARDIZATIONOMEXAYHAPOAHAR OPrAHM3AuMR l-l0 CTAHAAPTM3AlWlM.ORGANISATlON INTERNATIONALE DE NORMALISATION
Technical drawings - Installations -
Part 6 : Graphical Symbols for supply water and drainage
Systems in the ground
Partie 6 : Symboles graphiques pour syst&mes d’afimentation en eau et de drainage dans
Dessins techniques - lnstalfa tions -
Ie so/
First edition - 19854545
Ref. No. ISO 4067/6-1985 (E)
UD6 744.43 : 626.86 : 003.62
water supply, drainpipes, graphic methods, Symbols, graphic Symbols.
Descriptors : drawings, technical drawings,
Price based on 5 pages

---------------------- Page: 1 ----------------------
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards bodies (ISO member bodies). The work of preparing International
Standards is normally carried out through ISO technical committees. Esch member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take patt in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council. They are approved in accordance with ISO procedures requiring at
least 75 % approval by the member bodies voting.
International Standard ISO 4067/6 was prepared by Technical Committee ISO/TC 10,
Technical drawings.
0 International Organkation for Standardkation, 1985
Printed in Switzerland

---------------------- Page: 2 ----------------------
ISO 4067/6-1985 (EI
INTERNATIONAL STANDARD
Technical drawings - lnstallations -
Part 6 : Graphical Symbols for supply water and drainage
Systems in the ground
ISO 5455, Technical drawings - Scales.
0 lntroduction
During the preparation of this part of ISO 4067, due consider- ISO 6428, Technical drawings - ßequirements for micro-
ation was given to ensuring that it was in line with the coor- cop ying.
dinated System of existing Standards and standardization work
within closely related technical fields.
3 General rules
A thoroughgoing review to coordinate Symbols for use on
drawings in all technical areas is, however, urgently needed. A Conduits and pipes are generally represented symbolically by
Start on this work has already been made by ISO/TC 10,
one continuous line showing the conduits and pipes in an
Technical drawings. “open conduit pit”. Conduits and pipes are given designation
Codes.
This part of ISO 4067 will be modified as soon as results are
forthcoming from this Coordination work.
Parts other than conduits and pipes are represented in a
simplified manner and are characterized in the text or given
designation Codes. They are also normally drawn with con-
1 Scope and field of application
tinuous lines.
This part of ISO 4067 establishes conventional basic graphical
On Plans, the Single symbolic line represents the centre line. On
Symbols for conduits, pipes and ditches including fabricated
sections and Cuts, the Single symbolic line represents the lower
Parts and equipment, for use on drawings and diagrams for
Point of the inner pipe surface in conduits.2)
supply water and drainage Systems in the ground.
When necessary the designation code of the conduit and pipe
For more detailed representation, these basic Symbols may be
is completed by an arrow which Shows the direction of flow
combined with designations, specified in a System of more
(sec ISO 4607/1).
detailed Symbols, on the drawing, or described separately.
If necessary, for example in narrow passages to show their
The Symbols are shown and used primarily on Plans, but th
...

SLOVENSKI STANDARD
SIST ISO 4067-6:1995
01-junij-1995
7HKQLþQHULVEH,QVWDODFLMHGHO*UDILþQLVLPEROLYRGRYRGQLKLQNDQDOL]DFLMVNLK
VLVWHPRYYWOHK
Technical drawings -- Installations -- Part 6: Graphical symbols for supply water and
drainage systems in the ground
Dessins techniques -- Installations -- Partie 6: Symboles graphiques pour systèmes
d'alimentation en eau et de drainage dans le sol
Ta slovenski standard je istoveten z: ISO 4067-6:1985
ICS:
01.080.30 *UDILþQLVLPEROL]DXSRUDERY Graphical symbols for use on
ULVEDKGLDJUDPLKQDþUWLK mechanical engineering and
]HPOMHYLGLKYVWURMQLãWYXLQ construction drawings,
JUDGEHQLãWYXWHUYXVWUH]QL diagrams, plans, maps and in
WHKQLþQLSURL]YRGQL relevant technical product
GRNXPHQWDFLML documentation
01.100.30 *UDGEHQLQDþUWL Construction drawings
SIST ISO 4067-6:1995 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 4067-6:1995

---------------------- Page: 2 ----------------------

SIST ISO 4067-6:1995
International Standard
INTERNATIONAL ORGANlZATlON FOR STANDARDIZATIONOMEXAYHAPOAHAR OPrAHM3AuMR l-l0 CTAHAAPTM3AlWlM.ORGANISATlON INTERNATIONALE DE NORMALISATION
Technical drawings - Installations -
Part 6 : Graphical Symbols for supply water and drainage
Systems in the ground
Partie 6 : Symboles graphiques pour syst&mes d’afimentation en eau et de drainage dans
Dessins techniques - lnstalfa tions -
Ie so/
First edition - 19854545
Ref. No. ISO 4067/6-1985 (E)
UD6 744.43 : 626.86 : 003.62
water supply, drainpipes, graphic methods, Symbols, graphic Symbols.
Descriptors : drawings, technical drawings,
Price based on 5 pages

