SIST ISO 15:1995

Rolling bearings -- Radial bearings -- Boundary dimensions -- General plan

Roulements -- Roulements radiaux -- Dimensions d'encombrement -- Plan général

Kotalni ležaji - Radialni ležaji - Glavne mere, preglednice mer

General Information

• Status: Withdrawn
• Publication Date: 31-Oct-1995
• Withdrawal Date: 29-Jan-2015
• ICS: 21.100.20 - Rolling bearings
• Technical Committee: ISEL - Mechanical elements
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 27-Jan-2015
• Due Date: 19-Feb-2015
• Completion Date: 30-Jan-2015
• Ref Project: ISO 15:1981 - Rolling bearings — Radial bearings — Boundary dimensions — General plan

Relations

• Replaced By: SIST ISO 15:2015 - Rolling bearings - Radial bearings - Boundary dimensions, general plan
• Effective Date: 01-Mar-2015

Standards Content (Sample)

International Standard
15
INTERNATIONAL ORGANIZATION FOR STANDARDIZATlON*MEKLIYHAPOL1HAR OPrAHH3AUMR fl0 CTAHAAPTH3AUMM.ORGANlSATlON INTERNATIONALE DE NORMALISATION
Rolling bearings - Radial bearings - Boundary
0 dimensions - General plan
Roulements - Roulements radiaux - Dimensions d'encombrement - Plan gknkral
First edition - 1981-12-15
Ref. No. IS0 15-1981 (E)
UDC 621.822.84
w
-
Descriptors : bearings, rolling bearings, radial bearings, dimensions.
8
7
P
U
Price based on 16 pages
v,

---------------------- Page: 1 ----------------------
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards institutes (IS0 member bodies). The work of developing Inter-
national Standards is carried out through IS0 technical committees. Every member
in a subject for which a technical committee has been set up has the
body interested
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council.
International Standard IS0 15 was developed by Technical Committee ISO/TC 4,
Rolling bearings, and was circulated to the member bodies in January 1981.
It has been approved by the member bodies of the following countries :
Australia Hungary Romania
Austria India South Africa, Rep. of
Italy Spain
Brazil
Canada Japan Sweden
Switzerland
China Korea, Dem. P. Rep. of
Czechoslovakia Korea, Rep. of United Kingdom
Egypt, Arab Rep. of Mexico USA
Netherlands USSR
France
Germany, F. R. Poland
No member body expressed disapproval of the document.
IS0 Recommendations R 15/ 1-1968
This International Standard cancels and replaces
and R 15/2-1970, of which it constitutes a technical revision.
0 International Organization for Standardization, 1981 O
Printed in Switzerland

---------------------- Page: 2 ----------------------
INTERNATIONAL STANDARD IS0 15-1981 (E)
Rolling bearings - Radial bearings - Boundary
dimensions - General plan
O Introduction stages of design for information regarding availability of the
bearings.
The object of the gener;. jlan is to restrict the number of radial
bearing sizes enough to ensure economic production and yet to The chamfer dimensions given in tables 1 to 8 do not necess-
arily apply to
provide a sufficient number of sizes to satisfy present and
future needs of bearing users. These needs are very com-
prehensive and varying. Therefore the plan has to embrace a a) the groove side of bearing rings with snap ring groove;
wide range of numerically determined sizes and proportions
and may even be extended by IS0 in accordance with the rules b) the non-rib side of thin cylindrical roller bearing rings;
given in the annex.
c) the non-thrust side of angular contact bearing rings;
1 Scope and field of application d) inner rings of bearings with tapered bore.
This International Standard lays down preferred boundary The general plan does not contain any recommendations per-
dimensions for radial bearings. taining to the internal design of bearings.
The tapered roller bearings, insert bearings and some types of
needle roller bearings standardized by IS0 do not conform with
this general plan since the dimensions given were not found 2 References
optimal for the bearings in question.
IS0 3, Preferred numbers - Series of preferred numbers.
As all bearings of the dimensions given in the general plan may
IS0 582, Rolling bearings - Metric series - Chamfer
not be in production at any particular time, it is advisable for
dimension limits.
users to approach bearing manufacturers during the early
1

