ISO 13623:2017/Amd 1:2024

Petroleum and natural gas industries — Pipeline transportation systems — Amendment 1: Complementary requirements for the transportation of fluids containing carbon dioxide or hydrogen

Industries du pétrole et du gaz naturel — Systèmes de transport par conduites — Amendement 1: Exigences complémentaires relatives au transport de fluides contenant du dioxyde de carbone ou de l'hydrogène

General Information

• Status: Published
• Publication Date: 02-Jun-2024
• ICS: 75.200 - Petroleum products and natural gas handling equipment
• Technical Committee: ISO/TC 67/SC 2 - Pipeline transportation systems
• Drafting Committee: ISO/TC 67/SC 2 - Pipeline transportation systems
• Current Stage: 6060 - International Standard published
• Start Date: 03-Jun-2024
• Due Date: 14-May-2024
• Completion Date: 03-Jun-2024

Relations

• Amends: ISO 13623:2017 - Petroleum and natural gas industries — Pipeline transportation systems
• Effective Date: 06-Jun-2022

Standards Content (Sample)

International
Standard
ISO 13623
Third edition
Petroleum and natural
2017-09
gas industries — Pipeline
transportation systems
AMENDMENT 1
2024-06
AMENDMENT 1: Complementary
requirements for the transportation
of fluids containing carbon dioxide or
hydrogen
Industries du pétrole et du gaz naturel — Systèmes de transport
par conduites
AMENDEMENT 1: Exigences complémentaires relatives au
transport de fluides contenant du dioxyde de carbone ou de
l'hydrogène
Reference number
ISO 13623:2017/Amd.1:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
ISO 13623:2017/Amd.1:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland

© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO 13623:2017/Amd.1:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 67, Oil and gas industries including lower carbon
energy, Subcommittee SC 2, Pipeline transportation systems.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

© ISO 2024 – All rights reserved
iii

---------------------- Page: 3 ----------------------
ISO 13623:2017/Amd.1:2024(en)
Petroleum and natural gas industries — Pipeline
transportation systems
AMENDMENT 1: Complementary requirements for the
transportation of fluids containing carbon dioxide or hydrogen

2 Normative references
Add the following documents:
ISO 27913, Carbon dioxide capture, transportation and geological storage — Pipeline transportation systems
API Spec 5L, 46th edition (2018), Specification for Line Pipe

5.2 Categorization of fluids
Add the following paragraph at the end of the subclause:
For category E fluids containing carbon dioxide exceeding the limit specified in G.1 the requirements in
Annex G shall apply
For category E fluids containing hydrogen exceeding the limit specified in H.2, Annex H shall apply.

8.1.6 Shear-fracture toughness
Designate the existing NOTE as NOTE 1 and add the following new NOTE:
NOTE 2 ISO 27913 provides guidance on determining the fracture-toughness requirements for the arrest
of running shear fractures in carbon dioxide pipelines.

Annex G
Add the following annex af
...

Norme
internationale
ISO 13623
Troisième édition
Industries du pétrole et du gaz
2017-09
naturel — Systèmes de transport
par conduites
AMENDEMENT 1
2024-06
AMENDEMENT 1: Exigences
complémentaires relatives au
transport de fluides contenant du
dioxyde de carbone ou de l'hydrogène
Petroleum and natural gas industries — Pipeline
transportation systems
AMENDMENT 1: Complementary requirements for the
transportation of fluids containing carbon dioxide or hydrogen
Numéro de référence
ISO 13623:2017/Amd.1:2024(fr) © ISO 2024

---------------------- Page: 1 ----------------------
ISO 13623:2017/Amd.1:2024(fr)
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2024
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: [phone]
E-mail: [e-mail]
Web: www.iso.org
Publié en Suisse

© ISO 2024 – Tous droits réservés
ii

---------------------- Page: 2 ----------------------
ISO 13623:2017/Amd.1:2024(fr)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux
de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général
confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire
partie du comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (IEC) en ce qui concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d'approbation requis pour les différents types de documents ISO. Le présent document
a été rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2
(voir www.iso.org/directives).
L'ISO attire l'attention sur le fait que la mise en application du présent document peut entraîner l'utilisation
d'un ou de plusieurs brevets. L'ISO ne prend pas position quant à la preuve, à la validité et à l'applicabilité de
tout droit de propriété revendiqué à cet égard. À la date de publication du présent document, l'ISO n'avait pas
reçu notification qu'un ou plusieurs brevets pouvaient être nécessaires à sa mise en application. Toutefois,
il y a lieu d'avertir les responsables de la mise en application du présent document que des informations
plus récentes sont susceptibles de figurer dans la base de données de brevets, disponible à l'adresse
www.iso.org/brevets. L'ISO ne saurait être tenue pour responsable de ne pas avoir identifié de tels droits de
propriété et averti de leur existence.
Les appellations commerciales éventuellement mentionnées dans le présent document sont données pour
information, par souci de commodité, à l'intention des utilisateurs et ne sauraient constituer un engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l'ISO liés à l'évaluation de la conformité, ou pour toute information au sujet de l'adhésion de
l'ISO aux principes de l'Organisation mondiale du commerce (OMC) concernant les obstacles techniques au
commerce (OTC), voir le lien suivant: www.iso.org/iso/fr/avant-propos.
Le présent document a été élaboré par le comité technique ISO/TC 67, Industries du pétrole et du gaz, y
compris les énergies à faible teneur en carbone, sous-comité SC 2, Systèmes de transport par conduites.
Il convient que l'utilisateur adresse tout retour d'information ou toute question concernant le présent
document à l'organisme national de normalisation de son pays. Une liste exhaustive desdits organismes se
trouve à l'adresse www.iso.org/fr/members.html.

