ISO/IEC 13818-2:2000/Amd 3:2010

Information technology — Generic coding of moving pictures and associated audio information: Video — Part 2: — Amendment 3: New level for 1080@50p/60p

Technologies de l'information — Codage générique des images animées et du son associé: Données vidéo — Partie 2: — Amendement 3: Nouveau niveau pour 1080@50p/60p

Informacijska tehnologija - Splošno kodiranje gibljivih slik in pripadajočih avdio informacij: Video Dopolnilo 3: Novi nivo za 1080@50p/60p

Amandma A3:2010 je dodatek k standardu SIST ISO/IEC 13818-2:2005
To priporočilo / mednarodni standard določa kodirano predstavitev slikovnih informacij za digitalne medije za shranjevanje in digitalno video komunikacijo ter določa proces dekodiranja. Prestavitev podpira stalno oddajanje z bitno hitrostjo, oddajanje z spremenljivo bitno hitrostjo, neposreden dostop, preskakovanje kanalov, nadgradljivo dekodiranje, urejevanje bitnega toka ter tudi posebne funkcije, kot je na primer hitro predvajanje, hitro predvajanje nazaj, počasno predvajanje, pavza in zamrznitev slik.  To priporočilo | mednarodni standard je nadalje združljiv z ISO/IEC 11172-2 in kompatibilen navzgor ali navzdol z EDTV, HDTV, SDTV formati. To priporočilo / mednarodni standard velja predvsem za digitalne medije za shranjevanje, video prenos in komunikacijo. Medij za shranjevanje je lahko neposredno priključen na dekoder ali pa preko načinov komunikacije kot so vodila, LAN ali telekomunikacijske povezave.

General Information

• Status: Withdrawn
• Publication Date: 28-Apr-2010
• Withdrawal Date: 28-Apr-2010
• ICS: 35.040 - Information coding
• ICS: 35.040.40 - Coding of audio, video, multimedia and hypermedia information
• Technical Committee: ISO/IEC JTC 1/SC 29 - Coding of audio, picture, multimedia and hypermedia information
• Drafting Committee: ISO/IEC JTC 1/SC 29 - Coding of audio, picture, multimedia and hypermedia information
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 27-Sep-2013
• Ref Project: SIST ISO/IEC 13818-2:2005/Amd 3:2010 - Information technology - Generic coding of moving pictures and associated audio information: Video AMENDMENT 3: New level for 1080@50p/60p

Relations

• Amends: ISO/IEC 13818-2:2000 - Information technology — Generic coding of moving pictures and associated audio information: Video — Part 2:
• Effective Date: 06-Jun-2022
• Child: ISO/IEC 13818-2:2000 - Information technology — Generic coding of moving pictures and associated audio information: Video — Part 2:
• Effective Date: 20-Jun-2008
• Revised: ISO/IEC 13818-2:2013 - Information technology — Generic coding of moving pictures and associated audio information — Part 2: Video
• Effective Date: 06-Jun-2022

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 13818-2
Second edition
2000-12-15
AMENDMENT 3
2010-05-01

Information technology — Generic coding
of moving pictures and associated audio
information: Video —
AMENDMENT 3:
New level for 1080@50p/60p
Technologies de l'information — Codage générique des images
animées et du son associé: Données vidéo —
AMENDEMENT 3: Nouveau niveau pour 1080@50p/60p




Reference number
ISO/IEC 13818-2:2000/Amd.3:2010(E)
©
ISO/IEC 2010

---------------------- Page: 1 ----------------------
ISO/IEC 13818-2:2000/Amd.3:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO/IEC 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO/IEC 2010 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 13818-2:2000/Amd.3:2010(E)
Contents Page


1) Clause 8, Table 8-3 . 1
2) Clause 8.3 and Table 8-8. 1
3) Clause 8.5, Table 8-11. 3
4) Clause 8.5, Table 8-12. 4
5) Clause 8.6, Table 8-13. 5
6) Clause 8.6, Table 8-14. 5
7) Clause 8.6, Table 8-15. 6
8) Clause E.2, Table E.20 . 6
9) Clause E.2, Table E.25bis. 7

