iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 11504:2017

(Main)

Soil quality — Assessment of impact from soil contaminated with petroleum hydrocarbons

Soil quality — Assessment of impact from soil contaminated with petroleum hydrocarbons

ISO 11504:2017 gives guidelines with regard to the choice of fractions and individual compounds when carrying out analysis for petroleum hydrocarbons in soils, soil materials and related materials, including sediments, for the purpose of assessing risks to human health, the environment and other possible receptors. Since many products based on petroleum hydrocarbons often contain substances that are not hydrocarbons, the recommendations also encompass such compounds where relevant. ISO 11504:2017 also includes relevant background information on which the recommendations are based together with guidance on the use of the fractions recommended in the assessment of risk. ISO 11504:2017 does not set criteria or guidelines for use as assessment criteria, since this is typically a national or regional regulatory issue. This document also does not include recommendations as to the specific model for the exposure assessment or the specific parameter values to be used; with respect to guidance on this matter, reference is made to ISO 15800.

Qualité du sol — Évaluation de l'impact du sol contaminé avec des hydrocarbures pétroliers

ISO 11504:2017 fournit des lignes directrices concernant le choix des fractions et des composés individuels lors de la réalisation d'une analyse des hydrocarbures pétroliers dans les sols, les matériaux constitutifs du sol et les matériaux connexes, y compris les sédiments, à des fins d'évaluation des risques pour la santé des personnes, l'environnement et d'autres récepteurs éventuels. Étant donné que de nombreux produits à base d'hydrocarbures pétroliers contiennent souvent des substances différentes des hydrocarbures, les recommandations englobent également ces composés, le cas échéant. ISO 11504:2017 comprend également des informations de base pertinentes sur lesquelles s'appuient les recommandations, ainsi que des lignes directrices relatives à l'utilisation des fractions recommandées dans l'évaluation du risque. ISO 11504:2017 ne fixe pas de critères ou de lignes directrices faisant office de critères d'évaluation puisque ceux-ci sont généralement du ressort des instances réglementaires nationales ou régionales. Le présent document n'inclut pas non plus de recommandations concernant le modèle spécifique d'évaluation de l'exposition ou les valeurs de paramètres spécifiques à utiliser. Concernant les lignes directrices relatives à ces questions, il est fait référence à l'ISO 15800.

General Information

Status
Published
Publication Date
27-Aug-2017
ICS
13.080.01 - Soil quality and pedology in general
Technical Committee
ISO/TC 190/SC 7 - Impact assessment
Drafting Committee
ISO/TC 190/SC 7/WG 4 - Human exposure
Current Stage
9093 - International Standard confirmed
Completion Date
16-Oct-2023
Ref Project

Relations

Consolidates
ISO 1403:2005 - Rubber hoses, textile-reinforced, for general-purpose water applications — Specification
Effective Date
06-Jun-2022
Revises
ISO 11504:2012 - Soil quality — Assessment of impact from soil contaminated with petroleum hydrocarbons
Effective Date
21-Sep-2013

Buy Standard

ISO 11504:2017 - Soil quality -- Assessment of impact from soil contaminated with petroleum hydrocarbonsISO 11504:2017 - Soil quality -- Assessment of impact from soil contaminated with petroleum hydrocarbons
PreviousNext
Standard
ISO 11504:2017 - Soil quality -- Assessment of impact from soil contaminated with petroleum hydrocarbons
English language
24 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 11504:2017 - Qualité du sol -- Évaluation de l'impact du sol contaminé avec des hydrocarbures pétroliersISO 11504:2017 - Qualité du sol -- Évaluation de l'impact du sol contaminé avec des hydrocarbures pétroliers
PreviousNext
Standard
ISO 11504:2017 - Qualité du sol -- Évaluation de l'impact du sol contaminé avec des hydrocarbures pétroliers
French language
25 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 11504
Second edition
2017-08
Soil quality — Assessment of
impact from soil contaminated with
petroleum hydrocarbons
Qualité du sol — Évaluation de l’impact du sol contaminé avec des
hydrocarbures pétroliers
Reference number
ISO 11504:2017(E)
©
ISO 2017

---------------------- Page: 1 ----------------------
ISO 11504:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 11504:2017(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 3
5 Relevant fractions and individual compounds . 4
5.1 General . 4
5.2 Fractions . 4
5.3 Individual compounds . 5
6 Petroleum hydrocarbons in soil . 6
7 Exposure assessment of petroleum hydrocarbons in soil . 8
7.1 General . 8
7.2 Relevant exposure routes for petroleum hydrocarbons . 9
7.3 Exposure assessment methods . 9
7.4 Toxicity assessment methods .10
7.5 Relations between oil fractions in different media related to exposure .11
8 Issues related to sampling and investigation .13
8.1 General .13
8.2 Issues related to analysis .
...

