ISO 9413:2012/Amd 1:2012

Tyre valves — Dimensions and designation — Amendment 1

Valves pour pneumatiques — Dimensions et désignation — Amendement 1

General Information

• Status: Withdrawn
• Publication Date: 23-Sep-2012
• Withdrawal Date: 23-Sep-2012
• ICS: 83.160.01 - Tyres in general
• Technical Committee: ISO/TC 31/SC 9 - Valves for tube and tubeless tyres
• Drafting Committee: ISO/TC 31/SC 9 - Valves for tube and tubeless tyres
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 18-Nov-2019

Relations

• Revised: ISO 9413:2019 - Tyre valves — Dimensions and designation
• Effective Date: 10-Dec-2016
• Amends: ISO 9413:2012 - Tyre valves — Dimensions and designation
• Effective Date: 28-Aug-2021

Standards Content (Sample)

INTERNATIONAL ISO

STANDARD 9413
NORME
Second edition
Deuxième édition
INTERNATIONALE
2012-02-15
AMENDMENT 1
AMENDEMENT 1
2012-10-01

Tyre valves — Dimensions and
designation
AMENDMENT 1
Valves pour pneumatiques — Dimensions
et désignation
AMENDEMENT 1






Reference number
Numéro de référence
ISO 9413:2012/Amd.1:2012(E/F)
©
ISO 2012

---------------------- Page: 1 ----------------------
ISO 9413:2012/Amd.1:2012(E/F)

COPYRIGHT PROTECTED DOCUMENT
DOCUMENT PROTÉGÉ PAR COPYRIGHT


©  ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester. / Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris
la photocopie et les microfilms, sans l'accord écrit de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du
demandeur.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland/Publié en Suisse

ii © ISO 2012 – All rights reserved/Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 9413:2012/Amd.1:2012(E/F)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to ISO 9413:2012 was prepared by Technical Committee ISO/TC 31, Tyres, rims and valves,
Subcommittee SC 9, Valves for tube and tubeless tyres.

© ISO 2012 – All rights reserved/Tous droits réservés iii

---------------------- Page:
...