© ISO/IEC 2010 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/IEC 13818-2:2000/Amd.3:2010(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as
an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
ISO/IEC 13818-2:2000/Amd.3:2009 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information
technology, Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia information, in
collaboration with ITU-T. The identical text is published as ITU-T Rec. H.262 (2000)/Amd.3 (2009).

iv © ISO/IEC 2010 – All rights reserved

---------------------- Page: 4 ----------------------
ISO/IEC 13818-2:2000/Amd.3:2010 (E)
INTERNATIONAL STANDARD
RECOMMENDATION ITU-T
Information technology – Generic coding of moving pictures and
associated audio information: Video
Amendment 3

New level for 1080@50p/60p
1) Clause 8, Table 8-3
In clause 8, replace Table 8-3 with:
Table 8-3 – Level identification
Level identification Level
1011 to 1111 (Reserved)
1010 Low
1001 (Reserved)
1000 Main
0111 (Reserved)
0110 High 1440
0101 (Reserved)
0100 High
0011 (Reserved)
0010 HighP
0000 and 0001 (Reserved)
2) Clause 8.3 and Table 8-8
Replace clause 8.3 and Table 8-8 with:
8.3 Relationship between defined levels
The Low, Main, High-1440, High and HighP levels have a hierarchical relationship. Therefore the parameter constraints
of a 'higher' level equal or exceed the constraints of 'lower' levels (e.g., for a given profile, a Main level decoder shall be
able to decode a bitstream conforming to Low level restrictions). The order of hierarchy is given in Table 8-3.
The different parameter constraints for levels are given in Table 8-8.
 Rec. ITU-T H.262 (2000)/Amd.3 (03/2009) 1

---------------------- Page: 5 ----------------------
ISO/IEC 13818-2:2000/Amd.3:2010 (E)
Table 8-8 – Parameter constraints for levels
Level
Syntactic Element Low Main High-1440 High HighP
f_code[0][0] (forward horizontal) [1:7] [1:8] [1:9] [1:9] [1:9]
a)
f_code[1][0] (backward horizontal) [1:7] [1:8] [1:9] [1:9] [1:9]
frame_rate_code [1:5] [1:5] [1:8] [1:8] [1:8]
picture_structure '01', '10', '11' '01', '10', '11' '01', '10', '11' '01', '10', '11' '11'
frame_pred_frame_dct [0:1] [0:1] [0:1] [0:1] 1
  Sample Density Table 8-11
  Luminance Sample Rate Table 8-12
  Maximum Bit Rate Table 8-13
  Buffer Size Table 8-14
Frame picture
  f_code[0][1] (forward vertical) [1:4] [1:5] [1:5] [1:5] [1:5]
a)
  f_code[1][1] (backward vertical) [1:4] [1:5] [1:5] [1:5] [1:5]
b)
  Vertical vector range [–64:63,5] [–128:127,5] [–128:127,5] [–128:127,5] [–128:127,5]
Field picture
c)
  f_code[0][1] (forward vertical) [1:3] [1:4] [1:4] [1:4] NA
a) c)
  f_code[1][1] (backward vertical) [1:3] [1:4] [1:4] [1:4] NA
b) c)
  Vertical vector range [–32:31,5] [–64:63,5] [–64:63,5] [–64:63,5] NA
a)
For Simple profile bitstreams which do not include B-pictures, f_code[1][0] and f_code[1][1] shall be set to 15 (not used).
b)
This restriction applies to the final reconstructed motion vector. In the case of dual prime motion vectors, this restriction
applies to all the following values:
vector'[0][0][1]
((vector'[0][0][1] * m[parity_ref][parity_pred])//2)
((vector'[0][0][1] * m[parity_ref][parity_pred])//2) + e[parity_ref][parity_pred]
((vector'[0][0][1] * m[parity_ref][parity_pred])//2) + dmvector[1]
((vector'[0][0][1] * m[parity_ref][parity_pred])//2) + e[parity_ref][parity_
...

