Abstract

This document provides guidelines for very small entities (VSEs) who want to reinforce their agile/DevOps environment to develop and support software using an agile approach with practices of the ISO/IEC 29110 series. This document is applicable to VSEs that do not develop safety-critical products.

Status
Published
Publication Date
15-Nov-2026
Current Stage
6060 - International Standard published
Start Date
16-Nov-2026
Completion Date
16-Nov-2026

Buy Documents

Standard

ISO/IEC 29110-5-5:2026 - Systems and software engineering — Life cycle profiles for very small entities (VSEs) — Part 5-5: Agile/DevOps guidelines

Release Date:16-Nov-2026
English language (83 pages)
sale 15% off
Preview
sale 15% off
Preview

ISO/IEC 29110-5-5:2026 is an ISO/IEC International Standard for systems and software engineering. It gives Agile/DevOps guidelines for very small entities (VSEs) that want to reinforce an agile/DevOps environment to develop and support software using practices from the ISO/IEC 29110 series. It is a guidance document, not a requirements specification, and it is intended for VSEs that do not develop safety-critical products.

What does ISO/IEC 29110-5-5:2026 specify?

ISO/IEC 29110-5-5:2026 specifies how a VSE can organize agile software development and ongoing support around the Basic profile of ISO/IEC 29110, with DevOps practices added where they help delivery and support. The document is practical guidance for small teams, and it is built mainly from scrum, XP and DevOps concepts.

The scope is limited to software work in VSEs that do not develop safety-critical products. Clause 5 gives the overview, Clause 6 describes the agile/DevOps processes and events, Clause 7 describes roles, and Clause 8 describes the work products and their states.

AnnexWhat it covers
Annex AExample work product templates such as burndown and burnup charts, product backlog, user stories, operational requirements, task board and incident record
Annex BOverview of popular agile methods
Annex CExtending agile practices into DevOps for development and support
Annex DHow the guidelines for reinforcing an agile environment were developed
Annex EMapping between ISO/IEC 29110-5-5 and ISO/IEC/IEEE 32675
Annex FMeasures and guidance for reinforcing an agile/DevOps environment

What are the key requirements of ISO/IEC 29110-5-5:2026?

ISO/IEC 29110-5-5:2026 is a guidance standard, so its substance is a set of recommended practices rather than mandatory requirements. The document tells a VSE what to do in the project flow, which work products to use, and how to keep development and support aligned.

How the document structures the work

Clause 4 defines the notation used throughout the standard. It distinguishes process names, process outcomes, events, tasks, input and output work products, internal work products, roles and diagrams, so a reader can follow the process maps and tables consistently.

Clause 6 organizes the work into eight events: project vision meeting, estimation meeting, sprint planning, sprint, daily scrum, sprint review, sprint retrospective and software support. These events cover planning, building, checking, adapting and supporting the software, which matters because small teams need a simple, repeatable rhythm.

The events are linked to named outcomes such as PM.O1 and SIS.O8. That gives the team a way to see why each event exists and what result it supports, instead of treating the meetings as stand-alone ceremonies.

Which roles matter most

Clause 5.4 and Clause 7 identify five main roles: Customer, Product owner, Scrum lead, DevOps team and DevOps specialist. The standard also notes that one person can play more than one role, which is practical for a VSE.

The role descriptions explain the competencies expected in a small team. For example, the Customer or Product owner approves requirements and changes, the Scrum lead facilitates the Scrum process and removes impediments, and the DevOps team carries the development and support work.

Which work products and states matter most

Clause 8 defines the work products used in the process and the states they can have. The most important ones for day-to-day control are the mission statement, project plan, product backlog, sprint backlog, change request, repository, traceability record, test report, verification record and validation record.

The state model is important in practice because it tells the team what is ready to use next. States such as initiated, verified, approved, updated, baselined, tested and done let the team track whether a work product is still being worked on, has been checked, or is ready for delivery or production use.

What the DevOps guidance adds

Annex C extends the agile flow into DevOps so the team can think about development, build, deployment, monitoring and support together. The document highlights automation, continuous integration, deployment and rollback, plus the need to consider the production or production-like environment early.

Annex D sets out a few ground rules that matter in practice: create the project repository before the project starts, register changes in a change request, keep traceability for implemented requirements, and define the definition of done (DoD) so the team knows when work can move to baseline. Those rules help a small team avoid informal decisions that are hard to track later.

Annex F gives measures for monitoring the project and support work, including lead time, velocity, work in progress, code coverage, defect density, deployment frequency, mean lead time for changes, mean time to recovery and change failure rate. These measures help a VSE judge whether the process is becoming faster, more stable and easier to support.

What terms does ISO/IEC 29110-5-5:2026 define?