---------------------- Page: 3 ----------------------
IS0 15-1981 (E)
3 Symbols
c
d = bearing bore diameter,
nominal
D = bearing outside diameter,
nominal
B = bearing width, nominal
r = inner and outer ring chamfer
dimension (see the note)
NOTE - The values for inner and outer ring chamfer dimensions given
in the plan are minimum limits, rs min.
The corresponding maximum limits are given in IS0 582.
The exact shape of the chamfer surface is not specified, but its contour
in an axial plane shall not be allowed to project beyond the imaginary
circular arc of radius rs min, tangential to the ring face and the bore or
outside cylindrical surface of the ring.
4 Boundary dimensions
Table 1 - Diameter series 7
Dimensions in millimetres
~
Dimension series
17 and 37
17 37
d D B
-
0.6 2
-
1
2,s
3
1.5 1,8
2 4 2
5
2.5 2.3
3 6 3
4 7
3
5 8 3
6 10
3,5
7 11
3,5
8 12
3,5
9 14
4,5
10 15
4,5
12 18 5
15 21
5
17 23 5
20 27 5
25 32 5
30 37 5

---------------------- Page: 4 ----------------------
Table 2 - Diameter series 8
Dimensions in millimetres

---------------------- Page: 5 ----------------------
IS0 15-1981 (E)
Table 2 (concludedl
Dimensions in millimetres
Dimension series
08 18 28 38 48 58 68 O8 18-68
I
d
B
‘s min
190 240
16 24 30 37 50 67 90 1 13
200 250
16 24 30 37 50 67
90 1 1.5
220 270 16 24
30 37 50 67 90 1 1,5
240 300
19 28 36 45 60 80
109 1 2
260 320
19 28 36 45 60 80 1 O9 1 2
280
350 22 33 42 52 69 95
125 1,l 2
300 380 25 38
48 60 80 1 O9 145 1,s 2,1
320 400
25 38 48 60 80 1 O9 145 13 2,1
340 420
25 38 48 60 80 109 145 1.5 2,1
360 440 25 38 48 60 80 1 O9 145 1,s 2,1
380 480
31 46 60 75 100 136 180 2 2,1
400 500 31 46 60 75 100 136 180 2 2,1
420
520 31 46 60 75 100 136 180 2 2.1
440 540 31 46 60 75 100 136 180 2 2.1
460
580 37 56 72 90 118 160 218 2,l 3
480 600 37 56 72 90 118 160 218 21 3
500 620 37 56 72 90 118 160 218 2,l 3
530 650 37 56 72 90 118 160 218 2,l 3
560 680 37 56 72 90 118 160 218 2,l 3
600 730 42 60 78 98 1 28 175 236 3 3
630 780 48 69 88 112 150 200 272 3 4
670 820 48 69 88 112 150 200 272 3 4
710 870 50 74 95 118 160 218 290 4 4
750 920 54 78 100 1 28 1 70 230 308 4 5
800 980 57 82 106 136 180 243 325 4 5
850 1 030 57 82 106 136 180 243 325 4 5
900 60 85 112 140 190 258 345 5 5
1090
5 5
!Eo 1150 63 90 118 150 200 272 355
loo0 1220 71 100 128 165 218 300 400 5 6
300 400 5 6
1060 1280 71 100 1 28 165 218
1360 78 106 140 180 243 325 438 5 6
1120
1180 1 420 78 106 140 180 243 325 438 5 6
80 112 145 185 250 335 450 6 6
1250 1500
1320 88 122 1 65 206 280 375 500 6 6
1600
300 400 545 6 7,5
1400 1700 95 132 175 224
- - -
1820 - 140 185 243 315 7,5
1500
- - -
- 155 200 265 345
1600 1950 7.5
- - -
- 160 206 272 355 7,5
1700 2060
- - -
2 180 - 165 218 290 375 9,5
1800
- - -
- 175 230 300 400
1900 2 300 9,5
- - -
- 190 250 325 425 9,5
2000 2430
4

---------------------- Page: 6 ----------------------
IS0 15-1981 (E)
Table 3 - Diameter series 9
5

