Road vehicles — Tachograph systems — Part 7: Parameters

This document specifies the parameters used on the service interface of the recording equipment. Some of them are specified in detail in this document, while others are given in the ISO 14299 series.

Véhicules routiers — Systèmes tachygraphes — Partie 7: Paramètres

General Information

Status
Published
Publication Date
02-May-2022
Current Stage
6060 - International Standard published
Start Date
03-May-2022
Due Date
29-Apr-2022
Completion Date
03-May-2022
Ref Project

Relations

Buy Standard

Standard
ISO 16844-7:2022 - Road vehicles — Tachograph systems — Part 7: Parameters Released:5/3/2022
English language
56 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 16844-7
Third edition
2022-05
Road vehicles — Tachograph
systems —
Part 7:
Parameters
Véhicules routiers — Systèmes tachygraphes —
Partie 7: Paramètres
Reference number
ISO 16844-7:2022(E)
© ISO 2022

---------------------- Page: 1 ----------------------
ISO 16844-7:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2022 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 16844-7:2022(E)
Contents Page
Foreword .vii
Introduction .viii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviated terms.1
5 Identifier specification for diagnostic services . 2
5.1 Data identifiers (DID) . 2
5.2 Routine identifiers (RID) . 6
6 Parameters and values .7
6.1 Transmitted parameter ranges . 7
6.2 Structured parameters . 7
6.3 Date and time parameter specifications . 7
6.3.1 Day . 7
6.3.2 Month . . . 7
6.3.3 Year . 7
6.4 Parameter specifications . 7
6.4.1 Standard revision . 7
6.4.2 VIN — VehicleIdentificationNumber . 8
6.4.3 Trip group 1 . 8
6.4.4 System event . 8
6.4.5 Handling information. 8
6.4.6 Tachograph performance . 9
6.4.7 Direction indicator . 9
6.4.8 Requested illumination percentage . 9
6.4.9 Switch backlight illumination brightness per cent . 9
6.4.10 Switch indication illumination brightness per cent . 9
6.4.11 RSDST — RemoteSessionDiagnosticSessionType . 9
6.4.12 TVS — TachographVehicleSpeed . . 9
6.4.13 D1WS — Driver1WorkingState . 10
6.4.14 D2WS — Driver2WorkingState . 10
6.4.15 DR — DriveRecognize . . 10
6.4.16 D1TRS — Driver1TimeRelatedStates . . 11
6.4.17 D2TRS — Driver2TimeRelatedStates . 11
6.4.18 DCD1 — DriverCardDriver1 .12
6.4.19 DCD2 — DriverCardDriver2 .12
6.4.20 OS — Overspeed .12
6.4.21 TD — TimeDate .13
6.4.22 RHM — ResetHeartbeatMessage . 13
6.4.23 ALMO — AdjustLocalMinuteOffset . 13
6.4.24 ALHO — AdjustLocalHourOffset . 14
6.4.25 PLOTM — PriorityLevelOfTCO1Message . 14
6.4.26 HRTVD — HighResolutionTotalVehicleDistance . 14
6.4.27 HRTD — HighResolutionTripDistance . 14
6.4.28 SCI — ServiceComponentIdentification . 15
6.4.29 SDCTB — ServiceDelayCalendarTimeBased . 15
6.4.30 D1I — Driver1Identification . 16
6.4.31 D2I — Driver2Identification . 16
6.4.32 KF — KFactor . 16
6.4.33 SMR — SpeedMeasurementRange . 17
6.4.34 NOTOPW — NumberOfTeethOnPhonicWheel . 17
6.4.35 TOSS — TachographOutputShaftSpeed . 17
iii
© ISO 2022 – All rights reserved

