Abstract

Additional generic procedures to those in basic call for use in supplementary services.

Status
Published
Publication Date
30-Nov-2003
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2003
Due Date
01-Dec-2003
Completion Date
01-Dec-2003

Buy Documents

Standard

SIST EN 300 356-2 V3.2.2:2003

English language (10 pages)
Preview
Preview
e-Library read for
×1 day

SIST EN 300 356-2 V3.2.2:2003 is the Slovenian adoption of ETSI EN 300 356-2 V3.2.2. It specifies additional generic procedures for ISDN supplementary services over the ISDN User Part (ISUP) version 3 of Signalling System No.7 (SS7) for the international interface, based on ITU-T Recommendation Q.730 (1997) with agreed modifications.

What does SIST EN 300 356-2 V3.2.2:2003 specify?

SIST EN 300 356-2 V3.2.2:2003 defines procedures common to multiple ISDN supplementary services on the international ISUP interface. In practice, it gives the shared signalling framework that network operators and switch vendors use when different supplementary services need the same basic call-control handling.

The Scope says the document applies to pan-European ISDN provided by European public telecommunications operators through SS7 for ISUP. It keeps the functions, message formats, codes and exchange actions needed for the international interface, while leaving national-interface specifics and non-ISDN network requirements outside the document.

The document is organised around a common service specification structure and includes two informative annexes plus an informative appendix.

PartWhat it covers
Annex ASignalling flows
Annex BInterworking aspects
Appendix IIA network option, with the status of an informative annex

What are the key requirements of SIST EN 300 356-2 V3.2.2:2003?

The standard’s main requirement is to provide the shared procedure layer for multiple supplementary services carried over ISUP version 3. That matters because implementers need one common behaviour for setup, signalling and exchange actions before they add service-specific details from the companion parts.

  • The Scope limits the document to the international ISDN interface. It does not add protocol requirements for users reached through non-ISDN networks, so integrators must handle those cases separately.
  • The Scope also says that national-signalling-interface requirements are outside the document. For practice, this means the standard is aimed at interconnection between networks, not at defining every national implementation detail.
  • Functions, formats, codes and actions at originating and destination local exchanges are retained. That is important because international interworking still depends on consistent exchange behaviour at both ends of the call.
  • Items marked for national use are included for information in the international specification. If a national network supports them, they are intended to be supported in that way, which helps avoid mismatches at gateways.
  • Items marked “Not Required” do not have to be supported. This gives implementers a clear boundary between mandatory shared behaviour and optional items.
  • If a national signalling system behaves differently, the international gateway exchange is expected to support both the national and the international network. In practice, gateway design must account for translation and dual behaviour.
  • The standard relies on the companion parts of EN 300 356 for the service-specific procedures. Part 1 covers basic services, while the later parts cover individual supplementary services such as CLIP, CLIR, COLP, COLR, TP, UUS, CUG, SUB, MCID, CONF, ECT, diversion services, HOLD, CW, CCBS, 3PTY and CCNR.
  • The added document structure includes operational requirements, coding requirements, state definitions, signalling procedures, timer values and dynamic description. That tells readers where to find the procedures, message handling and timing information needed for implementation and test preparation.

What terms does SIST EN 300 356-2 V3.2.2:2003 define?

  • Integrated Services Digital Network (ISDN) - A digital network that carries multiple telecommunications services on a common access and signalling framework.
  • Signalling System No.7 (SS7) - The signalling system used to set up, control and clear calls and services between exchanges.
  • ISDN User Part (ISUP) - The SS7 part that carries call-control signalling for ISDN connections.
  • Supplementary service - An added service that works alongside basic call handling, such as number identification, diversion or call waiting.
  • Calling Line Identification Presentation (CLIP) - A supplementary service that presents the calling line identity to the called user.
  • Explicit Call Transfer (ECT) - A supplementary service that allows a call to be transferred explicitly.
  • Protocol Implementation Conformance Statement (PICS) - A conformance document used to declare which functions an implementation supports.

Who uses SIST EN 300 356-2 V3.2.2:2003?

Telecom network operators use this standard when they configure international ISDN interworking and gateway exchanges. Switch manufacturers and protocol implementers use it when they build ISUP support for supplementary services. Test laboratories and quality teams use it to prepare conformance, interoperability and service-interworking checks.