---------------------- Page: 7 ----------------------
IS0 15-1981 (E)
Table 3 (concluded)
Dimensions in millimetres
~~
Dimension series
O9 19 29 39 49 59 69 O9 I 19-69
d D
B
190 260 22
33 42 52 69 95
1 25 2
200 280
25 38 48 60 80 109
1 45
2,1
220 300
25 38 48 60 80 1 O9
145
2,1
240
320 25 38 48 60 80 1 O9
145
2,1
260 360 31 46 60
75 100 1 36 180
2,1
280
380 31 46 60 75 100 136
1 80
2,1
300 420 37 56 72
90 118 160 218 3
320 440
37 56 72 90 118 160 218
3
340 460 37 56 90
72 118 160 218 3
360
480 37 56 72 90 118 160 218
3
380 520 44
65 82 106 140 190 250 4
400 540 44 65 82 106 140 190
250 4
420 560
44 65 82 106 140 190 250 4
440 600 50 74 95 118 160
218 290 4
460 620
50 74 95 118 160 218 290 4
480 650 54
78 100 1 28 170 230 308 5
500 670 54 78 100 128 170 230 308 5
530 710 57 82 106 136 1 80
243 325 5
560 750 60 85 112 140 190 258 345 5
600 800 63 90 118
150 200 272 355 5
630 850 71 100 128 165 218 300 400 6
670 900 73 1 03 136 170 230 308 412 6
710 950 78 106 140 180 243 325 438 6
lo00
750 80 112 145 185 250 335 450 6
800 1060 82 115 150 195 258 355 462 6
272
850 1 120 85 118 155 200 365 488 6
900 1 180 88 122 1 65 206 280 375 500 6
950 224 400
1250 95 1 32 175 300 545
7,5
lo00 1 320 1 03 140 185 236 31 5 438 580
7,5
250 335 462
1060 1400 1 O9 150 195 61 5
7r5
1 120 1
...

SLOVENSKI STANDARD
SIST ISO 15:1995
01-november-1995
Kotalni ležaji - Radialni ležaji - Glavne mere, preglednice mer
Rolling bearings -- Radial bearings -- Boundary dimensions -- General plan
Roulements -- Roulements radiaux -- Dimensions d'encombrement -- Plan général
Ta slovenski standard je istoveten z: ISO 15:1981
ICS:
21.100.20 Kotalni ležaji Rolling bearings
SIST ISO 15:1995 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

International Standard
15
INTERNATIONAL ORGANIZATION FOR STANDARDIZATlON*MEKLIYHAPOL1HAR OPrAHH3AUMR fl0 CTAHAAPTH3AUMM.ORGANlSATlON INTERNATIONALE DE NORMALISATION
Rolling bearings - Radial bearings - Boundary
0 dimensions - General plan
Roulements - Roulements radiaux - Dimensions d'encombrement - Plan gknkral
First edition - 1981-12-15
Ref. No. IS0 15-1981 (E)
UDC 621.822.84
w
-
Descriptors : bearings, rolling bearings, radial bearings, dimensions.
8
7
P
U
Price based on 16 pages
v,

---------------------- Page: 2 ----------------------

Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards institutes (IS0 member bodies). The work of developing Inter-
national Standards is carried out through IS0 technical committees. Every member
in a subject for which a technical committee has been set up has the
body interested
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council.
International Standard IS0 15 was developed by Technical Committee ISO/TC 4,
Rolling bearings, and was circulated to the member bodies in January 1981.
It has been approved by the member bodies of the following countries :
Australia Hungary Romania
Austria India South Africa, Rep. of
Italy Spain
Brazil
Canada Japan Sweden
Switzerland
China Korea, Dem. P. Rep. of
Czechoslovakia Korea, Rep. of United Kingdom
Egypt, Arab Rep. of Mexico USA
Netherlands USSR
France
Germany, F. R. Poland
No member body expressed disapproval of the document.
IS0 Recommendations R 15/ 1-1968
This International Standard cancels and replaces
and R 15/2-1970, of which it constitutes a technical revision.
0 International Organization for Standardization, 1981 O
Printed in Switzerland

---------------------- Page: 3 ----------------------

INTERNATIONAL STANDARD IS0 15-1981 (E)
Rolling bearings - Radial bearings - Boundary
dimensions - General plan
O Introduction stages of design for information regarding availability of the
bearings.
The object of the gener;. jlan is to restrict the number of radial
bearing sizes enough to ensure economic production and yet to The chamfer dimensions given in tables 1 to 8 do not necess-
arily apply to
provide a sufficient number of sizes to satisfy present and
future needs of bearing users. These needs are very com-
prehensive and varying. Therefore the plan has to embrace a a) the groove side of bearing rings with snap ring groove;
wide range of numerically determined sizes and proportions
and may even be extended by IS0 in accordance with the rules b) the non-rib side of thin cylindrical roller bearing rings;
given in the annex.
c) the non-thrust side of angular contact bearing rings;
1 Scope and field of application d) inner rings of bearings with tapered bore.
This International Standard lays down preferred boundary The general plan does not contain any recommendations per-
dimensions for radial bearings. taining to the internal design of bearings.
The tapered roller bearings, insert bearings and some types of
needle roller bearings standardized by IS0 do not conform with
this general plan since the dimensions given were not found 2 References
optimal for the bearings in question.
IS0 3, Preferred numbers - Series of preferred numbers.
As all bearings of the dimensions given in the general plan may
IS0 582, Rolling bearings - Metric series - Chamfer
not be in production at any particular time, it is advisable for
dimension limits.
users to approach bearing manufacturers during the early
1

