ISO 10303-224:2006
(Main)Industrial automation systems and integration — Product data representation and exchange — Part 224: Application protocol: Mechanical product definition for process planning using machining features
Industrial automation systems and integration — Product data representation and exchange — Part 224: Application protocol: Mechanical product definition for process planning using machining features
ISO 10303-224:2006 documents the application protocol for the representation and exchange of information for manufacturing single piece mechanical parts. ISO 10303-224:2006 includes explicit and implicit shape representation of machining features. It addresses manufacturing part properties, process control documentation, manufacturing specifications, administration data, and requisitions.
Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 224: Protocole d'application: Définition de produits mécaniques pour la planification de procédés utilisant des caractéristiques d'usinage
General Information
Relations
Buy Standard
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 10303-224
Third edition
2006-08-15
Industrial automation systems and
integration — Product data
representation and exchange —
Part 224:
Application protocol: Mechanical product
definition for process planning using
machining features
Systèmes d'automatisation industrielle et intégration — Représentation
et échange de données de produits —
Partie 224: Protocole d'application: Définition de produits mécaniques
pour la planification de procédés utilisant des caractéristiques d'usinage
Reference number
ISO 10303-224:2006(E)
©
ISO 2006
---------------------- Page: 1 ----------------------
ISO 10303-224:2006(E)
PDF disclaimer
PDF files may contain embedded typefaces. In accordance with Adobe's licensing policy, such files may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading a PDF file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create the PDF file(s) constituting this document can be found in the General Info relative to
the file(s); the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the files are suitable for
use by ISO member bodies. In the unlikely event that a problem relating to them is found, please inform the Central Secretariat at the
address given below.
This CD-ROM contains:
1) the publication ISO 10303-224:2006 in portable document format (PDF), which can be viewed using
Adobe® Acrobat® Reader;
2) the EXPRESS listings for ISO 10303-224:2006.
Adobe and Acrobat are trademarks of Adobe Systems Incorporated.
This third edition of ISO 10303-224 cancels and replaces the second edition (ISO 10303-224:2001), which
has been technically revised.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this CD-ROM may be reproduced, stored in a retrieval system or transmitted in
any form or
...
INTERNATIONAL ISO
STANDARD 10303-224
Third edition
2006-08-15
Industrial automation systems and
integration — Product data
representation and exchange —
Part 224:
Application protocol: Mechanical product
definition for process planning using
machining feature
Systèmes d'automatisation industrielle et intégration — Représentation
et échange de données de produits —
Partie 224: Protocole d'application: Définition de produits mécaniques
pour la planification de procédés utilisant des caractéristiques d'usinage
Reference number
ISO 10303-224:2006(E)
©
ISO 2006
---------------------- Page: 1 ----------------------
ISO 10303-224:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 10303-224:2006(E)
Contents
1 Scope.1
2 Normative references .2
3 Terms, definitions, and abbreviations.4
3.1 Terms defined in ISO 1101.4
3.2 Terms defined in ISO 5459.4
3.3 Terms defined in ISO 10303-1.4
3.4 Terms defined in ISO 10303-31.5