  • Very small entity (VSE) - An enterprise, organization, department or project with up to 25 people.
  • Agile environment - The culture, infrastructure and methods that support agile development.
  • Product backlog - An ordered list of what is needed to improve the product, and the single source of work for the agile team.
  • Definition of done (DoD) - A statement of the quality attributes that work must meet before it is ready for use; in DevOps it includes deployment to production or a production-like environment.
  • DevOps - A set of principles and practices that improve collaboration for specifying, developing, operating and continuously improving software and systems products and services.
  • Sprint - A short time frame in which a set of software features is developed into a working product that can be shown to stakeholders.
  • Acceptance criteria - The working agreement on the required quality attribute that work must meet before a story, feature, item or artefact is complete.
  • Safety-critical product - Software whose failure or malfunction can cause death or serious injury, severe equipment or property damage, or environmental harm.

Who uses ISO/IEC 29110-5-5:2026?

ISO/IEC 29110-5-5:2026 is used by VSEs that develop or support software and want a lightweight way to combine agile work with DevOps practices. It is especially relevant for small teams that need clearer planning, change control, traceability and support handling without building a large process framework.

The main users are:

  • VSE owners, project managers and team leads who need a practical project structure.
  • Product owners and customers who define, approve and accept requirements and deliverables.
  • Scrum leads, developers, testers and DevOps specialists who carry out the events and maintain the work products.
  • Assessors and auditors who review whether a VSE follows an ISO/IEC 29110 profile in practice.

Which standards are used with ISO/IEC 29110-5-5:2026?

StandardWhat it contributes
ISO/IEC 29110-1-2Vocabulary used in the terms and definitions clause
ISO/IEC 29110-5-1-2The software Basic profile that this part adapts with agile/DevOps guidance
ISO/IEC 29110-4-1The software Basic profile referenced in the introduction as a process model VSEs can follow
ISO/IEC/IEEE 32675:2022The DevOps base standard used for the mapping in Annex E and as the main DevOps reference
ISO/IEC/IEEE 12207:2017Software life cycle process source for several terms and the broader software engineering context
ISO/IEC/IEEE 15288Systems life cycle process reference named in the introduction as part of the wider ISO/IEC 29110 framework
ISO/IEC/IEEE 15289Life-cycle information items reference named in the introduction as part of the wider framework

What does the ISO/IEC 29110-5-5:2026 document contain?

ISO/IEC 29110-5-5:2026 contains process overviews, event-by-event task descriptions, role descriptions and detailed work product descriptions for agile/DevOps software work. Clause 6 breaks the flow into eight events, and Clauses 7 and 8 define who does the work and which artefacts are produced.

The document also contains tables of work product states and work product definitions, including planning, backlog, repository, testing, traceability and support records. Annex A adds example templates, Annex B summarizes agile methods, Annex C explains the DevOps extension, Annex E maps the guidance to ISO/IEC/IEEE 32675, and Annex F gives monitoring measures and formulas used for project and support tracking.

Buy Documents

Standard

ISO/IEC 29110-5-5:2026 - Systems and software engineering — Life cycle profiles for very small entities (VSEs) — Part 5-5: Agile/DevOps guidelines

Release Date:16-Nov-2026
English language (83 pages)
sale 15% off
Preview
sale 15% off
Preview

Get Certified

Connect with accredited certification bodies for this standard

BSI Group

BSI (British Standards Institution) is the business standards company that helps organizations make excellence a habit.

UKAS United Kingdom Verified

BSCIC Certifications Pvt. Ltd.

Established 2006, accredited by NABCB, JAS-ANZ, EIAC, IAS. CDSCO Notified Body.

NABCB India Verified

Intertek India Pvt. Ltd.

Delivers Assurance, Testing, Inspection & Certification since 1993 with 26 labs and 32 offices.

NABCB India Verified

Sponsored listings

Frequently Asked Questions

ISO/IEC 29110-5-5:2026 is a standard published by the International Organization for Standardization (ISO). Its full title is "Systems and software engineering — Life cycle profiles for very small entities (VSEs) — Part 5-5: Agile/DevOps guidelines". This standard covers: This document provides guidelines for very small entities (VSEs) who want to reinforce their agile/DevOps environment to develop and support software using an agile approach with practices of the ISO/IEC 29110 series. This document is applicable to VSEs that do not develop safety-critical products.

This document provides guidelines for very small entities (VSEs) who want to reinforce their agile/DevOps environment to develop and support software using an agile approach with practices of the ISO/IEC 29110 series. This document is applicable to VSEs that do not develop safety-critical products.

ISO/IEC 29110-5-5:2026 is classified under the following ICS (International Classification for Standards) categories: 35.080 - Software. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO/IEC 29110-5-5:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