---------------------- Page: 4 ----------------------

IS0 15-1981 (E)
3 Symbols
c
d = bearing bore diameter,
nominal
D = bearing outside diameter,
nominal
B = bearing width, nominal
r = inner and outer ring chamfer
dimension (see the note)
NOTE - The values for inner and outer ring chamfer dimensions given
in the plan are minimum limits, rs min.
The corresponding maximum limits are given in IS0 582.
The exact shape of the chamfer surface is not specified, but its contour
in an axial plane shall not be allowed to project beyond the imaginary
circular arc of radius rs min, tangential to the ring face and the bore or
outside cylindrical surface of the ring.
4 Boundary dimensions
Table 1 - Diameter series 7
Dimensions in millimetres
~
Dimension series
17 and 37
17 37
d D B
-
0.6 2
-
1
2,s
3
1.5 1,8
2 4 2
5
2.5 2.3
3 6 3
4 7
3
5 8 3
6 10
3,5
7 11
3,5
8 12
3,5
9 14
4,5
10 15
4,5
12 18 5
15 21
5
17 23 5
20 27 5
25 32 5
30 37 5

---------------------- Page: 5 ----------------------

Table 2 - Diameter series 8
Dimensions in millimetres

---------------------- Page: 6 ----------------------

IS0 15-1981 (E)
Table 2 (concludedl
Dimensions in millimetres
Dimension series
08 18 28 38 48 58 68 O8 18-68
I
d
B
‘s min
190 240
16 24 30 37 50 67 90 1 13
200 250
16 24 30 37 50 67
90 1 1.5
220 270 16 24
30 37 50 67 90 1 1,5
240 300
19 28 36 45 60 80
109 1 2
260 320
19 28 36 45 60 80 1 O9 1 2
280
350 22 33 42 52 69 95
125 1,l 2
300 380 25 38
48 60 80 1 O9 145 1,s 2,1
320 400
25 38 48 60 80 1 O9 145 13 2,1
340 420
25 38 48 60 80 109 145 1.5 2,1
360 440 25 38 48 60 80 1 O9 145 1,s 2,1
380 480
31 46 60 75 100 136 180 2 2,1
400 500 31 46 60 75 100 136 180 2 2,1
420
520 31 46 60 75 100 136 180 2 2.1
440 540 31 46 60 75 100 136 180 2 2.1
460
580 37 56 72 90 118 160 218 2,l 3
480 600 37 56 72 90 118 160 218 21 3
500 620 37 56 72 90 118 160 218 2,l 3
530 650 37 56 72 90 118 160 218 2,l 3
560 680 37 56 72 90 118 160 218 2,l 3
600 730 42 60 78 98 1 28 175 236 3 3
630 780 48 69 88 112 150 200 272 3 4
670 820 48 69 88 112 150 200 272 3 4
710 870 50 74 95 118 160 218 290 4 4
750 920 54 78 100 1 28 1 70 230 308 4 5
800 980 57 82 106 136 180 243 325 4 5
850 1 030 57 82 106 136 180 243 325 4 5
900 60 85 112 140 190 258 345 5 5
1090
5 5
!Eo 1150 63 90 118 150 200 272 355
loo0 1220 71 100 128 165 218 300 400 5 6
300 400 5 6
1060 1280 71 100 1 28 165 218
1360 78 106 140 180 243 325 438 5 6
1120
1180 1 420 78 106 140 180 243 325 438 5 6
80 112 145 185 250 335 450 6 6
1250 1500
1320 88 122 1 65 206 280 375 500 6 6
1600
300 400 545 6 7,5
1400 1700 95 132 175 224
- - -
1820 - 140 185 243 315 7,5
1500
- - -
- 155 200 265 345
1600 1950 7.5
- - -
- 160 206 272 355 7,5
1700 2060
- - -
2 180 - 165 218 290 375 9,5
1800
- - -
- 175 230 300 400
1900 2 300 9,5
- - -
- 190 250 325 425 9,5
2000 2430
4