---------------------- Page: 3 ----------------------

SIST ISO 4067-6:1995
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards bodies (ISO member bodies). The work of preparing International
Standards is normally carried out through ISO technical committees. Esch member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take patt in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council. They are approved in accordance with ISO procedures requiring at
least 75 % approval by the member bodies voting.
International Standard ISO 4067/6 was prepared by Technical Committee ISO/TC 10,
Technical drawings.
0 International Organkation for Standardkation, 1985
Printed in Switzerland

---------------------- Page: 4 ----------------------

SIST ISO 4067-6:1995
ISO 4067/6-1985 (EI
INTERNATIONAL STANDARD
Technical drawings - lnstallations -
Part 6 : Graphical Symbols for supply water and drainage
Systems in the ground
ISO 5455, Technical drawings - Scales.
0 lntroduction
During the preparation of this part of ISO 4067, due consider- ISO 6428, Technical drawings - ßequirements for micro-
ation was given to ensuring that it was in line with the coor- cop ying.
dinated System of existing Standards and standardization work
within closely related technical fields.
3 General rules
A thoroughgoing review to coordinate Symbols for use on
drawings in all technical areas is, however, urgently needed. A Conduits and pipes are generally represented symbolically by
Start on this work has already been made by ISO/TC 10,
one continuous line showing the conduits and pipes in an
Technical drawings. “open conduit pit”. Conduits and pipes are given designation
Codes.
This part of ISO 4067 will be modified as soon as results are
forthcoming from this Coordination work.
Parts other than conduits and pipes are represented in a
simplified manner and are characterized in the text or given
designation Codes. They are also normally drawn with con-
1 Scope and field of application
tinuous lines.
This part of ISO 4067 establishes conventional basic graphical
On Plans, the Single symbolic line represents the centre line. On
Symbols for conduits, pipes and ditches including fabricated
sections and Cuts, the Single symbolic line represents the lower
Parts and eq
...

Norme internationale 406716
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEX((LZYHAPO~HAR OPTAHM3AL&lR I-I0 CTAHAAPTH3AL&WORGANISA?ION INTERNATIONALE DE NORMALISATION
Dessins techniques - Installations -
Partie 6 : Symboles graphiques pour systèmes
d’alimentation en eau et de drainage dans le sol
Technical drawings - Installations - Part 6 : Graphical symbols for supply water and drainage systems in the ground
Première édition - 1985-05-15
CDU 744.43 : 626.86 : 003.62 RAf. no : ISO 4067/6-1985 (F)
Descripteurs : dessin, dessin industriel, alimentation en eau, drain, représentation graphique, symbole, symbole graphique.
1
Prix basé sur 5 pages

---------------------- Page: 1 ----------------------
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I‘ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
créé à cet effet. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO. Les Normes internationales sont approuvées confor-
mément aux procédures de I’ISO qui requiérent l’approbation de 75 % au moins des
comités membres votants.
La Norme internationale ISO 4067/6 a été élaborée par le comité technique ISO/TC 10,
Dessins techniques.
0 Organisation internationale de normalisation, 1985 l
Imprimé en Suisse

---------------------- Page: 2 ----------------------
ISO 4067/6-1985 (F)
NORME INTERNATIONALE
Dessins techniques - Installations -
Partie 6 : Symboles graphiques pour systèmes
d’alimentation en eau et de drainage dans le sol
ISO 4069, Dessins de bâtiment et de génie civil - Représenta-
0 Introduction
tion des surfaces sur des coupes et des vues - Principes géné-
Lors de l’élaboration de la présente partie de I’ISO 4067, on a
raux.
particulièrement veillé à ce qu’elle fût alignée avec le système
ISO 5455, Dessins techniques - ichelles.
coordonné de normes existantes et des travaux de normalisa-
tion dans les domaines techniques étroitement connexes.
ISO 6420, Dessins techniques - Conditions requises pour la
micrographie.
Un examen approfondi visant à coordonner les symboles à
l’usage des dessins dans tous les secteurs techniques est
cependant extrêmement urgent. Ces travaux ont déjà été enta-
3 Règles générales
més par I’ISO/TC 10, Dessins techniques.
Les conduites et les tuyaux sont, en principe, symboliquement
représentés par un trait continu représentant les conduites et
La présente partie de I’ISO 4067 sera modifiée dés réception des
tuyaux dans un «puits de conduite ouvert». Des codes de dési-
résultats que requiérent ces travaux de coordination.
gnation sont donnés aux conduites et aux tuyaux.
Les parties autres que les conduites et les tuyaux sont représen-
1 Objet et domaine d’application
tées d’une manière simplifée et sont explicitées dans le texte ou
alors, des codes de désignation sont donnés. Elles sont égale-
La présente partie de I’ISO 4067 établit les symboles graphiques
ment représentées par des traits continus.
de base, en plus de ceux donnés dans I’ISO 4067/1, pour con-
duites, tuyaux et fossés, parties construites et équipement,
Sur les vues en plan, le simple trait symbolique represente l’axe
pour l’utilisation sur les dessins et schémas des systémes d’ali-
central. Sur les coupes, le simple trait symbolique représente le
mentation en eau et de drainage dans le sol.
point le plus bas de la surface intérieure dans les conduites*).
Pour une représentation plus détaillée, ces symboles de base
Si nécessaire, le code de désignation de la conduite ou du
peuvent être associés à des indications particulières, spécifiées
tuyau est complété par une flèche qui indique la direction de
dans un système de symboles plus détaillés sur le dessin ou
l’écoulement (voir ISO 4067/ 1).
décrites séparément.
Les conduites et tuyaux sont représentés par des doubles traits
Les symboles sont représentés et utilisés essentiellement sur s’il est né
...

