ISO 13073-2:2013

Ships and marine technology — Risk assessment on anti-fouling systems on ships — Part 2: Marine environmental risk assessment method for anti-fouling systems on ships using biocidally active substances

ISO 13073-2:2013 specifies a risk assessment method that protects the marine environment from the potential negative impacts of anti-fouling systems intentionally using biocidally active substances applied to a ship during its service life. This method can also be modified for use in freshwater environments. ISO 13073-2:2013 does not provide specific test methods for evaluating the hazards nor recommends usage restrictions for certain anti-fouling systems. It also does not provide an efficacy-evaluation method of the anti-fouling system using a specific substance.

Navires et technologie maritime — Évaluation des risques pour les systèmes antisalissure sur les navires — Partie 2: Méthode d'évaluation des risques environnementaux maritimes pour les systèmes antisalissure sur les navires utilisant des substances actives biocides

General Information

• Status: Published
• Publication Date: 23-May-2013
• ICS: 13.020.99 - Other standards related to environmental protection
• ICS: 47.020.99 - Other standards related to shipbuilding and marine structures
• Technical Committee: ISO/TC 8/SC 2 - Marine environment protection
• Drafting Committee: ISO/TC 8/SC 2 - Marine environment protection
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 20-Dec-2023

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 13073-2
First edition
2013-06-01
Ships and marine technology — Risk
assessment on anti-fouling systems on
ships —
Part 2:
Marine environmental risk
assessment method for anti-fouling
systems on ships using biocidally
active substances
Navires et technologie maritime — Évaluation des risques pour les
systèmes antisalissure sur les navires —
Partie 2: Méthode d’évaluation des risques environnementaux
maritimes pour les systèmes antisalissure sur les navires utilisant des
substances actives biocides
Reference number
ISO 13073-2:2013(E)
©
ISO 2013

---------------------- Page: 1 ----------------------
ISO 13073-2:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 13073-2:2013(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Application . 2
4.1 General . 2
4.2 Application considerations. 2
4.3 Structure and procedure of environmental risk assessment . 3
5 Review of the risk of a biocidally active substance when used in the anti-fouling system .3
5.1 General . 3
5.2 Assessment when a biocidally active substance is tentatively deemed to have “relatively
low risk” . 4
5.3 Assessment when a certain type of marine environment is considered to be a recipient of
biocidally active substances . 4
6 Exposure assessment . 4
6.1 Preparing the emission scenario . 4
6.2 Determination of the PEC . 6
7 Selection of the appropriate PNEC . 7
8 Risk characterization
...