---------------------- Page: 7 ----------------------

IS0 15-1981 (E)
Table 3 - Diameter series 9
5

---------------------- Page: 8 ----------------------

IS0 15-1981 (E)
Table 3 (concluded)
Dimensions in millimetres
~~
Dimension series
O9 19 29 39 49 59 69 O9 I 19-69
d D
B
190 260 22
33 42 52 69 95
1 25 2
200 280
25 38 48 60 80 109
1 45
2,1
220 300
25 38 48 60 80 1 O9
145
2,1
240
320 25 38 48 60 80 1 O9
145
2,1
260 360 31 46 60
75 100 1 36 180
2,1
280
380 31 46 60 75 100 136
1 80
2,1
300 420 37 56 72
90 118 160 218 3
320 440
37 56 72 90 118 160 218
3
340 460 37 56 90
72 118 160 218 3
360
480 37 56 72 90 118 160 218
3
380 520 44
65 82 106 140 190 250 4
400 540 44 65 82 106 140 190
250 4
420 560
44 65 82 106 140 190 250 4
440 600 50 74 95 118 160
218 290 4
460 620
50 74 95 118 160 218 290 4
480 650 54
78 100 1 28 170 230 308 5
500 670 54 78 100 128 170 230 308 5
530 710 57 82 106 136 1 80
243 325 5
560 750 60 85 112 140 190 258 345 5
600 800 63 90 118
150 200 272 355 5
630 850 71 100 128 165 218 300 400 6
670 900 73 1 03 136 170 230 308 412 6
710 950 78 106 140 180 243 325 438 6
lo00
750 80 112 145 185 250 335
...

Norme internationale
15
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONOMEXAYHAPO~HAR OPrAHH3AUHR Il0 CTAHAAPTH3AUHH.ORGANlSATlON INTERNATIONALE DE NORMALISATION
0 Roulements - Roulements radiaux - Dimensions
d'encombrement - Plan général
Rolling bearings - Radial bearings - Boundary dimensions - General plan
Premiere 6dition - 1981-12-15
O
RBf. no : IS0 15-1981 (FI
CDU 621.822.84
G
-
Descripteurs : palier, roulement, roulement radial, dimension.
f
Prix bas4 sur 16 pages

---------------------- Page: 1 ----------------------
Avant-propos
L'ISO (Organisation internationale de normalisation) est une federation mondiale
d'organismes nationaux de normalisation (comitbs membres de I'ISO). L'Blaboration
des Normes internationales est confiBe aux comitBs techniques de I'ISO. Chaque
comit6 membre intéresse par une Btude a le droit de faire partie du comitB technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I'ISO, participent également aux travaux.
Les projets de Normes internationales adopt& par les comitBs techniques sont soumis
aux comitBs membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I'ISO.
La Norme internationale IS0 15 a BtB Blaborbe par le cornit6 technique ISO/TC 4,
Roulements, et a BtB soumise aux comitBs membres en janvier 1981.
Les comitBs membres des pays suivants l'ont approuvke :
Afrique du Sud, RBp. d' Egypte, RBp. arabe d' Pologne
Allemagne, R. F. Espagne Roumanie
Australie France Royaume-Uni
Autriche Hongrie Suede
BrBsil Inde Suisse
Italie
Canada TchBcoslovaquie
Chine Japon URSS
CorBe, RBp. de Mexique USA
CorBe, RBp. dBm. p. de Pays- Bas
Aucun comitb membre ne l'a dBsapprouvBe.
Cette Norme internationale annule et remplace les Recommandations ISO/R 15/1-
1968 et ISO/R 15/2-1970, dont elle constitue une révision technique.
O Organisation internationale de normalisation, 1981 O
Imprime en Suisse