International
Standard
ISO/IEC 29110-5-5
First edition
Systems and software
2026-11
engineering — Life cycle profiles for
very small entities (VSEs) —
Part 5-5:
Agile/DevOps guidelines
Ingénierie des systèmes et du logiciel — Profils de cycle de vie
pour très petits organismes (TPO) —
Partie 5-5: Lignes directrices Agile/DevOps
Reference number
© ISO/IEC 2026
All rights reserved.
This ISO publication is protected by copyright and is owned by ISO and/or its licensors.
The content of this ISO publication is provided under licence, not sold. Use is subject to the applicable licence terms issued by ISO,
an ISO member body, or an authorized third-party distributor.
Except as required for implementation or expressly permitted by a separate licence, no part of this ISO publication may be
reproduced, distributed, modified, used, or made available in any form or by any means – electronic or mechanical, including
photocopying, scanning, recording, or posting on internal or external digital platforms.
Any use beyond the scope of the granted rights is prohibited and may result in legal action.
ISO copyright office
CP 401 • CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
© ISO/IEC 2026 – All rights reserved
ii
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3  Terms, definitions and abbreviated terms . 1
3.1 Terms and definitions .1
3.2 Abbreviated terms .8
4  Naming, diagramming and definition conventions . 8
5 Overview . 9
5.1 General .9
5.2 Project management process of the Basic profile and the agile/DevOps events
performed to manage the project .10
5.3 Software implementation process of the Basic profile and the agile/DevOps events
performed to implement the project and provide ongoing support .10
5.4 Roles involved.11
6 Agile/DevOps software development and support process .11
6.1 General .11
6.2 Agile/DevOps project management process .11
6.2.1 Agile/DevOps project management process purpose.11
6.2.2 Agile/DevOps project management process outcomes . 12
6.2.3 Overview of the agile/DevOps project management process . 12
6.3 Agile/DevOps software implementation and support process . 13
6.3.1 Agile/DevOps software implementation and support process purpose. 13
6.3.2 Agile/DevOps software implementation process outcomes . 13
6.3.3 Overview of the agile/DevOps software implementation and support process .14
6.4 Event 1 - project vision meeting (contributes to outcome PM.O1) .16
6.4.1 Justification .16
6.4.2 Overview of event 1- project vision meeting .16
6.4.3 Tasks of event 1 - project vision meeting .16
6.5 Event 2 - estimation meeting (contributes to outcomes PM.O1, PM.O5, SIS.08) .19
6.5.1 Justification .19
6.5.2 Overview of event 2 - estimation meeting .19
6.5.3 Tasks of event 2 - estimation meeting . 20
6.6 Event 3 - sprint planning (contributes to outcomes PM.O1, PM.O2, PM.O4, PM.O7, SIS.
O1, SIS.O3, SIS.O5, SIS.08) . 22
6.6.1 Justification . 22
6.6.2 Overview of event 3 – sprint planning . 22
6.6.3 Tasks of event 3 – sprint planning . 22
6.7 Event 4 – sprint (contributes to outcomes PM.O2 PM.O3, SIS.O3, SIS.O4, SIS.O5, SIS.O7,
SIS.O8) . 26
6.7.1 Justification . 26
6.7.2 Overview of event 4 – sprint . 26
6.7.3 Tasks of event 4 - sprint .27
6.8 Event 5 - daily scrum (contributes to outcomes PM.O2, PM.O4, PM.O5, PM.O7, SIS.O8) .31
6.8.1 Justification .31
6.8.2 Overview of event 5 - daily scrum .31
6.8.3 Tasks of event 5 - daily scrum .31
6.9 Event 6 - sprint review (contributes to outcomes PM.O2, PM.O3, PM.O4, SIS04, SIS.05,
SIS.O7) . 33
6.9.1 Justification . 33
6.9.2 Overview of event 6 – sprint review . 33
6.9.3 Tasks of event 6 – sprint review . 33

© ISO/IEC 2026 – All rights reserved
iii
6.10 Event 7 - sprint retrospective (contributes to outcomes PM.O2, PM.O3, PM.O4, PM.O7,
SIS.O8) . 36
6.10.1 Justification . 36
6.10.2 Overview of event 7 – sprint retrospective . 36
6.10.3 Tasks of event 7 – sprint retrospective . 36
6.11 Event 8 – software support (contributes to outcomes PM.O2, PM.O3, PM.O4, PM.O7, SIS.
O5, SIS.O6, SIS.O7, SIS.O.8) . 38
6.11.1 Justification . 38
6.11.2 Overview of event 8 – software support . 38
6.11.3 Tasks of event 8 – software support . 40
7 Role descriptions . 41
8 Work product descriptions .43
Annex A (informative) Examples of work product templates .64
Annex B (informative) Overview of popular agile methods .69
Annex C (informative) Extending agile practices into DevOps to deliver development and
support .71
Annex D (informative) Development of guidelines for the reinforcement of an agile environment . 74
Annex E (informative)  Mapping between ISO/IEC 29110-5-5 and ISO/IEC/IEEE 32675 .77
Annex F (informative) Guidelines for the reinforcement of an agile/DevOps environment .79
Bibliography .82

© ISO/IEC 2026 – All rights reserved
iv
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical activity.
ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations,
governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria required for the different types
of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/
IEC Directives, Part 2 (see www.iso.org/directives or www.iec.ch/members_experts/refdocs).
ISO and IEC draw attention to the possibility that the implementation of this document may involve the
use of (a) patent(s). ISO and IEC take no position concerning the evidence, validity or applicability of any
claimed patent rights in respect thereof. As of the date of publication of this document, ISO and IEC had not
received notice of (a) patent(s) which may be required to implement this document. However, implementers
are cautioned that this may not represent the latest information, which may be obtained from the patent
database available at www.iso.org/patents and https://patents.iec.ch. ISO and IEC shall not be held
responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html.
In the IEC, see www.iec.ch/understanding-standards.
This document was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 7, Software and systems engineering.
A list of all parts in the ISO/IEC 29110 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