3.5 Terms defined in ISO 10303-42.5
3.6 Terms defined in ISO 10303-240.5
3.7 Other definitions.5
3.8 Abbreviations .6
4 Information requirements.6
4.1 Units of functionality .7
4.1.1 design_exception.8
4.1.2 feature_definition_item .8
4.1.3 feature_profile .10
4.1.4 library_reference .10
4.1.5 manufacturing_feature.11
4.1.6 manufacturing_part_properties .14
4.1.7 manufacturing_process_control_documentation.15
4.1.8 manufacturing_process_requirement_documents .16
4.1.9 measurement_limitations.16
4.1.10 part_administration_data.18
4.1.11 part_model.18
4.1.12 requisitions .19
4.1.13 shape_representation_for_machining.19
4.2 Application objects.20
4.3 Application assertions .202
5 Application interpreted model .247
5.1 Mapping specification.247
5.1.1 design_exception UoF.248
5.1.2 feature_definition_item UoF .252
5.1.3 feature_profile UoF .296
5.1.4 library_reference UoF .335
5.1.5 manufacturing_feature UoF .342
5.1.6 manufacturing_part_properties UoF .544
5.1.7 manufacturing_process_control_documentation UoF.554
5.1.8 manufacturing_process_requirement_documents UoF .562
5.1.9 measurement_limitations UoF .565
5.1.10 part_administration_data UoF.609
5.1.11 part model UoF.612
5.1.12 requisitions UoF .623
5.1.13 shape_representation_for_machining UoF.626
5.2 AIM EXPRESS short listing.642
6 Conformance requirements.706
©ISO 2006 — All rights reserved iii
---------------------- Page: 3 ----------------------
ISO 10303-224:2006(E)
Annex A (normative) AIM EXPRESS expanded listing .708
Annex B (normative) AIM short names .894
Annex C (normative) Implementation method specific requirements.907
Annex D (normative) Protocol Implementation Conformance Statement (PICS) proforma.908
Annex E (normative) Information object registration.909
Annex F (informative) Application activity model.910
Annex G (informative) Application reference model .935
Annex H (informative) AIM EXPRESS-G.966
Annex J (informative) Computer interpretable listings .997
Annex K (informative)Technical discussions.998
Bibliography .1005
Index .1006
Figures
Figure 1 — Data planning model.xii
Figure 2 — Angle_taper .21
Figure 3 — Angular_dimension_tolerance.22
Figure 4 — Angular_size_dimension_tolerance.23
Figure 5 — Angularity_tolerance for a plane surface.24
Figure 6 — Angularity_tolerance for an axis .25
Figure 7 — Bevel_gear.27
Figure 8 — Bevel_gear with shaft angle, and pitch angle .27
Figure 9 — Bevel_gear with root_angle and tip_angle .28
Figure 10 — Block_base_shape .29
Figure 11 — Catalogue_gear .32
Figure 12 — Catalogue_knurl .33
Figure 13 — Catalogue_marking.34
Figure 14 — Catalogue_thread.34
Figure 15 — Chamfer .35
Figure 16 — Circular_boss.37
Figure 17 — Circular_boss with taper.37
Figure 18 — Circular_closed_profile .38
Figure 19 — Circular_offset_pattern.40
Figure 20 — Circular_omit_pattern.41
Figure 21 — Circular_pattern with rotation .42
Figure 22 — Circular_pattern without rotation .42
Figure 23 — Circular_runout_tolerance.44
Figure 24 — Circularity_tolerance .45
Figure 25 — Complete_circular_path.46
Figure 26 — Compound_feature .47
Figure 27 — Concentricity_tolerance.49
Figure 28 — Conical_hole_bottom.50
Figure 29 — Constant_radius_edge_round .51
Figure 30 — Constant_radius_fillet.52
Figure 31 — Counterbore_hole .53
Figure 32 — Countersunk_hole.54
Figure 33 — Curved_dimension_tolerance .55
Figure 34 — Cutout .57
Figure 35 — Cylindrical_base_shape.58
Figure 36 — Cylindricity_tolerance .59
iv ©ISO 2006 — All rights reserved
---------------------- Page: 4 ----------------------
ISO 10303-224:2006(E)
Figure 37 — Defined_marking.61
Figure 38 — Defined_thread .62
Figure 39 — Diagonal_knurl .65
Figure 40 — Diameter_dimension_tolerance .66
Figure 41 — Diameter_taper .66
Figure 42 — Diamond_knurl.67
Figure 43 — Distance_along_curve_tolerance.70