---------------------- Page: 2 ----------------------
NORME INTERNATIONALE IS0 15-1981 (F)
Roulements - Roulements radiaux - Dimensions
d'encombrement - Plan général
O
O Introduction Les dimensions des arrondis donnees dans les tableaux 1 B 8 ne
sont pas necessairement applicables
L'objet du plan general est de limiter la proliferation des tailles
de roulements de façon B assurer une production Bconomique,
a) au cat6 rainure des bagues de roulements B rainures
et ce tout en conservant un choix suffisant pour satisfaire les pour segment d'arr6t;
besoins presents et futurs des utilisateurs. Ces besoins sont
&tendus et varies; en cons6quence. le plan doit offrir une large
b) au cat6 sans 6paulement des bagues minces pour rou-
gamme de tailles, numeriquement determinees. II pourra en
lements B rouleaux cylindriques;
outre &re Btendu par I'ISO, en conformite avec les rbgles don-
nees dans l'annexe.
c) au cat6 oppos6 B la pouss6e des bagues de roulements
B contact oblique;
1 Objet et domaine d'application
d) aux bagues int6rieures des roulements B alesage coni-
que.
La presente Norme internationale fixe les dimensions d'encom-
brement recommand6es pour les roulements radiaux. Le plan general ne contient aucune directive concernant le des-
sin interne des roulements.
B rouleaux coniques, les
Elle ne concerne pas les roulements
roulements ((insert)) et certains types de roulements B aiguilles
normalises par I'ISO, car les dimensions ici fournies sont peu
adaptees aux roulements en question.
2 R6f6rences
Étant donne que la fabrication courante peut ne pas couvrir B
IS0 3, Nombres normaux - Sdries de nombres normaux.
tout moment la totalit6 de ce que pr6voit le plan, les utilisateurs
ont inter& B prendre contact, dbs le debut de leurs etudes, avec
IS0 582, Roulements - Sdries mdtriques - Dimensions limi-
les constructeurs de roulements, afin de se renseigner sur les
tes des arrondis.
disponibilit6s.
1

---------------------- Page: 3 ----------------------
IS0 15-1981 (FI
3 Symboles
d = diambtrenominaldeI'al6sage
du roulement
D = diamktre exterieur nominal
du roulement
B = largeur nominale du roule-
ment
r = dimension d'arrondi des
O
bagues interieure et exterieure
(voir la note)
NOTE - Les valeurs donnees dans le plan pour les dimensions
d'arrondi des bagues, interieure et ext6rieure. sont des valeurs minima-
les 's min'
Les valeurs maximales sont donnees dans I'ISO 582.
La forme exacte de la surface de l'arrondi n'est pas fixbe; cependant,
sa trace dans un plan axial doit se trouver 8 I'intbrieur d'un arc de cercle
imaginaire, de rayon rs m,n, tangent 8 la face de la bague, et 8 I'albsage
ou A la surface extbrieure cylindrique de la bague.
4 Dimensions d'encombrement
Tableau 1 - SBrie de diamhtres 7
Dimensions en millimbtres
I SBries de dimensions I
I 17 1 37 1 17et37 I
O
d D B
's min
2 03 - 0,05
0.6
1 23 1 - 0,05
13 0,05
1.5 3 1
2 4 12 2 0,05
5 1,s 23 0,08
2,s
3 6 2 3 0,m
4 7 2 3 0,08
5 8 2 3 0,08
6 10 23 3,5 o. 1
7 11 2,s 3,5 O, 1
3,5 O, 1
8 12 23
4,5 o. 1
9 14 3
10 15 3 4,5 O, 1

---------------------- Page: 4 ----------------------
IS0 15-1981 (FI
Tableau 2 - %rie de diametres 8
Dimensions en millimbtres
~
Shies de dimensions
O8 18 28 38 48 58 68 O8 I 18-68
d D
B
- -
- - -
1
0,6 26 1,4
-
- - - -
1 3 1
13
- - - -
4 -
1,5 2
12
-
- - - -
2 5
13 23
- - - -
-
2.5 6
13 2,6
- - - - -
3 7 2
3
- - - -
4 9 4
2,5 3,5
- - - -
5 11 4
3 5
- - - -
6 13 5 6
33
- - - -
7 14 5
3,5 6
- - -
8 16 4 5
6 8
- - -
9 17 4 5 6 8
- - -
10 19 5 6 7
9
- - -
12 21 5 6 7 9
- - -
5
15 24 6 7 9
-
- -
17 26 5 6 7
9
20 32 4 7 8 10 12 16 22
-
-
22 4 7 10 16 22
34
25 37 4 7 8 10 12 16 22
-
-
4 7 10 16 22
28 40
30 42 4 7 8 10 12 16 22
- -
4 7 10 16 22
32 44
35 47 4 7 8 10 12 16 22
4 7 8 12 16 22
40 52 10
45 58 4 7 8 10 13 18 23
50 65 5 7 10 12 15 20 27
55 72 7 9 11 13 17 23 30
60 78 7 10 12 14 18 24 32
65 85 7 10 13 15 20 27 36
8 10 13 15 27 36
70 90 20
75 95 8 10 13 15 20 27 36
8 10 15 20 27 36
80 100 13
85 110 9 13 16 19 25 34 45
34 45
90 115 9 13 16 19 25
9 13 16 19 25 34 45
95 120
45
100 125 9 13 16 19 25 34
9 13 16 19 25 34 45
105 130
16 23 30 40 54
110 140 10 19
10 16 19 23 30 40 54
120 150
18 22 26 35 46 63
130 165 11
46
11 18 22 26 35 63
140 175
24 30 40 54 71
150 190 13 20
54 71
200 13 20 24 30 40
160
22 27 34 45 60 80
170 21 5 14
60 80
180 14 22 27 34 45
225
3