© ISO/IEC 2026 – All rights reserved
v
Introduction
0.1  Introduction to the ISO/IEC29110 series
For the purpose of the ISO/IEC 29110 series, a very small entity (VSE) is an enterprise, organization (e.g.
government agency, non-profit organization), department or project having up to 25 people. Since many
VSEs develop and/or maintain systems and the software components used in those systems, either as
independent products or incorporated in a larger system, a recognition of VSEs as suppliers of high-quality
products is required.
VSEs around the world are creating valuable products and services. According to the World Bank, small
.
and medium-sized enterprises (SMEs) account for about 90 % of enterprises worldwide According to the
Organisation for Economic Co-operation and Development (OECD), SMEs represent 99 % of all businesses
.
and generate about 60 % of employment Almost one person out of three is employed in a micro firm with
less than 10 employees. The European Union reports that micro firms, with fewer than 10 persons, account
for 93,5 % of all enterprises and small firms, with 10 to 49 employees, account for 5,5 % of all enterprises.
With such a large proportion of business activity carried out by VSEs, their participation in the economy
is key to United Nations Sustainable Development Goal 8 – to promote inclusive and sustainable economic
growth and decent work for all. The challenge facing governments is to provide a business environment that
supports the competitiveness of this large heterogeneous business population and that promotes a vibrant
entrepreneurial culture.
From studies and surveys conducted, the majority of International Standards do not address the needs of
VSEs. Implementation of and conformity with these standards is difficult, if not impossible.
Consequently, VSEs have no, or very limited, ways to be recognized as entities that produce quality systems/
system elements including software in their domain. Therefore, VSEs are excluded from some economic
activities.
It has been found that VSEs find it difficult to relate International Standards to their business needs and
to justify the effort required to apply standards to their business practices. Most VSEs find it helpful to
have specified procedures appropriate to their size when beginning agile projects, rather than attempting
to interpret and tailor the more flexible, high-level process requirements of ISO/IEC/IEEE. To address
some of these difficulties, a set of guidelines have been developed based on a set of VSEs characteristics.
The guidelines are based on subsets of appropriate standards processes, activities, tasks, and outcomes,
referred to as profiles. The purpose of a profile is to define a subset of International Standards relevant to
the VSEs' context, for example, processes, activities, tasks, and outcomes of ISO/IEC/IEEE 12207 for software
systems; and processes of ISO/IEC/IEEE 32675:2022 for DevOps practices; and processes, activities,
tasks, and outcomes of ISO/IEC/IEEE 15288 for systems and information products (documentation) of
ISO/IEC/IEEE 15289 for software and systems .
VSEs can achieve recognition through implementing a profile and by being audited against ISO/IEC 29110
specifications.
The ISO/IEC 29110 series can be applied at any phase of system or software development and support within
a life cycle. The ISO/IEC 29110 series is intended to be used by VSEs that do not have experience or expertise
in adapting or tailoring ISO/IEC/IEEE 12207, ISO/IEC/IEEE 32675, or ISO/IEC/IEEE 15288 standards to
the needs of a specific project. VSEs that have expertise in adapting or tailoring ISO/IEC/IEEE 12207 or
ISO/IEC/IEEE 15288 are encouraged to use those standards instead of the ISO/IEC 29110 series.
The ISO/IEC 29110 series is intended to be used with any life cycle such as: waterfall, iterative, incremental,
evolutionary or agile.
Systems, in the context of the ISO/IEC 29110 series, are typically composed of hardware and software
components.
The ISO/IEC 29110 series, targeted by audiences, has been developed to improve system or software and/
or service quality, and process performance. Figure 1 describes the ISO/IEC 29110 series and positions the
parts within the framework of reference.

