ISO 6398-1:2024
(Main)Oil and gas industries including lower carbon energy — Submersible linear motor systems for artificial lift — Part 1: Submersible linear motor
Oil and gas industries including lower carbon energy — Submersible linear motor systems for artificial lift — Part 1: Submersible linear motor
This document provides requirements for the design, design verification and validation, quality control, functional evaluations and storage of submersible linear motor (SLM) systems. This document is applicable to components of submersible linear motors including stators, movers and motor lead extension cables. This document also specifies design validation performance rating requirements and functional evaluation for SLM. Equipment not covered by this document includes pumps and other fittings, power cables and drive systems.
Industries du pétrole et du gaz, y compris les énergies à faible teneur en carbone — Systèmes de moteurs linéaires submersibles pour relevage assisté — Partie 1: Moteur linéaire submersible
Le présent document donne des exigences pour la conception, la vérification et la validation, le contrôle qualité, les évaluations fonctionnelles et le stockage des systèmes de moteurs linéaires submersibles (SLM). Le présent document s'applique aux composants des moteurs linéaires submersibles, y compris les stators, les moteurs et les câbles d'extension de puissance du moteur. Le présent document spécifie également les exigences de niveau de performance de validation de la conception et l'évaluation fonctionnelle pour les SLM. Les équipements non couverts par le présent document comprennent les pompes et autres accessoires, les câbles d'alimentation et les systèmes d'entraînement.
General Information
Buy Standard
Standards Content (Sample)
International
Standard
ISO 6398-1
First edition
Oil and gas industries including
2024-06
lower carbon energy —
Submersible linear motor systems
for artificial lift —
Part 1:
Submersible linear motor
Industries du pétrole et du gaz, y compris les énergies à faible
teneur en carbone — Systèmes de moteurs linéaires submersibles
pour relevage assisté —
Partie 1: Moteur linéaire submersible
Reference number
ISO 6398-1:2024(en) © ISO 2024
---------------------- Page: 1 ----------------------
ISO 6398-1:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO 6398-1:2024(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviations . 4
4.1 Abbreviated terms .4
4.2 Symbols .4
5 Functional specification . 5
5.1 General .5
5.2 SLM type description .5
5.3 Functional requirements . .5
5.3.1 General .5
5.3.2 Application parameters.5
5.3.3 Environmental compatibility .7
5.3.4 Compatibility with related well equipment and services .8
5.4 User/purchaser selections .8
5.4.1 General .
...
Norme
internationale
ISO 6398-1
Première édition
Industries du pétrole et du gaz, y
2024-06
compris les énergies à faible teneur
en carbone — Systèmes de moteurs
linéaires submersibles pour
relevage assisté —
Partie 1:
Moteur linéaire submersible
Oil and gas industries including lower carbon energy —
Submersible linear motor systems for artificial lift —
Part 1: Submersible linear motor
Numéro de référence
ISO 6398-1:2024(fr) © ISO 2024
---------------------- Page: 1 ----------------------
ISO 6398-1:2024(fr)
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2024
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
© ISO 2024 – Tous droits réservés
ii
---------------------- Page: 2 ----------------------
ISO 6398-1:2024(fr)
Sommaire Page
Avant-propos .v
Introduction .vi
1 Domaine d'application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Symboles et abréviations . 4
4.1 Abréviations.4
4.2 Symboles .4
5 Spécification fonctionnelle . 5
5.1 Généralités .5
5.2 Description de type de SLM .5
5.3 Exigences fonctionnelles.5
5.3.1 Généralités .5
5.3.2 Paramètres d'application .6
5.3.3 Compatibilité environnementale .7
5.3.4 Compatibilité avec des équipements de puits et services correspondants .8
5.4 Choix des utilisateurs/acheteurs .8
5.4.1 Généralités .
...
FINAL DRAFT
International
Standard
ISO/FDIS 6398-1
ISO/TC 67/SC 4
Oil and gas industries including
Secretariat: ANSI
lower carbon energy — Submersible
Voting begins on:
linear motor systems for artificial
2024-03-11
lift —
Voting terminates on:
2024-05-06
Part 1:
Submersible linear motor
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/FDIS 6398-1:2024(en) © ISO 2024
---------------------- Page: 1 ----------------------
FINAL DRAFT
ISO/FDIS 6398-1:2024(en)
International
Standard
ISO/FDIS 6398-1
ISO/TC 67/SC 4
Oil and gas industries including
Secretariat: ANSI
lower carbon energy —
Voting begins on:
Submersible linear motor systems
for artificial lift —
Voting terminates on:
Part 1:
Submersible linear motor
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
COPYRIGHT PROTECTED DOCUMENT
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO 2024
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/FDIS 6398-1:2024(en) © ISO 2024
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO/FDIS 6398-1:2024(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviations . 4
4.1 Abbreviated terms .4
4.2 Symbols .4
5 Functional specification . 5
5.1 General .5
5.2 SLM type description .
...
ISO/FDIS 6398-1:2023(E)
ISO/TC 67/SC 4/WG 4
Secretariat: ANSI
Date: 2024-01-1202-23
Oil and gas industries including lowlower carbon energy —
Submersible linear motor systems for artificial lift —
Part 1:
Submersible linear motor
FDIS stage
---------------------- Page: 1 ----------------------
ISO/FDIS 6398-1:2023(E2024(en)
© ISO 20232024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO
at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
EmailE-mail: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2023 – All rights reserved
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO/FDIS 6398-1:2023(E2024(en)
Contents
Foreword . v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviations . 5
4.1 Abbreviated terms . 5
4.2 Symbols . 5
5 Functional specification . 5
5.1 General . 5
5.2 SLM type description . 6
5.3 Functional requirements . 6
5.3.1 General . 6
5.3.2 Application parameters . 6
5.3.3 Environmental compatibility . 7
5.3.4 Compatibility with related well equipment and services . 8
5.4 User/purchaser selections . 9
5.4.1 General . 9
5.4.2 Design validation . 9
5.4.3 Functional evaluation . 9
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.