NORME ISO
INTERNATIONALE 11504
Deuxième édition
2017-08
Qualité du sol — Évaluation de
l'impact du sol contaminé avec des
hydrocarbures pétroliers
Soil quality — Assessment of impact from soil contaminated with
petroleum hydrocarbons
Numéro de référence
ISO 11504:2017(F)
©
ISO 2017

---------------------- Page: 1 ----------------------
ISO 11504:2017(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2017, Publié en Suisse
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 11504:2017(F)

Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Principe . 3
5 Fractions et composés individuels pertinents . 4
5.1 Généralités . 4
5.2 Fractions . 4
5.3 Composés individuels . 5
6 Hydrocarbures pétroliers dans le sol . 7
7 Évaluation de l’exposition à des hydrocarbures pétroliers dans le sol .9
7.1 Généralités . 9
7.2 Voies d’exposition possibles concernant les hydrocarbures pétroliers .10
7.3 Méthodes d’évaluation de l’exposition .11
7.4 Méthodes d’évaluation de la toxicité .11
7.5 Relations entre les fractions huileuses dans différents milieux d’exposition .12
8 Questions relatives à l’échantillonnage et à l’investigation .15
8.1 Généralités .15
8.2 Questions relatives à l’analyse .15
Annexe A (informative) Propriétés physico-chimiques de d
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 21365:2019(Main)
Soil quality — Conceptual site models for potentially contaminated sites

This document provides guidance on developing and using conceptual site models (CSMs) through the various phases of investigation, remediation (if required), and any subsequent construction or engineering works. It describes what CSMs are, what they are used for and what their constituents are. It stresses the need for an iterative and dynamic approach to CSM development. This document is intended to be used by all those involved in developing CSMs and by those who rely on using them such as regulators, landowners, developers, and the public (and other relevant parties). Ideally, this includes representatives from all phases of the investigative and remedial processes, for example, preliminary assessment, detailed investigation, baseline human health and environmental risk assessments, and feasibility study, and, any subsequent construction or engineering work. NOTE 1 This document is applicable whenever the presence of "potentially harmful" or "hazardous" substances are present irrespective of whether they are naturally occurring or present due to human activity (i.e. are "contaminants"). NOTE 2 Although most of the principles described for developing CSMs in this document can apply to other domains, such as groundwater resources management, the present document is specifically written for the management of potentially contaminated sites or known contaminated sites.

  • Standard
    40 pages
    English language
    sale 15% off
  • Standard
    43 pages
    French language
    sale 15% off
ISO
ISO 16133:2018(Main)
Soil quality — Guidance on the establishment and maintenance of monitoring programmes

This document gives general guidance on the selection of procedures for the establishment and maintenance of programmes for long-term monitoring of soil quality. It takes into account the large number of objectives for soil-monitoring programmes. This document is intended to help provide a basis for dialogue between parties which might be involved in a monitoring scheme.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
ISO
ISO 18504:2017(Main)
Soil quality — Sustainable remediation

ISO 18504:2017 provides procedures on sustainable remediation. In particular, it provides: - standard methodology, terminology and information about the key components and aspects of sustainable remediation assessment; - informative advice on the assessment of the relative sustainability of alternative remediation strategies. ISO 18504:2017 is intended to inform practitioners about contemporary understanding of sustainable remediation. It is not intended to prescribe which methods of assessment, indicators or weights to use. Rather, it is intended to inform consideration of the concept of sustainable remediation in a local legal, policy, socio-economic and environmental context. The scope of ISO 18504:2017 is restricted to sustainable remediation ? that is demonstrably breaking the source-pathway-receptor linkages ? in a manner that has been shown on a site-specific basis under a specific legal context to be sustainable. The concepts of "green remediation" and "green and sustainable remediation" (so called GSR) that in some parts of the world are conflated with sustainable remediation are neither endorsed nor discussed in ISO 18504:2017.