SLOVENSKI STANDARD
SIST ISO/IEC 13818-2:2005/Amd 3:2010
01-oktober-2010
,QIRUPDFLMVNDWHKQRORJLMD6SORãQRNRGLUDQMHJLEOMLYLKVOLNLQSULSDGDMRþLKDYGLR
LQIRUPDFLM9LGHR
'RSROQLOR1RYLQLYR]D#SS
,QIRUPDWLRQWHFKQRORJ\*HQHULFFRGLQJRIPRYLQJSLFWXUHVDQGDVVRFLDWHGDXGLR
LQIRUPDWLRQ9LGHR
$0(1'0(171HZOHYHOIRU#SS
7HFKQRORJLHVGHO
LQIRUPDWLRQ&RGDJHJpQpULTXHGHVLPDJHVDQLPpHVHWGXVRQ
DVVRFLp'RQQpHVYLGpR
$0(1'(0(171RXYHDXQLYHDXSRXU#SS
Ta slovenski standard je istoveten z: ISO/IEC 13818-2:2000/Amd 3:2010
ICS:
35.040 Nabori znakov in kodiranje Character sets and
informacij information coding
SIST ISO/IEC 13818-2:2005/Amd 3:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO/IEC 13818-2:2005/Amd 3:2010

---------------------- Page: 2 ----------------------

SIST ISO/IEC 13818-2:2005/Amd 3:2010

INTERNATIONAL ISO/IEC
STANDARD 13818-2
Second edition
2000-12-15
AMENDMENT 3
2010-05-01

Information technology — Generic coding
of moving pictures and associated audio
information: Video —
AMENDMENT 3:
New level for 1080@50p/60p
Technologies de l'information — Codage générique des images
animées et du son associé: Données vidéo —
AMENDEMENT 3: Nouveau niveau pour 1080@50p/60p




Reference number
ISO/IEC 13818-2:2000/Amd.3:2010(E)
©
ISO/IEC 2010

---------------------- Page: 3 ----------------------

SIST ISO/IEC 13818-2:2005/Amd 3:2010
ISO/IEC 13818-2:2000/Amd.3:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO/IEC 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO/IEC 2010 – All rights reserved

---------------------- Page: 4 ----------------------

SIST ISO/IEC 13818-2:2005/Amd 3:2010
ISO/IEC 13818-2:2000/Amd.3:2010(E)
Contents Page


1) Clause 8, Table 8-3 . 1
2) Clause 8.3 and Table 8-8. 1
3) Clause 8.5, Table 8-11. 3
4) Clause 8.5, Table 8-12. 4
5) Clause 8.6, Table 8-13. 5
6) Clause 8.6, Table 8-14. 5
7) Clause 8.6, Table 8-15. 6
8) Clause E.2, Table E.20 . 6
9) Clause E.2, Table E.25bis. 7

© ISO/IEC 2010 – All rights reserved iii

---------------------- Page: 5 ----------------------

SIST ISO/IEC 13818-2:2005/Amd 3:2010
ISO/IEC 13818-2:2000/Amd.3:2010(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as
an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
ISO/IEC 13818-2:2000/Amd.3:2009 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information
technology, Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia information, in
collaboration with ITU-T. The identical text is published as ITU-T Rec. H.262 (2000)/Amd.3 (2009).

iv © ISO/IEC 2010 – All rights reserved

---------------------- Page: 6 ----------------------

SIST ISO/IEC 13818-2:2005/Amd 3:2010
ISO/IEC 13818-2:2000/Amd.3:2010 (E)
INTERNATIONAL STANDARD
RECOMMENDATION ITU-T
Information technology – Generic coding of moving pictures and
associated audio information: Video
Amendment 3

New level for 1080@50p/60p
1) Clause 8, Table 8-3
In clause 8, replace Table 8-3 with:
Table 8-3 – Level identification
Level identification Level
1011 to 1111 (Reserved)
1010 Low
1001 (Reserved)
1000 Main
0111 (Reserved)
0110 High 1440
0101 (Reserved)
0100 High
0011 (Reserved)
0010 HighP
0000 and 0001 (Reserved)
2) Clause 8.3 and Table 8-8
Replace clause 8.3 and Table 8-8 with:
8.3 Relationship between defined levels
The Low, Main, High-1440, High and HighP levels have a hierarchical relationship. Therefore the parameter constraints
of a 'higher' level equal or exceed the constraints of 'lower' levels (e.g., for a given profile, a Main level decoder shall be
able to decode a bitstream conforming to Low level restrictions). The order of hierarchy is given in Table 8-3.
The different parameter constraints for levels are given in Table 8-8.
 Rec. ITU-T H.262 (2000)/Amd.3 (03/2009) 1