---------------------- Page: 3 ----------------------
ISO 16844-7:2022(E)
6.4.36 LFTC — LFactorTyreCircumference . 18
6.4.37 WVCF — WVehicleCharacteristicFactor . 18
6.4.38 PPROOS — PulsesPerRevolutionOfOutputShaft . 18
6.4.39 TRROTM — TransmissionRepetitionRateOfTCO1Message . 19
6.4.40 TS — TyreSize . 19
6.4.41 NCD — NextCalibrationDate. 19
6.4.42 D1CDT — Driver1ContinuousDrivingTime . 19
6.4.43 D2CDT — Driver2ContinuousDrivingTime . 20
6.4.44 D1CBT — Driver1CumulativeBreakTime . 20
6.4.45 D2CBT — Driver2CumulativeBreakTime . 20
6.4.46 D1CDOSA — Driver1CurrentDurationOfSelectedActivity . 21
6.4.47 D2CDOSA — Driver2CurrentDurationOfSelectedActivity . 21
6.4.48 SA — SpeedAuthorised . 21
6.4.49 TCS1 — TachographCardSlot1 . 22
6.4.50 TCS2 — TachographCardSlot2 . 22
6.4.51 D1N — Driver1Name . 22
6.4.52 D2N — Driver2Name .23
6.4.53 OOSC — OutOfScopeCondition . 23
6.4.54 MOD — ModeOfOperation . 24
6.4.55 D1CDTPACW — Driver1CumulatedDrivingTimePreviousAndCurrentWeek . 24
6.4.56 D2CDTPACW — Driver2CumulatedDrivingTimePreviousAndCurrentWeek . 24
6.4.57 RTSP — RealTimeSpeedPulses . 25
6.4.58 ES — EngineSpeed .25
6.4.59 CIO — CalibrationInputOutput . 25
6.4.60 SJW — SynchronizationJumpWidth . 26
6.4.61 SP — SamplePoint . 27
6.4.62 TOMED — TimeOutMessageErrorDelay . 27
6.4.63 EMII — ErrorManagementInitialisationInhibition . 27
6.4.64 RMS — RegisteringMemberState .28
6.4.65 VRN — VehicleRegistrationNumber . .28
6.4.66 VRD — VehicleRegistrationDate .28
6.4.67 D1PL — Driver1PreferredLanguage .29
6.4.68 D2PL — Driver2PreferedLanguage .29
6.4.69 DC1DTP — DriverCard1DownloadTimePeriod .29
6.4.70 DC2DTP — DriverCard2DownloadTimePeriod.30
6.4.71 TDTP — TachographDownloadTimePeriod .30
6.4.72 DHRPWTD — DriversHoursRulesPreWarningTimeDelay .30
6.4.73 DCEWTD — DriverCardExpiryWarningTimeDelay . 31
6.4.74 NDC1DWTD — NextDriverCard1DownloadWarningTimeDelay . . 31
6.4.75 NDC2DWTD — NextDriverCard2DownloadWarningTimeDelay . 31
6.4.76 NTDWTD — NextTachographDownloadWarningTimeDelay . 32
6.4.77 NCWTD — NextCalibrationWarningTimeDelay. 32
6.4.78 D1EOLDRP — Driver1EndOfLastDailyRestPeriod . 32
6.4.79 D2EOLDRP — Driver2EndOfLastDailyRestPeriod . 33
6.4.80 D1EOLWRP — Driver1EndOfLastWeeklyRestPeriod . 33
6.4.81 D2EOLWRP — Driver2EndOfLastWeeklyRestPeriod .33
6.4.82 D1EOSLWRP — Driver1EndOfSecondLastWeeklyRestPeriod.33
6.4.83 D2EOSLWRP — Driver2EndOfSecondLastWeeklyRestPeriod.34
6.4.84 D1CDDT — Driver1CurrentDailyDrivingTime .34
6.4.85 D2CDDT — Driver2CurrentDailyDrivingTime .34
6.4.86 D1CWDT — Driver1CurrentWeeklyDrivingTime . 35
6.4.87 D2CWDT — Driver2CurrentWeeklyDrivingTime . . 35
6.4.88 D1TLUNDRP — Driver1TimeLeftUntilNewDailyRestPeriod . 35
6.4.89 D2TLUNDRP — Driver2TimeLeftUntilNewDailyRestPeriod . 35
6.4.90 D1CED — Driver1CardExpiryDate .36
6.4.91 D2CED — Driver2CardExpiryDate . .36
6.4.92 D1CNMDD — Driver1CardNextMandatoryDownloadDate .36
6.4.93 D2CNMDD — Driver2CardNextMandatoryDownloadDate . . 37
iv
  © ISO 2022 – All rights reserved

