ISO 1096:2014

Plywood - Classification

ISO 1096:2013 provides systems of classification of plywood panels based on general appearance and principal characteristics.

Contreplaqué — Classification

General Information

• Status: Withdrawn
• Publication Date: 21-Jan-2014
• Withdrawal Date: 21-Jan-2014
• ICS: 79.060.10 - Plywood
• Technical Committee: ISO/TC 89/SC 3 - Plywood
• Drafting Committee: ISO/TC 89/SC 3 - Plywood
• Current Stage: 9599 - Withdrawal of International Standard
• Start Date: 31-May-2021
• Completion Date: 13-Dec-2025

Relations

• Revised: ISO 1096:2021 - Plywood - Classification
• Effective Date: 23-Apr-2020
• Revises: ISO 1096:1999 - Plywood - Classification
• Effective Date: 03-Dec-2011

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 1096
Third edition
2014-02-01
Plywood — Classification
Contreplaqué — Classification
Reference number
©
ISO 2014
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

Contents  Page
Foreword .iv
1  Scope . 1
2  Normative references . 1
3  Classification . 1
3.1 General . 1
3.2 General description . 1
3.3 Principal characteristics . 2
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (se
...