iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 3792:1976

(Main)

Adding machines — Layout of function keyboard

Adding machines — Layout of function keyboard

Outlines the keyboard arrangement of adding machines. References: ISO 1092; 1093; 3244; 3791.

Machines à additionner — Disposition des touches de fonction

General Information

Status
Published
Publication Date
31-May-1976
ICS
35.160 - Microprocessor systems
Technical Committee
ISO/IEC JTC 1 - Information technology
Drafting Committee
ISO/IEC JTC 1 - Information technology
Current Stage
9093 - International Standard confirmed
Completion Date
07-May-2021
Ref Project

Buy Standard

ISO 3792:1976 - Adding machines -- Layout of function keyboardISO 3792:1976 - Adding machines -- Layout of function keyboard
PreviousNext
Standard
ISO 3792:1976 - Adding machines -- Layout of function keyboard
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 3792:1976 - Machines a additionner -- Disposition des touches de fonctionISO 3792:1976 - Machines a additionner -- Disposition des touches de fonction
PreviousNext
Standard
ISO 3792:1976 - Machines a additionner -- Disposition des touches de fonction
French language
2 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 3792:1976 - Machines a additionner -- Disposition des touches de fonctionISO 3792:1976 - Machines a additionner -- Disposition des touches de fonction
PreviousNext
Standard
ISO 3792:1976 - Machines a additionner -- Disposition des touches de fonction
French language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL STANDARD
3792
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEX~YHAPOfiHAJl OPrAHM3AUMII I-IO CTAHAAPTM3AUMM-ORGANISATION INTERNATIONALE DE NORMALISATION
Adding machines - Layout of function keyboard
Machines 6 additionner - Disposition des touches de fonction
First edition - 1976-06-01
w
-
UDC 651.2 : 681.321-51 Ref. No. ISO 3792-1976 (E)
Descriptors : Office machines, adding maqhines, keyboards, keys (keyboards), Iayout.
Price based on 2 pages

---------------------- Page: 1 ----------------------
FOREWORD
ISO (the International Organization for Standardization) is a worlwide federation
of national Standards institutes (ISO Member Bodies). The work of developing
International Standards is carried out through ISO Technical Committees. Every
Member Body interested in a subject for which a Technical Committee has been set
up has the right to be represented on that Committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated
to the Member Bodies for approval before their acceptance as International
Standards by the ISO Council.
International Standard ISO 3792 was drawn up by Technical Committee
lSO/TC 95, Office machines, and was circulated to the Member Bodies in
May 1975.
lt has been approved by the Member Bodies of the following countries :
Australia Japan U.S.A.
Czechoslovakia Romania U.S.S.R.
France Sweden Yugoslavia
Turkey
Germany
United Kingdom
Italy
No Member Body expressed disapproval of the document.
0 International Organkation for Standardkation, 1976 l
Printed in Switzerland

---------------------- Page: 2 ----------------------
ISO 3792-1976 (E)
INTERNATIONAL STANDARD
Layout of function keyboard
Adding machines -
3.1 Numeric area (N)
1 SCOPE AND FIELD OF APPLICATION
The numeric area of the keyboard comprises a clustered
This International Standard specifies the keyboard layout
numeric section for the ten digits and some optional keys
for adding machines.
for additional characters, in conformity with ISO 3791.
3.2 Control zones (Zl and 22)
2 REFERENCES
The control zones comprise keys to perform all functions
which are necessary in the c
...

~-
3792
NORME INTERNATIONALE.
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXaYHAPOflHAJl OPI-AHW3AWV’I l-l0 CTAH~APTM3AIJWl-i .ORGANISATION INTERNATIONALE DE NORMALISATION
Disposition des touches de fonction
Machines à additionner -
Adding machines - Layout of function keyboard
Première édition - 1976-06-01
cî
- Réf. no : ISO 37924976 (F)
CDU 651.2 : 681.321-51
Descripteurs : machine de bureau, machine à additionner, clavier, touche de clavier, disposition.
Q:
m
Prix basé sur 2 pages

---------------------- Page: 1 ----------------------
AVANT-PROPOS
L’ISO (Organisation Internationale de Normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (Comités Membres KO). L’élaboration
des Normes Internationales est confiée aux Comités Techniques ISO. Chaque
Comité Membre intéressé par une étude a le droit de faire partie du Comité
Technique correspondant. Les organisations internationales, gouvernementales et
. <
non gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
sousmis aux Comités Membres pour approbation, avant leur acceptation comme
Normes Internationales par le Conseil de I’ISO.
La Norme Internationale ISO 3792 a été établie par le Comité Technique
ISO/TC 95, Machines de bureau, et a été soumise aux Comités Membres en
mai 1975.
Elle a été approuvée par les Comités Membres des pays suivants :
Allemagne Roumanie U.R.S.S.
Australie Royaume-Uni U.S.A.
France Suède Yougoslavie
Italie Tchécoslovaquie
Japon Turquie
Aucun Comité Membre n’a désapprouvé le document.
0 Organisation Internationale de Normalisation, 1976 l
Imprimé en Suisse

---------------------- Page: 2 ----------------------
ISO 37924976 (F)
NORME INTERNATIONALE
Disposition des touches de fonction
Machines 8 additionner -
1 O’BJET ET DOMAINE D’APPLICATION 3.1 Zone numérique (NI
La .présente Norme Internationale fixe la disposition du La zone numérique du clavier comprend le bloc des dix
chiffres et quelques touches facultatives pour les caractères
clavier équipant les machines à additionner. ’
supplémentaires, conformément à I’ISO 3791.
3.2 Zones des commandes (21 et 22)
.
Les zones des commandes comprennent les touches qui
2 RÉFÉRENCES
permettent de mettre en œuvre toute
...