---------------------- Page: 7 ----------------------

SIST ISO/IEC 13818-2:2005/Amd 3:2010
ISO/IEC 13818-2:2000/Amd.3:2010 (E)
Table 8-8 – Parameter constraints for levels
Level
Syntactic Element Low Main High-1440 High HighP
f_code[0][0] (forward horizontal) [1:7] [1:8] [1:9] [1:9] [1:9]
a)
f_code[1][0] (backward horizontal) [1:7] [1:8] [1:9] [1:9] [1:9]
frame_rate_code [1:5] [1:5] [1:8] [1:8] [1:8]
picture_structure '01', '10', '11' '01', '10', '11' '01', '10', '11' '01', '10', '11' '11'
frame_pred_frame_dct [0:1] [0:1] [0:1] [0:1] 1
  Sample Density Table 8-11
  Luminance Sample Rate Table 8-12
  Maximum Bit Rate Table 8-13
  Buffer Size Table 8-14
Frame picture
  f_code[0][1] (forward vertical) [1:4] [1:5] [1:5] [1:5] [1:5]
a)
  f_code[1][1] (backward vertical) [1:4] [1:5] [1:5] [1:5] [1:5]
b)
  Vertical vector range [–64:63,5] [–128:127,5] [–128:127,5] [–128:127,5] [–128:127,5]
Field picture
c)
  f_code[0][1] (forward vertical) [1:3] [1:4] [1:4] [1:4] NA
a) c)
  f_code[1][1] (backward vertical) [1:3] [1:4] [1:4] [1:4] NA
b) c)
  Vertical vector range [–32:31,5] [–64:63,5] [–64:63,5] [–64:63,5] NA
a)
For Simple
...

SLOVENSKI STANDARD
SIST ISO/IEC 13818-2:2005/oAmd 3:2010
01-julij-2010
,QIRUPDFLMVNDWHKQRORJLMD6SORãQRNRGLUDQMHJLEOMLYLKVOLNLQSULSDGDMRþLKDYGLR
LQIRUPDFLM9LGHR
'RSROQLOR1RYLQLYR]D#SS
,QIRUPDWLRQWHFKQRORJ\*HQHULFFRGLQJRIPRYLQJSLFWXUHVDQGDVVRFLDWHGDXGLR
LQIRUPDWLRQ9LGHR
$0(1'0(171HZOHYHOIRU#SS
7HFKQRORJLHVGHO
LQIRUPDWLRQ&RGDJHJpQpULTXHGHVLPDJHVDQLPpHVHWGXVRQ
DVVRFLp'RQQpHVYLGpR
$0(1'(0(171RXYHDXQLYHDXSRXU#SS
Ta slovenski standard je istoveten z: ISO/IEC 13818-2:2000/Amd 3:2010
ICS:
35.040 Nabori znakov in kodiranje Character sets and
informacij information coding
SIST ISO/IEC 13818-2:2005/oAmd en
3:2010
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO/IEC 13818-2:2005/oAmd 3:2010

---------------------- Page: 2 ----------------------

SIST ISO/IEC 13818-2:2005/oAmd 3:2010

INTERNATIONAL ISO/IEC
STANDARD 13818-2
Second edition
2000-12-15
AMENDMENT 3
2010-05-01

Information technology — Generic coding
of moving pictures and associated audio
information: Video —
AMENDMENT 3:
New level for 1080@50p/60p
Technologies de l'information — Codage générique des images
animées et du son associé: Données vidéo —
AMENDEMENT 3: Nouveau niveau pour 1080@50p/60p




Reference number
ISO/IEC 13818-2:2000/Amd.3:2010(E)
©
ISO/IEC 2010

---------------------- Page: 3 ----------------------

SIST ISO/IEC 13818-2:2005/oAmd 3:2010
ISO/IEC 13818-2:2000/Amd.3:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO/IEC 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO/IEC 2010 – All rights reserved