  • Standard
    23 pages
    English language
    sale 15% off
  • Standard
    23 pages
    English language
    sale 15% off
  • Standard
    26 pages
    French language
    sale 15% off
ISO
ISO 17402:2008(Main)
Soil quality — Requirements and guidance for the selection and application of methods for the assessment of bioavailability of contaminants in soil and soil materials

ISO 17402:2008 provides guidance for the selection and application of methods to assess bioavailability for the characterisation of contaminated soil and soil materials. ISO 17402:2008 does not give a selection of the best applicable methods, but specifies boundary conditions and principles of methods to be used and gives the minimal requirements for the development of methods. The results obtained from such methods can be used as an estimate of bioavailability in a risk-assessment approach. The contaminants considered in ISO 17402:2008 are metals, including metalloids, and organic contaminants, including organometal compounds. This International Standard is also applicable to metals originating from natural geological and pedological processes (natural pedo-geochemical content). ISO 17402:2008 can also be applied to sediments.

  • Standard
    35 pages
    English language
    sale 15% off
  • Standard
    37 pages
    French language
    sale 15% off
ISO
ISO 18589-3:2023(Main)
Measurement of radioactivity in the environment — Soil — Part 3: Test method of gamma-emitting radionuclides using gamma-ray spectrometry

This document specifies the identification and the measurement of the activity in soils of a large number of gamma-emitting radionuclides using gamma spectrometry. This non-destructive method, applicable to large-volume samples (up to about 3 l), covers the determination in a single measurement of all the γ-emitters present for which the photon energy is between 5 keV and 3 MeV. Generic test method and fundamentals using gamma-ray spectrometry are described in ISO 20042. This document can be applied by test laboratories performing routine radioactivity measurements as a majority of gamma-emitting radionuclides is characterized by gamma-ray emission between 40 keV and 2 MeV. The method can be implemented using a germanium or other type of detector with a resolution better than 5 keV. This document addresses methods and practices for determining gamma-emitting radionuclides activity present in soil, including rock from bedrock and ore, construction materials and products, pottery, etc. This includes such soils and material containing naturally occurring radioactive material (NORM) or those from technological processes involving Technologically Enhanced Naturally Occurring Radioactive Materials (TENORM) (e.g. the mining and processing of mineral sands or phosphate fertilizer production and use) as well as of sludge and sediment. This determination of gamma-emitting radionuclides activity is typically performed for the purpose of radiation protection. It is suitable for the surveillance of the environment and the inspection of a site and allows, in case of accidents, a quick evaluation of gamma activity of soil samples. This might concern soils from gardens, farmland, urban or industrial sites that can contain building materials rubble, as well as soil not affected by human activities. When the radioactivity characterization of the unsieved material above 200 μm or 250 μm, made of petrographic nature or of anthropogenic origin such as building materials rubble, is required, this material can be crushed in order to obtain a homogeneous sample for testing as described in ISO 18589‑2.

  • Standard
    35 pages
    English language
    sale 15% off
  • Standard
    36 pages
    French language
    sale 15% off
  • Draft
    34 pages
    English language
    sale 15% off
  • Draft
    38 pages
    French language
    sale 15% off
ISO
ISO 18589-2:2022(Main)
Measurement of radioactivity in the environment — Soil — Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples

This document specifies the general requirements, based on ISO 11074 and ISO/IEC 17025, for all steps in the planning (desk study and area reconnaissance) of the sampling and the preparation of samples for testing. It includes the selection of the sampling strategy, the outline of the sampling plan, the presentation of general sampling methods and equipment, as well as the methodology of the pre-treatment of samples adapted to the measurements of the activity of radionuclides in soil including granular materials of mineral origin which contain NORM or artificial radionuclides, such as sludge, sediment, construction debris, solid waste of different type and materials from technologically enhanced naturally occurring radioactive materials (mining, coal combustion, phosphate fertilizer production etc.). For simplification, the term “soil” used in this document covers the set of elements mentioned above. This document is addressed to the people responsible for determining the radioactivity present in soil for the purpose of radiation protection. It is applicable to soil from gardens, farmland, urban, or industrial sites, as well as soil not affected by human activities. This document is applicable to all laboratories regardless of the number of personnel or the range of the testing performed. When a laboratory does not undertake one or more of the activities covered by this document, such as planning, sampling, test or calibration, the corresponding requirements do not apply. NOTE The term “laboratory” is applicable to all identified entities (individuals, organizations, etc.) performing planning, sampling, test and calibration.

