ISO 15442:2012/Amd 1:2015

Cranes — Safety requirements for loader cranes — Amendment 1

Appareils de levage à charge suspendue — Exigences de sécurité pour les grues de chargement — Amendement 1

General Information

• Status: Published
• Publication Date: 02-Nov-2015
• ICS: 53.020.20 - Cranes
• Technical Committee: ISO/TC 96/SC 6 - Mobile cranes
• Drafting Committee: ISO/TC 96/SC 6 - Mobile cranes
• Current Stage: 6060 - International Standard published
• Due Date: 17-Jul-2017
• Completion Date: 03-Nov-2015

Relations

• Amends: ISO 15442:2012 - Cranes — Safety requirements for loader cranes
• Effective Date: 08-Jan-2022

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 15442
Second edition
2012-11-15
AMENDMENT 1
2015-11-01
Cranes — Safety requirements for
loader cranes
AMENDMENT 1
Appareils de levage à charge suspendue — Exigences de sécurité pour
les grues de chargement
AMENDEMENT 1
Reference number
ISO 15442:2012/Amd.1:2015(E)
©
ISO 2015

---------------------- Page: 1 ----------------------
ISO 15442:2012/Amd.1:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 15442:2012/Amd.1:2015(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. T
...