---------------------- Page: 4 ----------------------

SIST ISO/IEC 13818-2:2005/oAmd 3:2010
ISO/IEC 13818-2:2000/Amd.3:2010(E)
Contents Page


1) Clause 8, Table 8-3 . 1
2) Clause 8.3 and Table 8-8. 1
3) Clause 8.5, Table 8-11. 3
4) Clause 8.5, Table 8-12. 4
5) Clause 8.6, Table 8-13. 5
6) Clause 8.6, Table 8-14. 5
7) Clause 8.6, Table 8-15. 6
8) Clause E.2, Table E.20 . 6
9) Clause E.2, Table E.25bis. 7

© ISO/IEC 2010 – All rights reserved iii

---------------------- Page: 5 ----------------------

SIST ISO/IEC 13818-2:2005/oAmd 3:2010
ISO/IEC 13818-2:2000/Amd.3:2010(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as
an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
ISO/IEC 13818-2:2000/Amd.3:2009 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information
technology, Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia information, in
collaboration with ITU-T. The identical text is published as ITU-T Rec. H.262 (2000)/Amd.3 (2009).

iv © ISO/IEC 2010 – All rights reserved

---------------------- Page: 6 ----------------------

SIST ISO/IEC 13818-2:2005/oAmd 3:2010
ISO/IEC 13818-2:2000/Amd.3:2010 (E)
INTERNATIONAL STANDARD
RECOMMENDATION ITU-T
Information technology – Generic coding of moving pictures and
associated audio information: Video
Amendment 3

New level for 1080@50p/60p
1) Clause 8, Table 8-3
In clause 8, replace Table 8-3 with:
Table 8-3 – Level identification
Level identification Level
1011 to 1111 (Reserved)
1010 Low
1001 (Reserved)
1000 Main
0111 (Reserved)
0110 High 1440
0101 (Reserved)
0100 High
0011 (Reserved)
0010 HighP
0000 and 0001 (Reserved)
2) Clause 8.3 and Table 8-8
Replace clause 8.3 and Table 8-8 with:
8.3 Relationship between defined levels
The Low, Main, High-1440, High and HighP levels have a hierarchical relationship. Therefore the parameter constraints
of a 'higher' level equal or exceed the constraints of 'lower' levels (e.g., for a given profile, a Main level decoder shall be
able to decode a bitstream conforming to Low level restrictions). The order of hierarchy is given in Table 8-3.
The different parameter constraints for levels are given in Table 8-8.
 Rec. ITU-T H.262 (2000)/Amd.3 (03/2009) 1

---------------------- Page: 7 ----------------------

SIST ISO/IEC 13818-2:2005/oAmd 3:2010
ISO/IEC 13818-2:2000/Amd.3:2010 (E)
Table 8-8 – Parameter constraints for levels
Level
Syntactic Element Low Main High-1440 High HighP
f_code[0][0] (forward horizontal) [1:7] [1:8] [1:9] [1:9] [1:9]
a)
f_code[1][0] (backward horizontal) [1:7] [1:8] [1:9] [1:9] [1:9]
frame_rate_code [1:5] [1:5] [1:8] [1:8] [1:8]
picture_structure '01', '10', '11' '01', '10', '11' '01', '10', '11' '01', '10', '11' '11'
frame_pred_frame_dct [0:1] [0:1] [0:1] [0:1] 1
  Sample Density Table 8-11
  Luminance Sample Rate Table 8-12
  Maximum Bit Rate Table 8-13
  Buffer Size Table 8-14
Frame picture
  f_code[0][1] (forward vertical) [1:4] [1:5] [1:5] [1:5] [1:5]
a)
  f_code[1][1] (backward vertical) [1:4] [1:5] [1:5] [1:5] [1:5]
b)
  Vertical vector range [–64:63,5] [–128:127,5] [–128:127,5] [–128:127,5] [–128:127,5]
Field picture
c)
  f_code[0][1] (forward vertical) [1:3] [1:4] [1:4] [1:4] NA
a) c)
  f_code[1][1] (backward vertical) [1:3] [1:4] [1:4] [1:4] NA
b) c)
  Vertical vector range [–32:31,5] [–64:63,5] [–64:63,5] [–64:63,5] NA
a)
For Simpl
...