© ISO/IEC 2026 – All rights reserved
vi
Figure 1 — The ISO/IEC 29110 series
ISO/IEC 29110-1-1 introduces processes, life cycle and standardization concepts, the taxonomy (catalogue) of
ISO/IEC 29110 profiles and the ISO/IEC 29110 series. ISO/IEC 29110-1-1 also introduces the characteristics
and needs of a VSE, and clarifies the rationale for specific profiles, documents, standards and guidelines.
ISO/IEC 29110-1-2 defines the terms common to the ISO/IEC 29110 series. ISO/IEC 29110-1-1 and
ISO/IEC 29110-1-2 are targeted at VSEs and their customers, assessors, standards producers, tool vendors
and methodology vendors.
ISO/IEC 29110-2 introduces the concepts for systems and software engineering profiles for VSEs. It
establishes the logic behind the definition and application of profiles. For standardized profiles, it specifies
the elements common to all profiles (structure, requirements, conformity, and assessment). For domain-
specific profiles (not standardized and developed outside of the ISO process), it provides general guidance
adapted from the definition of standardized profiles. ISO/IEC 29110-2 is targeted at profile producers, tool
vendors and methodology vendors.
ISO/IEC 29110-3 defines certification schemes, assessment guidelines and compliance requirements for
process capability assessment, conformity assessments, and self-assessments for process improvements.
ISO/IEC 29110-3 also contains information that can be useful to developers of certification and assessment
methods and developers of certification and assessment tools. ISO/IEC 29110-3 is addressed to people who
have direct involvement with the assessment process, e.g. the auditor, certification and accreditation bodies
and the sponsor of the audit, who need guidance on ensuring that the requirements for performing an audit
have been met. ISO/IEC 29110-3 is targeted at VSEs and their customers, assessors and accreditation bodies.
ISO/IEC 29110-4 provides the specifications for all generic profiles of the Generic profile group that are
based on subsets of appropriate standards elements. ISO/IEC 29110-4 is targeted at VSEs, customers,
standards producers, tool vendors and methodology vendors.

© ISO/IEC 2026 – All rights reserved
vii
ISO/IEC 29110-5 provides management, engineering and service delivery guidelines for profiles of the
Generic profile group. ISO/IEC 29110-5 is targeted at VSEs and their customers.
ISO/IEC 29110-6 provides the specifications for specific profiles based on subsets of appropriate standards
elements. ISO/IEC 29110-6 is targeted at VSEs, customers, standards producers, tool vendors and
methodology vendors.
ISO/IEC 29110-7 provides guidelines for each profile of the specific profile group. ISO/IEC 29110-7 is targeted
at VSEs and their customers.
If a new profile is needed, ISO/IEC 29110-4 or ISO/IEC 29110-6, ISO/IEC 29110-6, and/or ISO/IEC 29110-7,
ISO/IEC 29110-5 can be developed with minimal impact to existing documents.
0.2  Introduction to this document
This document aims to help VSEs that want to reinforce their agile/DevOps environment to develop and
support software products, or to add a DevOps approach to their agile approach with practices of the
ISO/IEC 29110 series.
A combined agile and DevOps approach focuses on speed and quality of software development combined
with continuous delivery of software into a production or production-like environment, optimizing the
software development, deployment and support process. It emphasizes a self-organizing, collaborative
culture that leverages automated processes and challenges non-value-added work. This can be perceived
to be in opposition to the requirements to follow processes and documentation requirements specified in
standards. However, this document provides a clear framework for a robust implementation of agile and
DevOps practices which can facilitate the use of the ISO/IEC 29110 Basic profile.
DevOps and agile are separate approaches and do not have to be implemented together. However, they are
complementary, and agile serves as an effective enabler for DevOps with its focus on small teams and high-
quality code. The most likely VSE implementation of DevOps is in combination with an agile approach, which
is the focus of this document.
Whilst DevOps focusses primarily on speed and quality, DevSecOps additionally focusses on integration
of security as a shared responsibility throughout the IT life cycle. This document can also be used for
DevSecOps guidance by highlighting the security focus when the DevOps approach is agreed.
This document provides examples of work product templates (see Annex A).
This document is based mainly on the scrum and XP agile methods (see Annex B) and on DevOps concepts
(see Annex C).
This document also aims to help VSEs that want to follow the two processes of the software Basic profile
of ISO/IEC 29110, as specified in ISO/IEC 29110-4-1, while performing their agile/DevOps practices (see
Annex B and C).
This document has been developed, using the management and engineering guidelines of the
ISO/IEC 29110-5-1-2 software Basic profile, by modifying and adding elements (e.g. task, work product, role)
for VSEs involved in the development and support of software using an agile and DevOps combined approach
(see Annex B and C). However, this document does not contain any requirements.
Using this document, VSEs can obtain the following benefits:
— project planning: by providing a set of events to enable the team to track the work and know what an
impediment can be and assign tasks to each member of the team;
— effort estimation: by providing estimation techniques for the sprint planning event;
— progress tracking: by providing tools (e.g. burndown chart, product backlog, daily scrum) to update and
track the work, the budget and the schedule until the project's closure;
— management of changes and artefacts: by providing a set of tasks to control the changes to the software
and management work products;
© ISO/IEC 2026 – All rights reserved
viii
— clarity of each role: by providing a set of tasks for each role;
— agile risk management: by providing work products to identify and manage risks;
— reduced rework: by providing a set of tasks that minimize errors and handle the detection and correction
of defects effectively;
— closer alignment between development and operations: by including operations support needs in project
implementation to deliver an optimized end-to-end process;
— increased responsiveness to resolving customer issues which require development work: by integrating
support incident responses into project work, rather than separating them into a separate work stream.

