ISO 3164:2013/Amd 1

Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection-limiting volume — Amendment 1

Engins de terrassement — Étude en laboratoire des structures de protection — Spécifications pour le volume limite de déformation — Amendement 1

General Information

• Status: Not Published
• ICS: 53.100 - Earth-moving machinery
• Technical Committee: ISO/TC 127/SC 2 - Safety, ergonomics and general requirements
• Drafting Committee: ISO/TC 127/SC 2 - Safety, ergonomics and general requirements
• Current Stage: 6000 - International Standard under publication
• Completion Date: 08-Nov-2023

Relations

• Amends: ISO 3164:2013 - Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection-limiting volume
• Effective Date: 07-Aug-2021

Standards Content (Sample)

FINAL
AMENDMENT ISO
DRAFT
3164:2013
FDAM 1
ISO/TC 127/SC 2
Earth-moving machinery —
Secretariat: ANSI
Laboratory evaluations of protective
Voting begins on:
2023-09-12 structures — Specifications for
deflection-limiting volume
Voting terminates on:
2023-11-07
AMENDMENT 1
Engins de terrassement — Étude en laboratoire des structures de
protection — Spécifications pour le volume limite de déformation
AMENDEMENT 1
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO 3164:2013/FDAM 1:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 1 ----------------------
ISO 3164:2013/FDAM 1:2023(E)
FINAL
AMENDMENT ISO
DRAFT
3164:2013
FDAM 1
ISO/TC 127/SC 2
Earth-moving machinery —
Secretariat: ANSI
Laboratory evaluations of protective
Voting begins on:
structures — Specifications for
deflection-limiting volume
Voting terminates on:
AMENDMENT 1
Engins de terrassement — Étude en laboratoire des structures de
protection — Spécifications pour le volume limite de déformation
AMENDEMENT 1
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
ISO/CEN PARALLEL PROCESSING
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: [phone]
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: [e-mail]
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO 3164:2013/FDAM 1:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN­
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
  © ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 2 ----------------------
ISO 3164:2013/FDAM 1:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non­governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use
of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed
patent rights in respect thereof. As of the date of publication of this document, ISO had not received
notice of (a) patent(s) which may be required to implement this document. However, implementers are
cautioned that this may not represent the latest information, which may be obtained from the patent
database available at www.iso.org/patents. ISO shall not be held responsible for identifying any or all
such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC
...

© ISO 2020 – All rights reserved
ISO 3164 FDAM:2013/FDAmd 1
ISO/TC 127/SC 2
Secretariat: ANSI
Date: 2023-08-24
Earth-moving machinery — Laboratory evaluations of protective
structures — Specifications for deflection-limiting volume –
Amendment
AMENDMENT 1
Engins de terrassement — Étude en laboratoire des structures de protection — Spécifications pour le
volume limite de déformation
AMENDEMENT 1
FDIS stage
© ISO 2023 – All rights reserved

---------------------- Page: 1 ----------------------
ISO 3164:2013 / FDAM/FDAmd 1:2021(E)
© ISO 20202013
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
EmailE-mail: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 3164:2013 / FDAM/FDAmd 1:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documentsdocument should be noted. This document was drafted in accordance
with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawnISO draws attention to the possibility that some of the elementsimplementation of this
document may beinvolve the subjectuse of (a) patent(s). ISO takes no position concerning the evidence,
validity or applicability of any claimed patent rights in respect thereof. As of the date of publication of
this document, ISO had not received notice of (a) patent(s) which may be required to implement this
document. However, implementers are cautioned that this may not represent the latest information,
which may be obtained from the patent database available at www.iso.org/patents. ISO shall not be held
responsible for identifying any or all such patent rights. Details of any patent rights identified during the
development of the document will be in the Introduction and/or on the ISO list of patent declarations
received (see ).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the World
Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 127, Earth-moving machinery,
Subcommittee SC 2, Safety, ergonomics and general requirements., in collaboration with the European
Committee for Standardization (CEN) Technical Committee CEN/TC 151, Construction equipment and
building material machines - Safety, in accordance with the Agreement on technical cooperation between
ISO and CEN (Vienna Agreement).
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.


© ISO 2020 2023 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 3164:2013/FDAmd 1(E)
Earth-moving machinery — Earth-moving machinery —
Laboratory evaluations of protective structures — Specifications
for deflection-limiting volume – Amendment
AMENDMENT 1

4.4
Replace the paragraph with the following:
The DLV may be constructed so that the upper portion of the DLV can be rotated laterally and/or
longitudinally about the SIP up to 16°. The portion of the DLV below the SIP does not rotate. See examples
of rotation of the DLV given in Figure 4.
NOTE During TOPS and ROPS testing, it is permissible for the upper portion of the DLV to be rotated in accordan
...