© ISO 2024 – Tous droits réservés
iii

---------------------- Page: 3 ----------------------
ISO 13623:2017/Amd.1:2024(fr)
Industries du pétrole et du gaz naturel — Systèmes de
transport par conduites
AMENDEMENT 1: Exigences complémentaires relatives au
transport de fluides contenant du dioxyde de carbone ou de
l'hydrogène

2  Références normatives
Ajouter les documents suivants:
ISO 27913, Captage du dioxyde de carbone, transport et stockage géologique — Systèmes de transport par
conduites
API Spec 5L, 46th edition (2018), Specification for Line Pipe

5.2  Catégorisati
...

FINAL DRAFT
Amendment
ISO 13623:2017/
FDAM 1
ISO/TC 67/SC 2
Petroleum and natural
Secretariat: UNI
gas industries — Pipeline
Voting begins on:
transportation systems
2024-03-06
AMENDMENT 1: Complementary
Voting terminates on:
2024-05-01
requirements for the transportation
of fluids containing carbon dioxide or
hydrogen
Industries du pétrole et du gaz naturel — Systèmes de transport
par conduites
AMENDEMENT 1: Exigences complémentaires relatives au
transport de fluides contenant du dioxyde de carbone ou de
l'hydrogène
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO 13623:2017/FDAM 1:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
FINAL DRAFT
ISO 13623:2017/FDAM 1:2024(en)
Amendment
ISO 13623:2017/
FDAM 1
ISO/TC 67/SC 2
Petroleum and natural
Secretariat: UNI
gas industries — Pipeline
Voting begins on:
transportation systems
AMENDMENT 1: Complementary
Voting terminates on:
requirements for the transportation
of fluids containing carbon dioxide or
hydrogen
Industries du pétrole et du gaz naturel — Systèmes de transport
par conduites
AMENDEMENT 1: Exigences complémentaires relatives au
transport de fluides contenant du dioxyde de carbone ou de
l'hydrogène
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
COPYRIGHT PROTECTED DOCUMENT
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO 2024
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland Reference number
ISO 13623:2017/FDAM 1:2024(en) © ISO 2024

© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO 13623:2017/FDAM 1:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
...

2024-01-15
ISO 13623:2017/DAMFDAmd 1:2023(E)
ISO/TC 67/SC 2/WG 13
Secretariat: UNI
Date: 2024-02-20
Petroleum and natural gas industries — Pipeline transportation
systems
—
AMENDMENT 1: Complementary requirements for the transportation of
fluids containing carbon dioxide or hydrogen
Industries du pétrole et du gaz naturel — Systèmes de transport par conduites
AMENDEMENT 1: Exigences complémentaires relatives au transport de fluides contenant du dioxyde de
carbone ou de l'hydrogène
FDIS stage

---------------------- Page: 1 ----------------------
ISO 13623:2017/DAMFDAmd 1:2023(E(en)
© ISO 20232017
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO
at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Fax: [phone]
EmailE-mail: [e-mail]
Website: www.iso.org
Published in Switzerland
© ISO 2023 – All rights reserved
ii
© ISO 2024 – All rights reserved

ii

---------------------- Page: 2 ----------------------
ISO 13623:2017/DAMFDAmd 1:2023(E(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of
ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights
in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s)
which may be required to implement this document. However, implementers are cautioned that this may not
represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 67, Oil and gas industries including lower carbon
energy, Subcommittee SC 2, Pipeline transportation systems.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
© ISO 2024 – All rights reserved

iii
© ISO 2023 – All rights reserved
iii

---------------------- Page: 3 ----------------------
ISO 13623:2017/FDAmd 1(en)
Petroleum and natural gas industries — Pipeline transportation
systems
—
AMENDMENT 1: Complementary requirements for the transportation
of fluids containing carbon dioxide or hydrogen

2 Normative references
Add the following documents:
ISO 27913, Carbon dioxide capture, transportation and geological storage — Pipeline transportation
systems
API Spec 5L, 46th edition (2018), Specification for Line Pipe

5.2 Categorization of fluids
Add the following paragraph at the end of the subclause:
For category E fluids containing carbon dioxide exceeding the limit specified in G.1 the requirements in
Annex G shall apply
For category E fluids containing hydrogen exceeding the limit specified in H.2, Annex H shall apply.

8.1.6 Shear-fracture toughness
Designate the existing NOTE as NOTE 1 and add the following new NOTE:
NOTE 2   ISO 27913 provides guidance on determining the fracture-toughness re
...