ISO 14649-1:2003

Industrial automation systems and integration — Physical device control — Data model for computerized numerical controllers — Part 1: Overview and fundamental principles

ISO 14649-1:2003 provides an introduction and overview of a data model for Computerized Numerical Controllers and explains its advantages and basic principle, based on the concepts of Product Data.

Systèmes d'automatisation industrielle et intégration — Commande des dispositifs physiques — Modèle de données pour les contrôleurs numériques informatisés — Partie 1: Aperçu et principes fondamentaux

General Information

• Status: Published
• Publication Date: 02-Mar-2003
• ICS: 25.040.20 - Numerically controlled machines
• Technical Committee: ISO/TC 184/SC 1 - Industrial cyber and physical device control
• Drafting Committee: ISO/TC 184/SC 1 - Industrial cyber and physical device control
• Current Stage: 9060 - Close of review
• Start Date: 04-Jun-2029

Relations

• Revises: ISO 6983-1:1982 - Numerical control of machines — Program format and definition of address words — Part 1: Data format for positioning, line motion and contouring control systems
• Effective Date: 15-Apr-2008

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 14649-1
First edition
2003-03-01


Industrial automation systems and
integration — Physical device control —
Data model for computerized numerical
controllers —
Part 1:
Overview and fundamental principles
Systèmes d'automatisation industrielle et intégration — Commande des
dispositifs physiques — Modèle de données pour les contrôleurs
numériques informatisés —
Partie 1: Aperçu et principes fondamentaux




Reference number
ISO 14649-1:2003(E)
©
ISO 2003

---------------------- Page: 1 ----------------------
ISO 14649-1:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO 2003 — All rights reserved

---------------------- Page: 2 ----------------------
ISO 14649-1:2003(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope. 1
2 Normative references . 1
3 Terms and definitions. 2
3.1 Terms defined in ISO 10303-1. 2
3.2 Terms defined in ISO 10303-11. 2
3.3 Terms defined in ISO 10303-21. 3
3.4 Terms defined in ISO 10303-224. 3
3.5 Terms defined in ISO 2806 . 3
3.6 New definitions in ISO 14649 . 3
4 Symbols and abbreviated terms. 4
5 Overview of ISO 14649. 4
5.1 Purpose. 4
5.2 The manufacturing cycle. 4
5.3 Program organization. 6
5.4 Project description. 6
5.5 Executables and the Workplan. 6
5.6 Workingstep and machining operation .
...