© ISO/IEC 2026 – All rights reserved
ix
International Standard ISO/IEC 29110-5-5:2026(en)
Systems and software engineering — Life cycle profiles for
very small entities (VSEs) —
Part 5-5:
Agile/DevOps guidelines
1 Scope
This document provides guidelines for very small entities (VSEs) who want to reinforce their agile/DevOps
environment to develop and support software using an agile approach with practices of the ISO/IEC 29110
series.
This document is applicable to VSEs that do not develop safety-critical products.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
ISO/IEC 29110-1-2, Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part
1-2: Vocabulary
3  Terms, definitions and abbreviated terms
3.1  Terms and definitions
For the purposes of this document, the terms and definitions given in ISO/IEC 29110-1-2 and the following
apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
3.1.1
acceptance criteria
working agreement (3.1.6) on the required quality attribute that work meets before it completes a specified
story or feature (3.1.20), item or artefact
[SOURCE: ISO/IEC 29110-5-4, 3.1.1]
3.1.2
agile
approach to development, delivery and maintenance of products and services by enabling rapid response to
feedback
Note 1 to entry: The required specification for the software under development is elaborated with specific
requirements only when the work is started. This lean principle is meant to avoid waste of work and to provide an
agile team (3.1.5) with means of prioritizing their work.

© ISO/IEC 2026 – All rights reserved
[SOURCE: ISO/IEC 33202:2024, 3.2, modified — In note 1 to entry, "need specification" has been replaced by
"required specification".]
3.1.3
agile development
development approach based on iterative development, frequent inspection and adaptation, and incremental
deliveries in which requirements and solutions evolve through collaboration in cross-functional teams and
through continuous stakeholder feedback
[SOURCE: ISO/IEC/IEEE 26515:2018, 3.1, modified — Note 1 to entry has been removed.]
3.1.4
agile environment
organizational culture, infrastructure (3.1.23), and methodologies that support agile development (3.1.3)
[SOURCE: ISO/IEC/IEEE 26515:2018, 3.2]
3.1.5
agile team
organization or team using agile development (3.1.3) methods and approaches
Note 1 to entry: Typically, with roles such as team lead, project manager, user or user representative, software and
information developers, and testers.
[SOURCE: ISO/IEC/IEEE 26515:2018, 3.3]
3.1.6
agreement
mutual acknowledgement of terms and conditions under which a working relationship is conducted
EXAMPLE Contract, memorandum of agreement.
[SOURCE: ISO/IEC/IEEE 12207:2017, 3.1.5]
3.1.7
backlog
collection of agile (3.1.2)features (3.1.20) or stories of both functional and operational requirements (3.1.26)
that are typically sorted in an order based on value priority
[SOURCE: ISO/IEC/IEEE 26515:2018, 3.4, modified — "nonfunctional requirements" has been replaced by
"operational requirements".]
3.1.8
baseline
formally approved version of a configuration item, regardless of media, formally designated and fixed at a
specific time during the configuration item’s life cycle
[SOURCE: ISO/IEC/IEEE 12207:2017, 3.1.11]
3.1.9
Basic profile
profile targeted at VSEs developing a single product by a single work team
[SOURCE: ISO/IEC 29110-1-2:2024, 4.14]
3.1.10
build
operational version of a system or component that incorporates a specified subset of the capabilities that the
final product will provide
[SOURCE: IEEE 828-2012, 2.1, IEEE dictionary]

© ISO/IEC 2026 – All rights reserved
3.1.11
burndown chart
graph that represents the work remaining to do on a project
[SOURCE: ISO/IEC/IEEE 26511:2018, 3.1.6]
3.1.12
burnup chart
graphical representation of the work completed toward the release of a product
[SOURCE: Agile Practice Guide, Project Management Institute, 2017]
3.1.13
continuous integration
technique that continually merges artefacts, including source code updates from all developers on a team,
into a shared mainline to build and test the developed system
[SOURCE: ISO/IEC/IEEE 32675:2022, 3.1]
3.1.14
daily scrum
brief daily meeting in agile development (3.1.3) methods where team members share accomplishments from
the prior daily meeting, plans for the current day and identification of impediments
[SOURCE: ISO/IEC 29110-5-4, 3.1.29]
3.1.15
definition of done
DoD
statement on the required quality attributes that work meets before the work completes a specified life
cycle activity or task and is ready for use
Note 1 to entry: ‘Done’ in a DevOps (3.1.16) environment includes deployment into a production environment or a
production-like environment.
[SOURCE: ISO/IEC/IEEE 33202:2024, 3.13, modified — Note 1 to entry has been removed.]
3.1.16
DevOps
set of principles and practices which enable better communication and collaboration between relevant
stakeholders for the purpose of specifying, developing, and operating software and systems products and
services, and continuous improvements in all aspects of the life cycle
Note 1 to entry: DevOps uses lean principles to increase speed and quality of software delivery and may be regarded
as the logical continuation of the agile (3.1.2) software journey.
[SOURCE: ISO/IEC/IEEE 32675:2022, 3.1, modified — Note 1 to entry has been added.]
3.1.17
DevOps specialist
DS
DevOps engineer
individual with a wide-ranging knowledge of both development and operations including coding,
infrastructure (3.1.23) management, system administration and DevOps (3.1.16) tools
3.1.18
DevSecOps
DevOps (3.1.16) extended to include security capabilities as an essential and integral part of the development
and operations processes
Note 1 to entry: Whilst DevOps is focused on increasing speed and quality of software development and delivery, the
primary focus of DevSecOps is on securing the software development process by integrating security from the very
beginning of the life cycle and throughout the software development, testing and support life cycle.