Figure 44 — Edge_round.71
Figure 45 — Fillet.76
Figure 46 — Flat_hole_bottom.77
Figure 47 — Flat_slot_end_type.78
Figure 48 — Flatness_tolerance .79
Figure 49 — Gear face_width.81
Figure 50 — Gear nominal_tooth_depth .81
Figure 51 — Gear profile_shift.82
Figure 52 — Gear reference_pressure_angle.83
Figure 53 — Gear root_fillet_radius.83
Figure 54 — Gear tip_diameter .84
Figure 55 — General_boss .84
Figure 56 — General_closed_profile.85
Figure 57 — General_open_profile .86
Figure 58 — General_outside_profile .87
Figure 59 — General_path.88
Figure 60 — General_pattern .88
Figure 61 — General_pocket.90
Figure 62 — General_removal_volume .91
Figure 63 — General_revolution for an outer shape .92
Figure 64 — General_revolution for a volume removal.93
Figure 65 — Groove .96
Figure 66 — Helical_gear.98
Figure 67 — Helical_gear left_or_right_hand_tooth.99
Figure 68 — Helical_gear reference_helix_angle .99
Figure 69 — Implicit_base_shape_representation.100
Figure 70 — Knurl.102
Figure 71 — Linear_path.104
Figure 72 — Linear_profile .105
Figure 73 — Linear_profile_tolerance .106
Figure 74 — Location_dimension_tolerance.106
Figure 75 — Manufactured_assembly and Mating_definition .109
Figure 76 — Ngon_base_shape .115
Figure 77 — Ngon_profile.117
Figure 78 — Open_slot_end_type .120
Figure 79 — Outer_diameter .122
Figure 80 — Outer_diameter_to_shoulder .123
Figure 81 — Parallelism_tolerance for a plane .124
Figure 82 — Parallelism_tolerance for an axis.125
Figure 83 — Partial_circular_path.130
Figure 84 — Partial_circular_profile.131
Figure 85 — Perpendicularity_tolerance for a plane .133
Figure 86 — Perpendicularity_tolerance for a axis .133
©ISO 2006 — All rights reserved v
---------------------- Page: 5 ----------------------
ISO 10303-224:2006(E)
Figure 87 — Planar_face .137
Figure 88 — Planar_pocket_bottom_condition.142
Figure 89 — Position_tolerance .143
Figure 90 — Protrusion .150
Figure 91 — Radial_dimension_tolerance .150
Figure 92 — Radiused_slot_end_type.151
Figure 93 — Recess.152
Figure 94 — Rectangular_boss.153
Figure 95 — Rectangular_closed_pocket .154
Figure 96 — Rectangular_closed_profile .155
Figure 97 — Rectangular_offset_pattern.156
Figure 98 — Rectangular_omit_pattern .157
Figure 99 — Rectangular_open_pocket .158
Figure 100 — Rectangular_pattern.159
Figure 101 — Revolved_flat.164
Figure 102 — Revolved_round.165
Figure 103 — Rib_top .166
Figure 104 — Round_hole.167
Figure 105 — Rounded_end.168
Figure 106 — Rounded_U_profile .170
Figure 107 — Shape_profile.172
Figure 108 — Slot.175
Figure 109 — Spherical_cap.177
Figure 110 — Spherical_hole_bottom.178
Figure 111 — Spur_gear.179
Figure 112 — Square_U_profile.179
Figure 113 — Step.181
Figure 114 — Straight_knurl .182
Figure 115 — Straightness_tolerance.183
Figure 116 — Surface_profile_tolerance.184
Figure 117 — Symmetry_tolerance.185
Figure 118 — Tee_profile .188
Figure 119 — Thread.190
Figure 120 — Through_bottom_condition .193
Figure 121 — Total_runout_tolerance.197
Figure 122 — Turned_knurl .198
Figure 123 — Vee_profile .200
Figure 124 — Woodruff_slot_end_type.202
Figure F.1 — IDEF0 basic notation.910
Figure F.2 — Mechanical products definition for process planning using machining features .921
Figure F.3 — A0 manufacture mechanical parts .922
Figure F.4 — A1 manage manufacturing process .923
Figure F.5 — A13 manage equipment and materials .924
Figure F.6 — A131 manage inventory .925
Figure F.7 — A2 capture digital product definition .926
Figure F.8 — A21 capture part data definition.927
Figure F.9 — A214 create part model .928
Figure F.10 — A3 generate manufacturing data.929
Figure F.11 — A31 generate process plan.930
Figure F.12 — A311 define resources .931
vi ©ISO 2006 — All rights reserved
-------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.