PROJET
AMENDEMENT ISO
FINAL
3164:2013
FDAM 1
ISO/TC 127/SC 2
Engins de terrassement — Étude
Secrétariat: ANSI
en laboratoire des structures de
Début de vote:
2023-09-12 protection — Spécifications pour le
volume limite de déformation
Vote clos le:
2023-11-07
AMENDEMENT 1
Earth-moving machinery — Laboratory evaluations of protective
structures — Specifications for deflection-limiting volume
AMENDMENT 1
TRAITEMENT PARALLÈLE ISO/CEN
LES DESTINATAIRES DU PRÉSENT PROJET SONT
INVITÉS À PRÉSENTER, AVEC LEURS OBSER-
VATIONS, NOTIFICATION DES DROITS DE PRO-
PRIÉTÉ DONT ILS AURAIENT ÉVENTUELLEMENT
CONNAISSANCE ET À FOURNIR UNE DOCUMEN-
TATION EXPLICATIVE.
OUTRE LE FAIT D’ÊTRE EXAMINÉS POUR
ÉTABLIR S’ILS SONT ACCEPTABLES À DES FINS
INDUSTRIELLES, TECHNOLOGIQUES ET COM-
Numéro de référence
MERCIALES, AINSI QUE DU POINT DE VUE
ISO 3164:2013/FDAM 1:2023(F)
DES UTILISATEURS, LES PROJETS DE NORMES
INTERNATIONALES DOIVENT PARFOIS ÊTRE
CONSIDÉRÉS DU POINT DE VUE DE LEUR POSSI-
BILITÉ DE DEVENIR DES NORMES POUVANT
SERVIR DE RÉFÉRENCE DANS LA RÉGLEMENTA-
TION NATIONALE. © ISO 2023

---------------------- Page: 1 ----------------------
ISO 3164:2013/FDAM 1:2023(F)
PROJET
AMENDEMENT ISO
FINAL
3164:2013
FDAM 1
ISO/TC 127/SC 2
Engins de terrassement — Étude
Secrétariat: ANSI
en laboratoire des structures de
Début de vote:
2023-09-12 protection — Spécifications pour le
volume limite de déformation
Vote clos le:
2023-11-07
AMENDEMENT 1
Earth-moving machinery — Laboratory evaluations of protective
structures — Specifications for deflection-limiting volume
AMENDMENT 1
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2023
TRAITEMENT PARALLÈLE ISO/CEN
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
LES DESTINATAIRES DU PRÉSENT PROJET SONT
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
INVITÉS À PRÉSENTER, AVEC LEURS OBSER-
VATIONS, NOTIFICATION DES DROITS DE PRO-
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
PRIÉTÉ DONT ILS AURAIENT ÉVENTUELLEMENT
ISO copyright office
CONNAISSANCE ET À FOURNIR UNE DOCUMEN-
TATION EXPLICATIVE.
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève OUTRE LE FAIT D’ÊTRE EXAMINÉS POUR
ÉTABLIR S’ILS SONT ACCEPTABLES À DES FINS
Tél.: [phone]
INDUSTRIELLES, TECHNOLOGIQUES ET COM-
Numéro de référence
E-mail: [e-mail]
MERCIALES, AINSI QUE DU POINT DE VUE
ISO 3164:2013/FDAM 1:2023(F)
Web: www.iso.org
DES UTILISATEURS, LES PROJETS DE NORMES
INTERNATIONALES DOIVENT PARFOIS ÊTRE
Publié en Suisse
CONSIDÉRÉS DU POINT DE VUE DE LEUR POSSI-
BILITÉ DE DEVENIR DES NORMES POUVANT
SERVIR DE RÉFÉRENCE DANS LA RÉGLEMENTA-
ii
  © ISO 2023 – Tous droits réservés
TION NATIONALE. © ISO 2023

---------------------- Page: 2 ----------------------
ISO 3164:2013/FDAM 1:2023(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes
nationaux de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est
en général confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l'ISO participent également aux travaux.
L'ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d'approbation requis pour les différents types de documents ISO. Le présent document a
été rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir
www.iso.org/directives).
L’ISO attire l’attention sur le fait que la mise en application du présent document peut entraîner
l’utilisation d’un ou de plusieurs brevets. L’ISO ne prend pas position quant à la preuve, à la validité
et à l’applicabilité de tout droit de propriété revendiqué à cet égard. À la date de publication du
présent document, l’ISO [avait/n'avait pas] reçu notification qu’un ou plusieurs brevets pouvaient
être nécessaires à sa mise en application. Toutefois, il y a lieu d’avertir les responsables de la mise en
application du présent document que des informations plus récentes sont susceptibles de figurer dans
la base de données de brevets, disponible à l'adresse www.iso.org/brevets. L’ISO ne saurait être tenue
pour responsable de ne pas avoir identifié tout ou partie de tels droits de propr
...