It is also relevant to buyers and project managers who need to confirm that an ISDN signalling platform supports the shared supplementary-service procedures expected on international interfaces.

What changed in SIST EN 300 356-2 V3.2.2:2003 from the previous edition?

This edition is the EN 300 356-2 version aligned with ITU-T Recommendation Q.730 (1997) and published with agreed ETSI modifications. The stated changes include replacement of the Scope and References clauses, updated references to the modified companion EN 300 356 parts, deletion of selected sentences in subclauses 1.3.2 and 1.3.5, addition of a “Not required” subclause title, and insertion of a standard document structure for supplementary-service parts.

Which standards are used with SIST EN 300 356-2 V3.2.2:2003?

ReferenceWhat it contributes
CCITT Recommendation I.130Method for characterizing telecommunication services supported by ISDN and network capabilities
ETS 300 121ISUP version 1 for international ISDN interconnections
EN 300 356-1Basic services for ISUP version 3
EN 300 356-3 to EN 300 356-20Service-specific companion parts for the supplementary services listed in the foreword
EN 300 356-31 to EN 300 356-36Conformance and test specifications for basic and supplementary services

What does the SIST EN 300 356-2 V3.2.2:2003 document contain?

The document contains the common signalling procedures for supplementary services, including activation, deactivation and registration, plus actions at originating, transit, gateway and destination exchanges. It also covers interactions with other networks and with other supplementary services, together with timer values and dynamic description.

Annex A provides signalling flows, and Annex B provides interworking aspects. Appendix II is presented as an informative annex for a network option.

Buy Documents

Standard

SIST EN 300 356-2 V3.2.2:2003

English language (10 pages)
Preview
Preview
e-Library read for
×1 day

Get Certified

Connect with accredited certification bodies for this standard

ANCE

Mexican certification and testing association.

EMA Mexico Verified

Intertek Slovenia

Intertek testing, inspection, and certification services in Slovenia.

UKAS Slovenia Verified

LNE (Laboratoire National de Métrologie et d'Essais)

French national laboratory for metrology and testing.

COFRAC France Verified

Sponsored listings

Frequently Asked Questions

SIST EN 300 356-2 V3.2.2:2003 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 for the international interface; Part 2: ISDN supplementary services [ITU-T Recommendation Q.730 (1997), modified]". This standard covers: Additional generic procedures to those in basic call for use in supplementary services.

Additional generic procedures to those in basic call for use in supplementary services.

SIST EN 300 356-2 V3.2.2:2003 is classified under the following ICS (International Classification for Standards) categories: 33.080 - Integrated Services Digital Network (ISDN). The ICS classification helps identify the subject area and facilitates finding related standards.

SIST EN 300 356-2 V3.2.2:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 for the international interface; Part 2: ISDN supplementary services [ITU-T Recommendation Q.730 (1997), modified]33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:EN 300 356-2 Version 3.2.2SIST EN 300 356-2 V3.2.2:2003en01-december-2003SIST EN 300 356-2 V3.2.2:2003SLOVENSKI
STANDARD
EN 300 356-2 V3.2.2 (1998-08)European Standard (Telecommunications series)Integrated Services Digital Network (ISDN);Signalling System No.7;ISDN User Part (ISUP) version 3 for the international interface;Part 2: ISDN supplementary services[ITU-T Recommendation Q.730 (1997), modified]SIST EN 300 356-2 V3.2.2:2003

ETSIEN 300 356-2 V3.2.2 (1998-08)2ReferenceREN/SPS-01039-2 (3aoi1ipc.PDF)KeywordsISDN, ISUP, SS7, supplementary serviceETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/88Internetsecretariat@etsi.frhttp://www.etsi.frhttp://www.etsi.orgCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1998.All rights reserved.SIST EN 300 356-2 V3.2.2:2003

