ISO 8804-1:2024
(Main)Requirements for the training of scientific divers — Part 1: Scientific divers
Requirements for the training of scientific divers — Part 1: Scientific divers
This document specifies minimum requirements for the training of scientific divers to undertake scientific diving. This document specifies evaluation criteria for these competencies. This document specifies the requirements under which training is provided, in addition to the general requirements for recreational diving service provision according to ISO 24803.
Exigences concernant la formation des plongeurs scientifiques — Partie 1: Plongeurs scientifiques
Le présent document fixe des exigences minimales concernant la formation des plongeurs scientifiques afin de leur permettre de mener à bien des plongées scientifiques. Le présent document définit des critères d’évaluation des compétences requises. Le présent document fixe des exigences relatives à l’organisation de la formation, en plus des exigences générales concernant la fourniture de services relatifs à la plongée de loisirs, conformément à l’ISO 24803.
General Information
Standards Content (Sample)
International
Standard
ISO 8804-1
First edition
Requirements for the training of
2024-04
scientific divers —
Part 1:
Scientific divers
Exigences concernant la formation des plongeurs scientifiques —
Partie 1: Plongeurs scientifiques
Reference number
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Competencies . 2
5 Prerequisites for training . 2
5.1 General .2
5.2 Minors and vulnerable persons .2
5.3 Health requirements .2
5.4 Diving competencies .2
6 Introductory information . 2
7 Theoretical knowledge . 3
7.1 Diving-related knowledge .3
7.1.1 General .3
7.1.2 Risk assessment .3
7.2 Scientific methodologies and protocols .3
7.2.1 General .3
7.2.2 Generic methods .3
7.2.3 Survey techniques .4
7.2.4 Diving environments and conditions .4
7.2.5 Navigation techniques .5
8 Practical scientific diving skills . 5
9 Requirements for the provision of training . 5
9.1 Overall supervision .5
9.2 Instructors .6
9.2.1 Diving knowledge and skills .6
9.2.2 Scientific knowledge and skills .6
9.3 Risk assessment .6
9.4 Surface support procedures .6
9.5 Emergency equipment and procedures.7
9.5.1 Emergency equipment .7
9.5.2 Emergency procedures .7
9.6 Practical training parameters .7
10 Qualification criteria . . 8
10.1 Knowledge .8
10.2 Skills . .8
Bibliography . 9
iii
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 228, Tourism and related services, in
collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC 329,
Tourism services, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna
Agreement).
A list of all parts in the ISO 8804 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
Introduction
The ISO 8804 series is aimed primarily at scientists and academics training to become scientific divers
(at three levels of competency) and sets minimum requirements for the training of scientific divers at the
three levels reflected in the names of the three parts. It will be beneficial both to organizations involved in
training scientific divers and the scientific diving community as a whole.
This document is considered the minimum competency standard for recognition as a scientific diver. It is
intended to provide guidance regarding agreed-upon minimum training requirements, thereby easing
barriers to cross-programme co-operation and reciprocity through common acknowledgment of the basic
skill set for scientific divers.
Many organisations will have additional requirements for qualification of scientific divers. These
supplementary requirements could include, but are not limited to, a greater number of training dives,
additional training, enhanced fitness qualifications and requirements for maintenance of active diver status.
v
International Standard ISO 8804-1:2024(en)
Requirements for the training of scientific divers —
Part 1:
Scientific divers
1 Scope
This document specifies minimum requirements for the training of scientific divers to undertake
scientific diving.
This document specifies evaluation criteria for these competencies.
This document specifies the requirements under which training is provided, in addition to the general
requirements for recreational diving service provision according to ISO 24803.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
ISO 8804-3, Requirements for the training of scientific divers – Part 3: Scientific diving project leader
ISO 21416, Recreational diving services — Requirements and guidance on environmentally sustainable practices
in recreational diving
ISO 24801-2, Recreational diving services — Requirements for the training of recreational scuba divers — Part
2: Level 2 — Autonomous diver
ISO 24801-3:2014, Recreational diving services — Requirements for the training of recreational scuba divers —
Part 3: Level 3 — Dive leader
ISO 24802-2, Recreational diving services — Requirements for the training of scuba instructors — Part 2: Level 2
ISO 24803, Recreational diving services — Requirements for recreational diving providers
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electrop
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.