Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method

Details a standard test method to assess the ability of a connector to withstand the heating stresses produced by a soldering iron.

Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 12-5: Prüfungen der Lötbarkeit - Prüfung 12e: Lötwärmebeständigkeit, Lötkolbenverfahren

Connecteurs pour équipements électroniques - Essais et mesures - Partie 12-5: Essais de soudure - Essai 12e: Résistance à la chaleur de soudage, méthode du fer à souder

Précise une méthode d'essai normalisée pour la capacité d'un connecteur à résister aux contraintes d'échauffement produites par un fer à braser.

Konektorji za elektronsko opremo – Preskusi in meritve – 12-5. del: Spajkalni preskusi – Preskus 12e: Odpornost proti spajkalni temperaturi, metoda s spajkalnikom (IEC 60512-12-5:2006)

General Information

Status
Published
Publication Date
23-Mar-2006
Withdrawal Date
28-Feb-2009
Technical Committee
Drafting Committee
Parallel Committee
Current Stage
6060 - Document made available - Publishing
Start Date
24-Mar-2006
Completion Date
24-Mar-2006

Buy Standard

Standard
EN 60512-12-5:2006
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST EN 60512-12-5:2006

STANDARD
julij 2006
Konektorji za elektronsko opremo – Preskusi in meritve – 12-5. del: Spajkalni
preskusi – Preskus 12e: Odpornost proti spajkalni temperaturi, metoda s
spajkalnikom (IEC 60512-12-5:2006)
Connectors for electronic equipment - Tests and measurements - Part 12-5:
Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method
(IEC 60512-12-5:2006)
ICS 31.220.10 Referenčna številka
SIST EN 60512-12-5:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 60512-12-5

NORME EUROPÉENNE
March 2006
EUROPÄISCHE NORM

ICS 31.220.10


English version


Connectors for electronic equipment -
Tests and measurements
Part 12-5: Soldering tests -
Test 12e: Resistance to soldering heat, soldering iron method
(IEC 60512-12-5:2006)


Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Einrichtungen -
Essais et mesures Mess- und Prüfverfahren
Partie 12-5: Essais de soudure - Teil 12-5: Prüfungen der Lötbarkeit -
Essai 12e: Résistance à la chaleur Prüfung 12e: Lötwärmebeständigkeit,
de soudage, méthode du fer à souder Lötkolbenverfahren
(CEI 60512-12-5:2006) (IEC 60512-12-5:2006)




This European Standard was approved by CENELEC on 2006-03-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60512-12-5:2006 E

---------------------- Page: 2 ----------------------

EN 60512-12-5:2006 - 2 -
Foreword
The text of document 48B/1580/FDIS, future edition 1 of IEC 60512-12-5, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60512-12-5 on 2006-03-01.
This standard is to be read in conjunction with EN 60512-1 and EN 60512-1-100 which explains the
structure of the EN 60512 series.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-12-01
– latest date by which the national standards conflicting
(dow) 2009-03-01
with the EN have to be withdrawn
This European Standard makes reference to International Standards. Where the International Standard
referred to has been endorsed as a European Standard or a home-grown European Standard exists, this
European Standard shall be applied instead. Pertinent information can be found on the CENELEC web
site.
__________
Endorsement notice
The text of the International Standard IEC 60512-12-5:2006 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

NORME CEI
INTERNATIONALE
IEC



60512-12-5
INTERNATIONAL


Première édition
STANDARD

First edition

2006-02


Connecteurs pour équipements électroniques –
Essais et mesures –
Partie 12-5:
Essais de soudure –
Essai 12e: Résistance à la chaleur de soudage,
méthode du fer à souder

Connectors for electronic equipment –
Tests and measurements –
Part 12-5:
Soldering tests –
Test 12e: Resistance to soldering heat,
soldering iron method
 IEC 2006 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procéd
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.