3792
NORME INTERNATIONALE.
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXaYHAPOflHAJl OPI-AHW3AWV’I l-l0 CTAH~APTM3AIJWl-i .ORGANISATION INTERNATIONALE DE NORMALISATION
Disposition des touches de fonction
Machines à additionner -
Adding machines - Layout of function keyboard
Première édition - 1976-06-01
Réf. no : ISO 37924976 (F)
CDU 651.2 : 681.321-51
Descripteurs : machine de bureau, machine à additionner, clavier, touche de clavier, disposition.
Prix basé sur 2 pages

---------------------- Page: 1 ----------------------
AVANT-PROPOS
L’ISO (Organisation Internationale de Normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (Comités Membres KO). L’élaboration
des Normes Internationales est confiée aux Comités Techniques ISO. Chaque
Comité Membre intéressé par une étude a le droit de faire partie du Comité
Technique correspondant. Les organisations internationales, gouvernementales et
. <
non gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
sousmis aux Comités Membres pour approbation, avant leur acceptation comme
Normes Internationales par le Conseil de I’ISO.
La Norme Internationale ISO 3792 a été établie par le Comité Technique
ISO/TC 95, Machines de bureau, et a été soumise aux Comités Membres en
mai 1975.
Elle a été approuvée par les Comités Membres des pays suivants :
Allemagne Roumanie U.R.S.S.
Australie Royaume-Uni U.S.A.
France Suède Yougoslavie
Italie Tchécoslovaquie
Japon Turquie
Aucun Comité Membre n’a désapprouvé le document.
0 Organisation Internationale de Normalisation, 1976 l
Imprimé en Suisse

---------------------- Page: 2 ----------------------
ISO 37924976 (F)
NORME INTERNATIONALE
touches de fonction
des
8 additionner - Disposition
Machines
> .
r
Fi
1 O’BJET ET DOMAINE D’APPLICATION 3.1 Zone numérique (NI
* T
La .présente Norme Internationale fixe la disposition du La zone numérique du clavier comprend le bloc des dix
chiffres et quelques touches facultatives pour les caractères
clavier équipant les machines à additionner. ’
supplémentaires, conformément à I’ISO 3791.
3.2 Zones des commandes (21 et 22)
Les zones des commandes comprennent les touches qui
2 RÉFÉRENCES
perm
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO/IEC 60559:2020(Main)
Information technology — Microprocessor Systems — Floating-Point arithmetic

This standard specifies interchange and arithmetic formats and methods for binary and decimal floating-point arithmetic in computer programming environments. This standard specifies exception conditions and their default handling. An implementation of a floating-point system conforming to this standard may be realized entirely in software, entirely in hardware, or in any combination of software and hardware. For operations specified in the normative part of this standard, numerical results and exceptions are uniquely determined by the values of the input data, sequence of operations, and destination formats, all under user control.

  • Standard
    74 pages
    English language
    sale 15% off
ISO
ISO/IEC 15776:2001(Main)
VME64bus — Specification

The VMEbus specification defines an interfacing system used to interconnect microprocessors, data storage, and peripheral control devices in a closely coupled hardware configuration. The system has been conceived with the following objectives: a) to allow communication between devices on the VMEbus without disturbing the internal activities of other devices interfaced to the VMEbus; b) to specify the electrical and mechanical system characteristics required to design devices that will reliably and unambiguously communicate with other devices interfaced to the VMEbus; c) to specify protocols that precisely define the interaction between the VMEbus and devices interfaced to it; d) to provide terminology and definitions that describe the system protocol; e) to allow a broad range of design latitude so that the designer can optimize cost and/or performance without affecting system compatibility; f) to provide a system where performance is primarily device limited, rather than system interface limited.

  • Standard
    262 pages
    English language
    sale 15% off
ISO
ISO/IEC 13961:2000(Main)
Information technology — Scalable Coherent Interface (SCI)

The scalable coherent interface (SCI) provides computer-bus-like services but, instead of a bus, uses a collection of fast point-to-point unidirectional links to provide the far higher throughput needed for high-performance multiprocessor systems. SCI supports distributed, shared memory with optional cache coherence for tightly coupled systems, and message-passing for loosely coupled systems. Initial SCI links are defined at 1 Gbyte/s (16-bit parallel) and 1 Gb/s (serial). For applications requiring modular packaging, an interchangeable module is specified along with connector and power. The packets and protocols that implement transactions are defined and their formal specification is provided in the form of computer programs. In addition to the usual read-and-write transactions, SCI supports efficient multiprocessor lock transactions. The distributed cache-coherence protocols are efficient and can recover from an arbitrary number of transmission failures. SCI protocols ensure forward progress despite multiprocessor conflicts (no deadlocks or starvation).