---------------------- Page: 4 ----------------------
ISO 16844-7:2022(E)
6.4.94 TNMDD — TachographNextMandatoryDownloadDate . 37
6.4.95 D1TLUNWRP — Driver1TimeLeftUntilNewWeeklyRestPeriod . 37
6.4.96 D2TLUNWRP — Driver2TimeLeftUntilNewWeeklyRestPeriod .38
6.4.97 D1NOT9HDDTE — Driver1NumberOfTimes9hDailyDrivingTimesExceeded .38
6.4.98 D2NOT9HDDTE — Driver2NumberOfTimes9hDailyDrivingTimesExceeced .38
6.4.99 D1CURT — Driver1CumulativeUninterruptedRestTime .39
6.4.100 D2CURT — Driver2CumulativeUninterruptedRestTime .39
6.4.101 D1MDR — Driver1MinimumDailyRest .39
6.4.102 D2MDR — Driver2MinimumDailyRest .39
6.4.103 D1MWR — Driver1MinimumWeeklyRest .40
6.4.104 D2MWR — Driver2MinimumWeeklyRest .40
6.4.105 D1MDP — Driver1MaximumDailyPeriod .40
6.4.106 D2MDP — Driver2MaximumDailyPeriod . 41
6.4.107 D1MDDT — Driver1MaximumDailyDrivingTime . 41
6.4.108 D2MDDT — Driver2MaximumDailyDrivingTime . 41
6.4.109 D1NOURDRP — Driver1NumberOfUsedReducedDailyRestPeriods. 42
6.4.110 D2NOURDRP — Driver2NumberOfUsedReducedDailyRestPeriods. 42
6.4.111 D1RCDT — Driver1RemainingCurrentDrivingTime . 42
6.4.112 D2RCDT — Driver2RemainingCurrentDrivingTime . 43
6.4.113 D1RDTOCS — Driver1RemainingDrivingTimeOnCurrentShift . 43
6.4.114 D2RDTOCS — Driver2RemainingDrivingTimeOnCurrentShift . 43
6.4.115 D1RDTOCW — Driver1RemainingDrivingTimeOfCurrentWeek . 43
6.4.116 D2RDTOCW — Driver2RemainingDrivingTimeOfCurrentWeek .44
6.4.117 D1R2WDT — Driver1Remaining2WeeksDrivingTime .44
6.4.118 D2R2WDT — Driver2Remaining2WeeksDrivingTime .44
6.4.119 D1TLUNDP — Driver1TimeLeftUntilNextDrivingPeriod . 45
6.4.120 D2TLUNDP — Driver2TimeLeftUntilNextDrivingPeriod . 45
6.4.121 D1DONDP — Driver1DurationOfNextDrivingPeriod . 45
6.4.122 D2DONDP — Driver2DurationOfNextDrivingPeriod .46
6.4.123 D1DONBR — Driver1DurationOfNextBreakRest .46
6.4.124 D2DONBR — Driver2DurationOfNextBreakRest .46
6.4.125 D1RTOCBR — Driver1RemainingTimeOfCurrentBreakRest .46
6.4.126 D2RTOCBR — Driver2RemainingTimeOfCurrentBreakRest . 47
6.4.127 D1RTUNBOR — Driver1RemainingTimeUntilNextBreakOrRest . . 47
6.4.128 D2RTUNBOR — Driver2RemainingTimeUntilNextBreakOrRest. 47
6.4.129 D1OCITLW — Driver1OpenCompensationInTheLastWeek .48
6.4.130 D2OCITLW — Driver2OpenCompensationInTheLastWeek .48
6.4.131 D1OCIWBL — Driver1OpenCompensationInWeekBeforeLast .48
6.4.132 D2OCIWBL — Driver2OpenCompensationInWeekBeforeLast .49
6.4.133 D1OCI2WBL — Driver1OpenCompensationIn2ndWeekBeforeLast .49
6.4.134 D2OCI2WBL — Driver2OpenCompensationIn2ndWeekBeforeLast .49
6.4.135 D1AI — Driver1AdditionalInformation.49
6.4.136 D2AI — Driver2AdditionalInformation. 51
6.4.137 MSSN – MotionSensorSerialNumber . 51
6.4.138 RCFSN – RemoteCommunicationFacilitySerialNumber . 51
6.4.139 EGNSSFSN – ExternalGNSSFacilitySerialNumber . 51
6.4.140 STSSN - SmartTachographSealsSerialNumber . 52
6.4.141 VSN – VuSerialNumber . 52
6.4.142 BDLT – ByDefaultLoadType . 52
6.4.143 TCG1S - TachographCardsGen1Suppression . 52
6.4.144 VP – VehiclePosition . 53
6.4.145 CC – CalibrationCountry . 53
6.4.146 D1TLLUO - Driver1TimeLastLoadUnloadOperation .53
6.4.147 D2TLLUO - Driver2TimeLastLoadUnloadOperation .54
6.4.148 DCOPD - DriversConsentOnPrivateData .54
6.4.149 FTS —FerryTrainStatus .54
7 DTCs for tachograph system .55
v
© ISO 2022 – All rights reserved

---------------------- Page: 5 ----------------------
ISO 16844-7:2022(E)
Bibliography .56
vi
  © ISO 2022 – All rights reserved

---------------------- Page: 6 ----------------------
ISO 16844-7:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 22, Road vehicles, Subcommittee SC 31,
Data communication.
This third edition cancels and replaces the second edition (ISO 16844-7:2015), which has been
technically revised.
The main changes are as follows:
— part 5 of this series (ISO 16844-5) has been removed due to its technical irrelevance,
— correction of the typos and mistakes in the text,
— adoption of the content according to the new version of the ISO guidelines,
— adoption of the content according to the new technical requirements,
— alignment of the content regarding to the referred standards.
A list of all parts in the ISO 16844 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
vii
© ISO 2022 – All rights reserved

---------------------- Page: 7 ----------------------
ISO 16844-7:2022(E)
Introduction
This document supports and facilitates the communication between electronic control units (ECUs)
and a digital tachograph.
The digital tachograph concept is based upon a recording equipment storing data, related to the
activities of the various drivers driving the vehicle, on which it is installed.
During the normal operational status of the recording equipment, data stored in its memory are
accessible to different entities (drivers, authorities, workshops, transport companies) in different ways
(displayed on a screen, printed by a printing device, downloaded to an external device). Access to stored
data are controlled by a smart card inserted in the tachograph.
A typical tachograph system is shown in Figure 1.
Key
1 data and service IF connector standardized in 4 CAN-based data IF including parameter groups
ISO 16844-1 standardized in ISO 16844-4
2 electrical data and service IF requirements 5 optional CAN-based service IF standardized in
standardized in ISO 16844-2 ISO 16884-6
3 comm
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.