© ISO/IEC 2026 – All rights reserved
[SOURCE: ISO/IEC TS 23167:2020, 3.11, modified — Note 1 to entry has been added.]
3.1.19
event
ceremony
key meeting in which a set of tasks are performed to help the scrum lead (3.1.38), product owner (3.1.32), and
developer to organize, evaluate, and adjust the work to be done to develop a product
EXAMPLE Sprint (3.1.41) planning, daily scrum (3.1.14), sprint review and sprint retrospective.
[SOURCE: ISO/IEC 29110-5-4, 3.1.14]
3.1.20
feature
functional or operational distinguishing characteristic of a system
[SOURCE: ISO/IEC/IEEE 26515:2018, 3.7, modified — "nonfunctional" has been replaced by "operational";
the original note 1 to entry has been removed.]
3.1.21
incident
anomalous or unexpected event, set of events, condition, or situation at any time during the life cycle of a
project, product, service, or system
[SOURCE: ISO/IEC 12207:2017, 3.1.23]
3.1.22
increment
tested, deliverable version of a software product (3.1.39) that provides new or modified capabilities
[SOURCE: ISO/IEC 33202:2024, 3.17]
3.1.23
infrastructure
facilities such as power and physical security of the data centre, networking, hardware, and software needed
to support the systems life cycle and maintain IT services
Note 1 to entry: Infrastructure does not include the associated people, processes, or documentation. In DevOps
(3.1.15), software defined infrastructure enables elasticity.
[SOURCE: ISO/IEC/IEEE 32675:2021, 3.1]
3.1.24
left-shift
prioritizing the involvement of relevant stakeholders in applying quality activities, security, privacy,
performance, verification, and validation earlier in the life cycle
[SOURCE: ISO/IEC/IEEE 32675:2021, 3.1]
3.1.25
measure
measure, noun
variable to which a value is assigned as the result of measurement
Note 1 to entry: The plural form “measures” is used to refer collectively to base measures, derived measures and
indicators.
[SOURCE: ISO/IEC/IEEE 15939:2017, 3.15]

© ISO/IEC 2026 – All rights reserved
3.1.26
operational requirement
non-functional requirement
requirement which defines how well a product or the environment in which it is developed and deployed
performs
Note 1 to entry: Operational requirements include aspects such as performance, security, scalability, maintainability,
automation. They complement functional requirements which are expressed in agile (3.1.2) methodologies as user
stories (3.1.48).
3.1.27
pair programming
practice from eXtreme Programming (XP) that typically involves one developer writing source code
or configuring a system while a second developer observes the work to look for errors and to determine
whether the work completed is accurate and meets its requirements
Note 1 to entry: Pairs alternate roles periodically so a different developer writes code while the other developer
observes.
[SOURCE: ISO/IEC 29110-5-4, 3.1.17]
3.1.28
planning poker
team-based estimation approach whereby relative estimates of the effort required to develop and test each
user story (3.1.48) and operational requirement (3.1.27) are set via consensus
Note 1 to entry: The approach uses poker cards that are typically based on a Fibonacci sequence (i.e. 1, 2, 3, 5, 8, 13).
3.1.29
process purpose
high-level objective of performing the process and the likely outcomes of effective implementation of the
process
[SOURCE: ISO/IEC/IEEE 24774:2021, 3.12]
3.1.30
process outcome
observable result of the successful achievement of the process purpose (3.1.29)
[SOURCE: ISO/IEC/IEEE 24774:2021, 3.11]
3.1.31
product backlog
emergent, ordered list of what is needed to improve the product
Note 1 to entry: It is the single source of work undertaken by the agile team (3.1.5).
[SOURCE: ISO/IEC 29110-5-4, 3.1.19]
3.1.32
product owner
designated stakeholder accountable for defining and accepting outcomes of the work and managing backlog
(3.1.7), while aligning with the stakeholder needs
Note 1 to entry: A product owner is also the 'voice of the user' or the user representative on the team.
[SOURCE: ISO/IEC 33202:2024, 3.2, modified — Note 1 to entry has been added.]