Norme internationale 406716
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEX((LZYHAPO~HAR OPTAHM3AL&lR I-I0 CTAHAAPTH3AL&WORGANISA?ION INTERNATIONALE DE NORMALISATION
Dessins techniques - Installations -
Partie 6 : Symboles graphiques pour systèmes
d’alimentation en eau et de drainage dans le sol
Technical drawings - Installations - Part 6 : Graphical symbols for supply water and drainage systems in the ground
Première édition - 1985-05-15
CDU 744.43 : 626.86 : 003.62 RAf. no : ISO 4067/6-1985 (F)
Descripteurs : dessin, dessin industriel, alimentation en eau, drain, représentation graphique, symbole, symbole graphique.
1
Prix basé sur 5 pages

---------------------- Page: 1 ----------------------
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I‘ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
créé à cet effet. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO. Les Normes internationales sont approuvées confor-
mément aux procédures de I’ISO qui requiérent l’approbation de 75 % au moins des
comités membres votants.
La Norme internationale ISO 4067/6 a été élaborée par le comité technique ISO/TC 10,
Dessins techniques.
0 Organisation internationale de normalisation, 1985 l
Imprimé en Suisse

---------------------- Page: 2 ----------------------
ISO 4067/6-1985 (F)
NORME INTERNATIONALE
Dessins techniques - Installations -
Partie 6 : Symboles graphiques pour systèmes
d’alimentation en eau et de drainage dans le sol
ISO 4069, Dessins de bâtiment et de génie civil - Représenta-
0 Introduction
tion des surfaces sur des coupes et des vues - Principes géné-
Lors de l’élaboration de la présente partie de I’ISO 4067, on a
raux.
particulièrement veillé à ce qu’elle fût alignée avec le système
ISO 5455, Dessins techniques - ichelles.
coordonné de normes existantes et des travaux de normalisa-
tion dans les domaines techniques étroitement connexes.
ISO 6420, Dessins techniques - Conditions requises pour la
micrographie.
Un examen approfondi visant à coordonner les symboles à
l’usage des dessins dans tous les secteurs techniques est
cependant extrêmement urgent. Ces travaux ont déjà été enta-
3 Règles générales
més par I’ISO/TC 10, Dessins techniques.
Les conduites et les tuyaux sont, en principe, symboliquement
représentés par un trait continu représentant les conduites et
La présente partie de I’ISO 4067 sera modifiée dés réception des
tuyaux dans un «puits de conduite ouvert». Des codes de dési-
résultats que requiérent ces travaux de coordination.
gnation sont donnés aux conduites et aux tuyaux.
Les parties autres que les conduites et les tuyaux sont représen-
1 Objet et domaine d’application
tées d’une manière simplifée et sont explicitées dans le texte ou
alors, des codes de désignation sont donnés. Elles sont égale-
La présente partie de I’ISO 4067 établit les symboles graphiques
ment représentées par des traits continus.
de base, en plus de ceux donnés dans I’ISO 4067/1, pour con-
duites, tuyaux et fossés, parties construites et équipement,
Sur les vues en plan, le simple trait symbolique represente l’axe
pour l’utilisation sur les dessins et schémas des systémes d’ali-
central. Sur les coupes, le simple trait symbolique représente le
mentation en eau et de drainage dans le sol.
point le plus bas de la surface intérieure dans les conduites*).
Pour une représentation plus détaillée, ces symboles de base
Si nécessaire, le code de désignation de la conduite ou du
peuvent être associés à des indications particulières, spécifiées
tuyau est complété par une flèche qui indique la direction de
dans un système de symboles plus détaillés sur le dessin ou
l’écoulement (voir ISO 4067/ 1).
décrites séparément.
Les conduites et tuyaux sont représentés par des doubles traits
Les symboles sont représentés et utilisés essentiellement sur s’il est né
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.