  • Standard
    272 pages
    English language
    sale 15% off
ISO
ISO/IEC 11458:1993/Amd 1:2000(Amendment)
Information technology — Microprocessor systems — VICbus — Inter-crate cable bus — Amendment 1
  • Standard
    2 pages
    English language
    sale 15% off
ISO
ISO/IEC 14575:2000(Main)
Information technology — Microprocessor systems — Heterogeneous InterConnect (HIC) (Low-Cost, Low-Latency Scalable Serial Interconnect for Parallel System Construction)

This International Standard applies to physical connectors and cables, electrical properties, and logical protocols for point-to-point serial scalable interconnect, operating at speeds of 10 Mbit/s to 200 Mbit/s and at 1 Gbit/s in copper and optic technologies (as developed in Open Microprocessor Systems Initiative/Heterogeneous InterConnect Project (OMI/HIC)). The object of this International Standard is to enable high-performance, scalable, modular, parallel systems to be constructed with low system integration cost; to support communications systems fabric; to provide a transparent implementation of a range of high-level protocols (communications, e.g. ATM, message passing, shared memory transactions, etc.), and to support links between heterogeneous systems.

  • Standard
    162 pages
    English language
    sale 15% off
ISO
ISO/IEC 15205:2000(Main)
SBus — Chip and module interconnect bus

SBus is a high performance computer I/O interface for connecting integrated circuits and SBus Cards to a computer system motherboard. This standard defines the mechanical, electrical, environmental, and protocol requirements for the design of SBus Cards and the computer system motherboard that supports those cards. Every SBus Card shall implement appropriate self-descriptive and initialization firmware using FCode, which is similar to the Forth programming language. The details of this firmware standard are beyond the scope of this standard.1) In addition, other software interfaces may be used for communication with SBus Cards. SBus is intended to provide a high performance I/O bus interface with a small mechanical form factor. The small size, high levels of integration, and low power usage of SBus Cards enable them to be used in laptop computers, compact desktop computers, and other applications requiring similar characteristics. SBus Cards are mounted in a plane parallel to the motherboard of the computer system, allowing the computer system to have a low profile. SBus is not designed as a general purpose backplane bus. SBus allows transfers to be in units of 8, 16, 32, or 64 bits. Burst transfers are allowed to further improve performance. SBus allows a number of SBus Master devices to arbitrate for access to the bus. The chosen SBus Master provides a 32-bit virtual address which the SBus Controller maps to the selection of the proper SBus Slave and the development of the 28-bit physical address for that Slave. The selected SBus Slave then performs the data transfers requested by the SBus Master. Simple SBus Cards may be designed to operate solely as Slaves on the SBus. 1.2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of IEC and ISO maintain registers of currently valid International Standards. IEEE Std 1275:1994, IEEE Standard for Boot (Initialization Configuration) Firmware: Core Requirements and Practices2) 1) A firmware interface standard is under consideration. 2) IEEE publications are available from the Institute of Electrical and Electronics Engineers, 445 Hoes Lane, P.O. Box 1331, Piscataway, NJ 08855-1331, USA (standards.ieee.org/).

  • Standard
    103 pages
    English language
    sale 15% off
ISO
ISO/IEC 14576:1999(Main)
Information technology — Synchronous Split Transfer Type System Bus (STbus) — Logical Layer

This International Standard specifies the logical specifications of STbus which is a highperformance and highly reliable system bus. STbus adopts a synchronous transfer method with a high-speed clock and a split transfer method enabling to minimize bus holding time during one bus operation and to use a bus efficiently. The contents given in this specifications are as follows: a) System bus interface signal provisions; b) Bus operations and transfer protocol for each bus operation; c) Copyback cache coherency control for maintaining consistency between a shared memory and a cache memory of each processor in a multiprocessor system; d) Fault detection function using parity check and duplex configuration for control signals.

  • Standard
    81 pages
    English language
    sale 15% off
ISO
IEC 60821:1991/Amd 1:1999(Amendment)
VMEbus — Microprocessor system bus for 1 byte to 4 byte data — Amendment 1
  • Standard
    8 pages
    English language
    sale 15% off
ISO
ISO/IEC 10859:1997(Main)
Information technology — 8-bit backplane interface: STEbus and mechanical core specifications for microcomputers
  • Standard
    97 pages
    English language
    sale 15% off
ISO
ISO/IEC 10861:1994(Main)
Information technology — Microprocessor systems — High-performance synchronous 32-bit bus: MULTIBUS II

Defines the operation, functions, and attributes of the IEEE 1296 bus standard. Defines a high-performance 32-bit synchronous bus standard. Intended for general purpose applications to optimize block transfers, including protocol for message passing. Intended to support multiple processor modules in a functionally partitioned configuration and heterogeneous processor types in the same system and heterogeneous processor types in the same system.

  • Standard
    130 pages
    English language
    sale 15% off