---------------------- Page: 5 ----------------------
IS0 15-1981 (FI
Tableau 2 Ifin)
Dimensions en millimhtres
I SBries de dimensions
c@ 18 28 38 48 58 68 08 18-68
d D
B
1
190
240 16 24 30 37 50 67
90
15
200 250 16 24
30 37 50 67 90
13
220
270 16 24 30 37 50 67
90
13
240 300 19 28 36
45 60 80 1 O9 2
260
320 19 28 36 45 60 80 1 O9
2
280 350 22 33 42
52 69 95 125
2
300 380 25 38 48 60 80
1 O9 145
2.1
320 400 25 38
48 60 80 1 O9 145
2,1
340 420 25 38 48 60 80
109 145
2.1
360
440 25 38 48 60 80 1 O9 145
2,1
380 480 31 46 60
75 100 136 180
2,1
400 500 31 46 60 75 1 O0 136
180
2,1
420 520 31 46
60 75 100 136 180
2,f
O
440 540 31 46 60 75 1 O0 136
180
2,1
460 580 37 56 72
90 118 160 218 3
480 600 37 56 72 90 118 160
218 3
500
620 37 56 72 90 118 160 218 3
530 650 37 56 72 90 118 160 218
3
680 37 56 72
560 90 118 160 218 3
600 730 42 60 78 98 128 175 236 3
630 780 48 69 88 112 150 200 272 4
670 820 48 69 a8 112 150 200 272 4
710 870 50 74 95 118 160 218 290 4
750 920 54 78 1 O0 128 1 70 230
308 5
800 980 57 82 106 136 180 243 325 5
136 1 80
850 1 030 57 82 106 243 325 5
900 1 090 60 85 112 140 190 258 345 5
950 1150 63 90 118 150 200 272 355 5
1000 1220 71 1 O0 128 165 218 300 400 6
1060 1280 71 1 O0 128 1 65 218 300 400 6
1360 78 106 140 180 243 325 438
1120 6
1180 1 420 78 106 140 180 243 325 438 6
1250 1500 80 112 145 185 250 335 450 6
O
165 280 375 500 6
1320 1600 a8 122 206
1700 95 132 175 224 300 400 545
1400 7’5
- -
315
1500 1820 - 140 185 243 7,5
- -
1950 - 155 200 265 345
1600 7,5
- -
1700 2 O60 - 160 206 272 355
7,5
- -
2 180 - 165 218 290 375
1800 9,5
- -
300 400
1900 2 300 - 175 230 9,5
- -
2 430 - 190 250 325 425 9.5
2000
4