© ISO/IEC 2026 – All rights reserved
3.1.33
profile
subset of appropriate standards’ processes and their outcomes, activities and tasks combined to accomplish
a particular function
Note 1 to entry: The base standards used to develop profiles for VSEs are ISO/IEC/IEEE 12207, ISO/IEC/IEEE 15288
and ISO/IEC/IEEE 15289. With the addition of DevOps to the scope of the 29110 series, ISO/IEC/IEEE 32675 is
introduced as a base standard for this document.
[SOURCE: ISO/IEC 29110-1-2, 3.70]
3.1.34
repository
organized and persistent data storage that allows data retrieval
[SOURCE: ISO/IEC/IEEE 26511:2018, 3.1.24]
3.1.35
safety-critical product
software whose failure or malfunction can result in one (or more) of the following outcomes:
— death or serious injury to people
— loss or severe damage to equipment or property
— environmental harm
[SOURCE: ISO/IEC 23643:2020, 3.15, modified — EXAMPLE has been removed.]
3.1.36
self-organizing team
group composed of motivated individuals working together toward meeting a goal
Note 1 to entry: They have the ability and authority for decision-making. They manage their work and readily adapt to
changing demands.
Note 2 to entry: Principles of self-organizing teams are competency, collaboration, motivation, trust, respect and
continuity.
3.1.37
scrum
iterative project management framework used in agile development (3.1.3), in which a team agrees on
development items from product backlog (3.1.31) and produces them within a short duration of a few weeks
[SOURCE: ISO/IEC 29110-1-2:2024, 3.81]
3.1.38
scrum lead
person who facilitates the scrum (3.1.37) process within a team or project
[SOURCE: ISO/IEC/IEEE 24765:2017, 3.3638, modified — The term has been changed from "scrum master"
to "scrum lead".]
3.1.39
service level agreement
SLA
documented agreement between a service provider and a customer that identifies services and service
targets
[SOURCE: ISO/IEC 20110-1-2, 3.90]

© ISO/IEC 2026 – All rights reserved
3.1.40
software product
set of computer programs, procedures, and possibly associated documentation and data
[SOURCE: ISO/IEC/IEEE 12207:2017, 3.1.54, modified — Note 1 to entry has been removed.]
3.1.41
sprint
short time frame, in which a set of software features (3.1.20) is developed, leading to a working product that
can be demonstrated to stakeholders
Note 1 to entry: In some organizations, a sprint is known as an iteration.
[SOURCE: ISO/IEC/IEEE 24765:2017, 3.3914]
3.1.42
sprint backlog
iteration backlog
sprint catalogue
set of backlog (3.1.7) items [e.g. user stories (3.1.48)] that are selected for inclusion in a given sprint (3.1.40)
[SOURCE: ISO/IEC 29110-5-4: 2025, 3.1.32]
3.1.43
story points
units of measure for expressing an estimate of the overall effort required to fully implement a product
backlog (3.1.31) item or any other piece of work
[SOURCE: ISO/IEC 29110-5-4: 2025, 3.1.33]
3.1.44
time-boxed
having a prescribed duration limit for a project task
[SOURCE: ISO/IEC 29110-5-4: 2025, 3.1.34]
3.1.45
task board
kanban board
scrum board
visual representation of an agile team's (3.1.5) progress within an iteration
[SOURCE: ISO/IEC 29110-5-4: 2025, 3.1.35]
3.1.46
technical debt
deferred cost of work not done at an earlier point in the product life cycle
[SOURCE: Software Extension to the PMBOK Guide Fifth Edition]
3.1.47
unit test
testing of individual routines and modules by the developer or an independent tester
[SOURCE: ISO/IEC/IEEE 24765:2017, 3.4429, definition 1]
3.1.48
user story
brief description of desired functionality
Note 1 to entry: A user story can describe the stakeholder roles, goals, benefits, and motivation.

© ISO/IEC 2026 – All rights reserved
Note 2 to entry: Work items in the backlog (3.1.7) can also be referred in other ways like epics, features (3.1.20), items
or artefacts.
[SOURCE: ISO/IEC 33202:2024, 3.27, modified — In Note 2 to entry, "work" has been replaced by "work
items"; "items or artefacts" has been added.]
3.1.49
velocity
rate of current work unit completion, measured as work units completed per fixed time period, such as
story points (3.1.43), delivered features (3.1.20), functions, function points, user stories (3.1.48), use cases, or
requirements completed in a given time period
Note 1 to entry: Used as a measure of burndown rate or burnup rate.
[SOURCE: ISO/IEC/IEEE 32675:2022, 3.1]
3.2  Abbreviated terms
AN analyst
DES designer
DOT DevOps team
CUS customer
PM project management
PR programmer
PJM project manager
PO product owner
SIS software implementation and support
SL scrum lead
TE task event
TL technical lead
VSE very small entity
WP work product
4  Naming, diagramming and definition conventions
This clause provides a description of the process structure and the notation used to describe the processes.
Process name – process identifier, followed by its abbreviation in parentheses “( )”.
Process purpose – high level objective of performing the process and the likely outcomes of effective
implementation of the process.
Process outcomes – observable result of the successful achievement of the process purpose. Outcomes are
identified by the abbreviation of the process name, followed by the letter “O” and a consecutive number, for
example PM.O1, SIS.O2.
Events – key meetings throughout the software development to organize, evaluate, and adjust the work to be
done to develop a product in an agile environment. For the purpose of this document, an event is composed
of a set of tasks to be performed. An event is the first level of process workflow decomposition, and the

© ISO/IEC 2026
...