ISO 19014-3:2018

Earth-moving machinery — Functional safety — Part 3: Environmental performance and test requirements of electronic and electrical components used in safety-related parts of the control system

This document specifies the minimum requirements for environmental testing of electronic and electrical components identified as safety-related parts of the control system (SRP/CS) used on earth-moving machinery (EMM) as defined in ISO 6165 and their attachments.

Engins de terrassement — Sécurité fonctionnelle — Partie 3: Exigences pour la performance environnementale et l'essai des composants électroniques et électriques utilisés dans les parties relatives à la sécurité du système de commande

Le présent document spécifie les exigences minimales pour les essais d'environnement des composants électroniques et électriques identifiés comme des parties relatives à la sécurité du système de commande (SRP/CS) utilisés sur les engins de terrassement, comme défini dans l'ISO 6165 et leurs accessoires.

General Information

• Status: Published
• Publication Date: 10-Sep-2018
• ICS: 53.100 - Earth-moving machinery
• Technical Committee: ISO/TC 127/SC 2 - Safety, ergonomics and general requirements
• Drafting Committee: ISO/TC 127/SC 2 - Safety, ergonomics and general requirements
• Current Stage: 9092 - International Standard to be revised
• Completion Date: 06-Dec-2023

Relations

• Consolidates: ISO/ASTM 51401:2013 - Practice for use of a dichromate dosimetry system
• Effective Date: 06-Jun-2022
• Revised: ISO/TS 15998-2:2012 - Earth-moving machinery — Machine control systems (MCS) using electronic components — Part 2: Use and application of ISO 15998
• Effective Date: 26-May-2018
• Revises: ISO 15998:2008 - Earth-moving machinery — Machine-control systems (MCS) using electronic components — Performance criteria and tests for functional safety
• Effective Date: 26-May-2018

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 19014-3
First edition
2018-09
Earth-moving machinery —
Functional safety —
Part 3:
Environmental performance and
test requirements of electronic and
electrical components used in safety-
related parts of the control system
Engins de terrassement — Sécurité fonctionnelle —
Partie 3: Exigences pour la performance environnementale et l'essai
des composants électroniques et électriques utilisés dans les parties
relatives à la sécurité du système de commande
Reference number
ISO 19014-3:2018(E)
©
ISO 2018

---------------------- Page: 1 ----------------------
ISO 19014-3:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 19014-3:2018(E)

Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Functional status classifications . 2
4.1 Class A . 2
4.2 Class B . 2
4.3 Class C . 2
4.4 Class D . 2
5 Tests and requirements . 2
5.1 General . 2
5.2 Dust . 3
5.2.1 Purpose . 3
5.2.2 Test method . 3
5.3 Chemical resistance . 3
5.3.1 Purpose .
...

ISO/TC 127
Deleted: 06
Date: 2018‐09
ISO 19014-3:2018(E) Deleted: /FDIS
ISO/TC 127/SC 2
Earth-moving machinery — Functional Safety — Part 3: Environmental
performance and test requirements of electronic and electrical components used
in safety-related parts of the control system
Deleted: Section Break (Next Page)
Copyright notice¶
This ISO document is a Draft
International Standard and is
copyright‐protected by ISO.
Except as permitted under the
applicable laws of the user's
country, neither this ISO draft nor
any extract from it may be
reproduced, stored in a retrieval
system or transmitted in any
form or by any means, electronic,
photocopying, recording or
otherwise, without prior written
permission being secured.¶
Requests for permission to
reproduce should be addressed
to either ISO at the address below
or ISO's member body in the
country of the requester.¶
ISO copyright office¶
Case postale 56 • CH‐1211 Geneva
20¶
Tel. + 41 22 749 01 11¶
Fax + 41 22 749 09 47¶
E‐mail [e-mail]¶
Web www.iso.org¶
Reproduction may be subject to
royalty payments or a licensing
agreement.¶
Violators may be prosecuted.¶

---------------------- Page: 1 ----------------------
ISO 19014-3:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national
standards bodies (ISO member bodies). The work of preparing International Standards is normally
carried out through ISO technical committees. Each member body interested in a subject for which
a technical committee has been established has the right to be represented on that committee.
International organizations, governmental and non‐governmental, in liaison with ISO, also take
part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC)
on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for
the different types of ISO documents should be noted. This document was drafted in accordance
with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
Details of any patent rights identified during the development of the document will be in the
Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does
not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 127, Earth-moving machinery,
Subcommittee SC 2, Safety, ergonomics and general requirements.
This first edition of ISO 19014‐3, together with ISO 19014‐1, ISO 19014‐2, ISO 19014‐4 and
ISO/TS 19014‐5, cancels and replaces ISO 15998, which has been technically revised.
The main changes compared to the previous document are as follows:
— details added to existing test requirements;
— additional electrical and environmental tests.
A list of all parts in the ISO 19014‐series can be found on the ISO website. At the time of publication
of this document, Part 2, Design and evaluation of safety-related machine control systems, Part 4,
Design and evaluation of software and transmission for safety related parts of the control system, and
Part 5, Tables of performance levels, are under development.
Any feedback or questions on this document should be directed to the user’s national standards
body. A complete listing of these bodies can be found at www.iso.org/members.html.
2 ©ISO 2018– All rights reserved

---------------------- Page: 2 ----------------------
ISO 19014-3:2018(E)
Deleted: /FDIS
Introduction
This document addresses electronic and electrical systems used for functional safety in earth‐
moving machinery.
The structure of safety standards in the field of machinery is as follows.
Type‐A standards (basis standards) give basic concepts, principles for design and general aspects
that can be applied to machinery.
Type‐B standards (generic safety standards) deal with one or more safety aspects, or one or more
types of safeguards that can be used across a wide range of machinery:
— type‐B1 standards on particular safety aspects (e.g. safety distances, surface temperature,
noise);
— type‐B2 standards on safeguards (e.g. two‐hands controls, interlocking devices, pressure
sensitive dev
...

NORME ISO
INTERNATIONALE 19014-3
Première édition
2018-09
Engins de terrassement — Sécurité
fonctionnelle —
Partie 3:
Exigences pour la performance
environnementale et l'essai des
composants électroniques et
électriques utilisés dans les parties
relatives à la sécurité du système de
commande
Earth-moving machinery — Functional safety —
Part 3: Environmental performance and test requirements of
electronic and electrical components used in safety-related parts of
the control system
Numéro de référence
ISO 19014-3:2018(F)
©
ISO 2018

---------------------- Page: 1 ----------------------
ISO 19014-3:2018(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2018
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: [phone]
Fax: [phone]
E-mail: [e-mail]
Web: www.iso.org
Publié en Suisse
ii © ISO 2018 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 19014-3:2018(F)

Sommaire Page
Avant-propos .v
Introduction .vi
1 Domaine d'application . 1
2 Références normatives . 1
3 Termes et définitions . 2
4 Classifications des critères d’aptitude à la fonction . 2
4.1 Classe A . 2
4.2 Classe B . 2
4.3 Classe C . 2
4.4 Classe D. 2
5 Essais et exigences . 2
5.1 Généralités . 2
5.2 Poussière . 3
5.2.1 Objet. 3
5.2.2 Méthode d'essai . 3
5.3 Résistance chimique . 3
5.3.1 Objet.
...