---------------------- Page: 6 ----------------------
IS0 15-1981 (FI
Tableau 3 - %rie de diamhtres 9
Dimensions en millimbtres
Shies de dimensions
O9 I 19-39 I 49-69
O9 19 29 39 49 59 69
B
d D
- - - - -
1 4 23
1,6
- -
- - -
5 2 2,6
1.5
- - - - -
2 6 3
23
- - - - -
7 3,5
2.5 23
- - - - -
3 4
3 8
- - - - -
5
4 11 4
- - -
-
4 6 10
5 13
- -
- -
7
6 15 5 10
- - -
-
5 7 10
7 17
- -
- -
9 11
8 19 6
- -
- -
6 9 11
9 20
-
16 22
10 22 6 8 10 13
-
8 10 13 16 22
12 24 6
O
-
7 10 13 18 23
15 28 83
-
10 13 18 23
17 30 7 83
7 9 11 13 17 23 30
20 37
17 23 30
22 39 7 9 11 13
7 9 11 13 17 23 30
25 42
13 17 23 30
28 45 7 9 11
7 9 11 13 17 23 30
30 47
15 20 27 36
52 7 10 13
32
27 36
7 10 13 15 20
35 55
16 22 30 40
40 62 8 12 14
40
12 14 16 22 30
45 68 8
16 22 30 40
72 8 12 14
50
16 19 25 34 45
55 80 9 13
25 34 45
9 13 16 19
60 85
16 19 25 34 45
65 90 9 13
10 16 19 23 30 40 54
70 100
23 30 40 54
105 10 16 19
75
16 19 23 30 40 54
80 110 10
26 35 46 63
120 11 18 22
85
11 18 22 26 35 46 63
90 125
O
35 46 63
130 11 18 22 26
95
54 71
13 20 24 30 40
100 140
30 40 54 71
145 13 20 24
105
54 71
20 24 30 40
110 150 13
34 45 60 80
165 14 22 27
120
67 90
24 30 37 50
130 1 80 16
37 50 67 90
16 24 30
140 190
60 80 1 O9
19 28 36 45
150 210
45 60 80 1 O9
220 19 28 36
160
80 1 O9
36 45 60
230 19 28
170
52 69 95 125
22 33 42
180 250
5

---------------------- Page: 7 ----------------------
IS0 15-1981 (FI
Tableau 3 (fin)
Dimensions en millimbtre
Shies de dimensions
O9 19 29 39 49 59 69 O9 19-69
B
“8 min
190 260 22 33 42 52 69
95 125 It1 2
200 280 25 38
48 60 80 1 O9 145
13 2,1
220 300 25 38 48
60 80 1 O9 145
1,s 2,1
240 320 25 38
48 60 80 1 O9 1 45
1.5 2.1
260 360 31 46 60 75
1 O0 136 180
2 2,1
280 380 31 46 60 75 1 O0 136
1 80
2 21
300 420 37 56 72 90
118 160 218 2,l 3
320 440 37
56 72 90 118 160 218
2.1 3
340 460 37 56 72 90 160
118 218 2,l 3
360 480 37 56 72 90 118 160 218
2,l 3
380 520 44 65 82
106 140 190 250 3 4
400 540 44 65 82 106 140 190 250 3 4
420 560 44 65
82 106 140 190 250 3 4
440 600 50 74 95 118 160 218 290
4 4
460 620 50 74 95
118 160 218 290 4 4
480 650 54 78 100 1 28 170 230
308 4 5
500 670 78
54 1 O0 1 28 170 230 308 4 5
530 710 57 82 106 1 36 180 325
243 4 5
560 750 60 85 112 140 190 258 345 5 5
600 800 63 90 118 150 200 272 355 5 5
630 850 71 100 128 165 218 300 400 5 6
670 900 73 103 136 170
230 308 412 5 6
710 950 78 106 140 180 243 325 438 5 6
750 loo0 80 112 145 185 250 450
335 6 6
800 1060 82 115 150 195 258 355 462 6 6
850 1 120 272
85 118 155 200 365 488 6 6
900 1180 88 122 165 206 280 375 500 6 6
950 1250 95
1 32 175 224 300 400 545
6 7,5
IO00 1 320 103 140 185 236 315 438
580 6 7,5
1060 1400 1 O9 150 195 250 335 462 615
7.5 7,5
1120 1460 1 O9 150 195 250 335 462
61 5 7,5 7.5
1180 1540 115 160 206 272 355 488 650
7,5 7,5
1250 1630 122 170 218 280 375 515 690
7,5 7,5
1320 1 720 1 28 230 300 400 710
175 545
7,5 7,5
- -
1400 1820 185 243 31 5 425
9,5
-
-
195 258 335 450
1500 1950 9,5
- -
1600 2 060 200 265 345 462
9,5
-
-
280 475
1700 2 180 212 355 9,5
-
1800 2300 218 290 375 500 - 12
-
230 308 400 530 - 12
1900 2 430
6

---------------------- Page: 8 ----------------------
I
IS0 15-1981 (FI
Tableau 4 - Sbrie de diametres O
Dimensions en millim&res
~
SBries de dimensions
00 10 20 30 40 50 60
00 I 10-60
d D
B
- -
- - -
6 3
1.5 23
- - - - -
2 7
2.8
3,5
- -
- - -
8 4
2.5 2,8
- - - - -
...