Road vehicles — Tachograph systems — Part 1: Electromechanical components

This document specifies the mechanical dimensions of mandatory connectors and optional connectors used by the recording equipment for the data and the service interfaces. This includes, in particular, the connection to the CAN-based in-vehicle networks.

Véhicules routiers — Systèmes tachygraphes — Partie 1: Composants électromécaniques

General Information

Status
Published
Publication Date
24-Feb-2022
Current Stage
6060 - International Standard published
Start Date
25-Feb-2022
Due Date
15-Oct-2021
Completion Date
25-Feb-2022
Ref Project

Relations

Buy Standard

Standard
ISO 16844-1:2022 - Road vehicles — Tachograph systems — Part 1: Electromechanical components Released:2/25/2022
English language
6 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 16844-1
Third edition
2022-02
Road vehicles — Tachograph
systems —
Part 1:
Electromechanical components
Véhicules routiers — Systèmes tachygraphes —
Partie 1: Composants électromécaniques
Reference number
ISO 16844-1:2022(E)
© ISO 2022

---------------------- Page: 1 ----------------------
ISO 16844-1:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2022 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 16844-1:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms . 1
5 Connector dimensions .1
6 Contact allocation . 3
6.1 Connector parts A and B . 3
6.2 Connector parts C and D . 4
7 Performance — Tests and requirements . 4
7.1 General . 4
7.2 Temperature/humidity cycling . 5
7.3 Combined temperature/vibration . 5
7.4 Dielectric strength . 5
7.5 Mechanical shock and chemical fluids . 5
Bibliography . 6
iii
© ISO 2022 – All rights reserved

---------------------- Page: 3 ----------------------
ISO 16844-1:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 22, Road vehicles, Subcommittee SC 31,
Data communication.
This third edition cancels and replaces the second edition (ISO 16844-1:2013), which has been
technically revised.
The main changes are as follows:
— part 5 of this series (ISO 16844-5) has been removed due to its technical irrelevance,
— correction of the typos and mistakes in the text,
— adoption of the content according to the new version of the ISO guidelines,
— adoption of the content according to the new technical requirements,
— alignment of the content regarding to the referred standards.
A list of all parts in the ISO 16844 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
  © ISO 2022 – All rights reserved

-----------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.