SIST EN 60512-12-5:2006

Connectors for electronic equipment - Tests and measurements -- Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method

This part of IEC 60512, when required by the detail specification, is used for testing connectors within the scope of IEC technical committee 48. They may also be used for similar devices when specified in a detail specification. The object of this part of IEC 60512 is to detail a standard test method to assess the ability of a connector to withstand the heating stresses produced by a soldering iron.

Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren -- Teil 12-5: Prüfungen der Lötbarkeit - Prüfung 12e: Lötwärmebeständigkeit, Lötkolbenverfahren

Connecteurs pour équipements électroniques - Essais et mesures -- Partie 12-5: Essais de soudure - Essai 12e: Résistance à la chaleur de soudage, méthode du fer à souder

Précise une méthode d'essai normalisée pour la capacité d'un connecteur à résister aux contraintes d'échauffement produites par un fer à braser.

Konektorji za elektronsko opremo – Preskusi in meritve – 12-5. del: Spajkalni preskusi – Preskus 12e: Odpornost proti spajkalni temperaturi, metoda s spajkalnikom (IEC 60512-12-5:2006)

General Information

• Status: Published
• Publication Date: 30-Jun-2006
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jul-2006
• Due Date: 01-Jul-2006
• Completion Date: 01-Jul-2006
• Ref Project: EN 60512-12-5:2006 - Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method

Standards Content (Sample)

SLOVENSKI SIST EN 60512-12-5:2006

STANDARD
julij 2006
Konektorji za elektronsko opremo – Preskusi in meritve – 12-5. del: Spajkalni
preskusi – Preskus 12e: Odpornost proti spajkalni temperaturi, metoda s
spajkalnikom (IEC 60512-12-5:2006)
Connectors for electronic equipment - Tests and measurements - Part 12-5:
Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method
(IEC 60512-12-5:2006)
ICS 31.220.10 Referenčna številka
SIST EN 60512-12-5:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 60512-12-5

NORME EUROPÉENNE
March 2006
EUROPÄISCHE NORM

ICS 31.220.10


English version


Connectors for electronic equipment -
Tests and measurements
Part 12-5: Soldering tests -
Test 12e: Resistance to soldering heat, soldering iron method
(IEC 60512-12-5:2006)


Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Einrichtungen -
Essais et mesures Mess- und Prüfverfahren
Partie 12-5: Essais de soudure - Teil 12-5: Prüfungen der Lötbarkeit -
Essai 12e: Résistance à la chaleur Prüfung 12e: Lötwärmebeständigkeit,
de soudage, méthode du fer à souder Lötkolbenverfahren
(CEI 60512-12-5:2006) (IEC 60512-12-5:2006)




This European Standard was approved by CENELEC on 2006-03-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60512-12-5:2006 E

---------------------- Page: 2 ----------------------

EN 60512-12-5:2006 - 2 -
Foreword
The text of document 48B/1580/FDIS, future edition 1 of IEC 60512-12-5, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60512-12-5 on 2006-03-01.
This standard is to be read in conjunction with EN 60512-1 and EN 60512-1-100 which explains the
structure of the EN 60512 series.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-12-01
– latest date by which the national standards conflicting
(dow) 2009-03-01
with the EN have to be withdrawn
This European Standard makes reference to International Standards. Where the International Standard
referred to has been endorsed as a European Standard or a home-grown European Standard exists, this
European Standard shall be applied instead. Pertinent information can be found on the CENELEC web
site.
__________
Endorsement notice
The text of the International Standard IEC 60512-12-5:2006 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

NORME CEI
INTERNATIONALE
IEC



60512-12-5
INTERNATIONAL


Première édition
STANDARD

First edition

2006-02


Connecteurs pour équipements électroniques –
Essais et mesures –
Partie 12-5:
Essais de soudure –
Essai 12e: Résistance à la chaleur de soudage,
méthode du fer à souder

Connectors for electronic equipment –
Tests and measurements –
Part 12-5:
Soldering tests –
Test 12e: Resistance to soldering heat,
soldering iron method
 IEC 2006 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
E
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 4 ----------------------

60512-12-5  IEC:2006 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

CONNECTORS FOR ELECTRONIC EQUIPMENT –
TESTS AND MEASUREMENTS –

Part 12-5: Soldering tests –
Test 12e: Resistance to soldering heat,
soldering iron method


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this prepar
...