  • Standard
    28 pages
    English language
    sale 15% off
  • Standard
    31 pages
    French language
    sale 15% off
ISO
ISO 23992:2022(Main)
Soil quality — Framework for detailed recording and monitoring of changes in dynamic soil properties

This document provides a framework for the detailed assessment and monitoring of dynamic soil properties related to soil function with concomitant recording of in-situ static soil properties, landscape, land use and soil management practices that influence function at the time the data were collected. It is applicable to the assessment of soil quality in agricultural landscapes, contaminated sites and natural soil ecosystems at plot, field and landscape spatial scales. It can also be applied in the development of dynamic properties databases to enhance existing soil survey databases for estimation of carbon stocks in soils, sustainable agriculture, landscape management etc. Although the soil quality description framework has been developed to describe surface soils, the same principles can be applied to adapt the framework to describe subsurface soil horizons.

  • Standard
    33 pages
    English language
    sale 15% off
  • Standard
    35 pages
    French language
    sale 15% off
ISO
ISO 23400:2021(Main)
Guidelines for the determination of organic carbon and nitrogen stocks and their variations in mineral soils at field scale

This document presents a method to quantify the soil organic carbon and nitrogen stocks in mineral soils at plot scale. It also provides guidance on how to detect and quantify simultaneously the variations of carbon and nitrogen stocks over time in mineral soils at field scale. It is based on several documents already published[2],[3],[4],[5],[6],[7],[8]. This document does not apply to organic soils, soils with permafrost, wetland soils, or to soil layers prone to submergence below the groundwater table. NOTE 1 The possibility of increasing soil C storage is viewed as a means to sequester atmospheric carbon dioxide (CO2) and mitigate greenhouse gas (GHG) emissions. Information on soil nitrogen (N) stocks is crucial because it interacts with carbon cycling through plant nutrition and organic matter decomposition, and leakage of N is of environmental concern (e.g. N2O emissions, NO3- leaching). Therefore, it is becoming increasingly important to measure accurately the impact of changes of land uses and practices on organic carbon and nitrogen stocks. NOTE 2 While understanding changes in soil inorganic carbon it is important also to understand the land-atmosphere exchange of CO2, measuring stocks of soil inorganic carbon is outside the scope of this document.

  • Standard
    21 pages
    English language
    sale 15% off
  • Standard
    23 pages
    French language
    sale 15% off
  • Draft
    21 pages
    English language
    sale 15% off
  • Draft
    24 pages
    French language
    sale 15% off
ISO
ISO 11074:2015/Amd 1:2020(Amendment)
Soil quality — Vocabulary — Amendment 1
  • Standard
    10 pages
    English language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off
ISO
ISO 18589-6:2019(Main)
Measurement of radioactivity in the environment — Soil — Part 6: Gross alpha and gross beta activities — Test method using gas-flow proportional counting

This document provides a method that allows an estimation of gross radioactivity of alpha- and beta-emitters present in soil samples. It applies, essentially, to systematic inspections based on comparative measurements or to preliminary site studies to guide the testing staff both in the choice of soil samples for measurement as a priority and in the specific analysis methods for implementation. The gross α or β radioactivity is generally different from the sum of the effective radioactivities of the radionuclides present since, by convention, the same alpha counting efficiency is assigned for all the alpha emissions and the same beta counting efficiency is assigned for all the beta emissions. Soil includes rock from bedrock and ore as well as construction materials and products, potery, etc. using naturally occurring radioactive materials (NORM) or those from technological processes involving Technologically Enhanced Naturally Occurring Radioactive Materials (TENORM), e.g. the mining and processing of mineral sands or phosphate fertilizer production and use. The test methods described in this document can also be used to assess gross radioactivity of alpha- and beta-emitters in sludge, sediment, construction material and products following proper sampling procedure[2][3][4][5][7][8]. For simplification, the term "soil" used in this document covers the set of elements mentioned above.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off