ETSIEN 300 356-2 V3.2.2 (1998-08)3Intellectual Property RightsIPRs essential or potentially essential to the present document may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foundin SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respectof ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on theETSI Web server (http://www.etsi.fr/ipr or http://www.etsi.org/ipr).Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guaranteecan be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)which are, or may be, or may become, essential to the present document.ForewordThis European Standard (Telecommunications series) has been produced by ETSI Technical Committee SignallingProtocols and Switching (SPS).The present document is part 2 of a multi-part EN covering the ISDN User Part (ISUP) version 3 for the internationalinterface, as identified below:Part 1:"Basic services";Part 2:"ISDN supplementary services";Part 3:"Calling Line Identification Presentation (CLIP) supplementary service";Part 4:"Calling Line Identification Restriction (CLIR) supplementary service";Part 5:"Connected Line Identification Presentation (COLP) supplementary service";Part 6:"Connected Line Identification Restriction (COLR) supplementary service";Part 7:"Terminal Portability (TP) supplementary service";Part 8:"User-to-User Signalling (UUS) supplementary service";Part 9:"Closed User Group (CUG) supplementary service";Part 10:"Subaddressing (SUB) supplementary service";Part 11:"Malicious Call Identification (MCID) supplementary service";Part 12:"Conference Call, add-on (CONF) supplementary service";Part 14:"Explicit Call Transfer (ECT) supplementary service";Part 15:"Diversion supplementary services";Part 16:"Call Hold (HOLD) supplementary service";Part 17:"Call Waiting (CW) supplementary service";Part 18:"Completion of Calls to Busy Subscriber (CCBS) supplementary service";Part 19:"Three party (3PTY) supplementary service".Part 20:"Completion of Calls on No Reply (CCNR) supplementary service";Part 31:"Protocol Implementation Conformance Statement (PICS) proforma specification for basic services"Part 32:"Test Suite Structure and Test Purposes (TSS&TP) specification for basic services"Part 33:"Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for basic services"Part 34:"Protocol Implementation Conformance Statement (PICS) proforma specification for supplementaryservices"Part 35:"Test Suite Structure and Test Purposes (TSS&TP) specification for supplementary services"Part 36:"Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for supplementary services"NOTE:Part 13 has not been issued.SIST EN 300 356-2 V3.2.2:2003

ETSIEN 300 356-2 V3.2.2 (1998-08)4National transposition datesDate of adoption of this EN:31 August 1998Date of latest announcement of this EN (doa):30 November 1998Date of latest publication of new National Standardor endorsement of this EN (dop/e):31 May 1999Date of withdrawal of any conflicting National Standard (dow):31 May 1999Endorsement noticeThe text of ITU-T Recommendation Q.730 (1997) was approved by ETSI as an EN with agreed modifications as givenbelow.NOTE:New or modified text is indicated using sidebars. In addition, underlining and/or strike-out are used tohighlight detailed modifications where necessary.SIST EN 300 356-2 V3.2.2:2003

ETSIEN 300 356-2 V3.2.2 (1998-08)5Global modifications to ITU-T Recommendation Q.730Replace the two clauses "Scope" and "References" with the following two clauses (Scope and Normative references):ScopeThis second part of EN 300 356 specifies procedures that are common to multiple supplementary services defined forthe pan-European Integrated Services Digital Network (ISDN) as provided by the European public telecommunicationsoperators by means of the Signalling System No.7 protocol for the ISDN User Part (ISUP). The present documentidentifies the protocol procedures and switching functions needed to support telecommunication services (seeCCITT Recommendation I.130 [1]).The present document does not specify the additional protocol requirements where the service is provided to the user viaa telecommunications network that is not an ISDN.The present document does not specify the additional protocol requirements for the national signalling interface.Although the present document applies only to the international interconnection, the specification of functions, formatsand codes of messages and signals, and actions performed at originating and destination local exchanges are retained.Formats, codes and procedures marked for national use are included for informative purposes for the internationalinterface specification. If these items so marked are supported within a national network and operator's network, then itis proposed that they shall be supported in this manner.Items in the present document marked "Not Required" are not required to be supported.NOTE:In the case where a national signalling system behaves differently, the international gateway exchange isto support both the concerned national and international network.ReferencesThe following documents contain provisions which, through reference in this text, constitute provisions of the presentdocument.· References are either specific (identified by date of publication, edition number, version number, etc.) ornon-specific.· For a specific reference, subsequent revisions do not apply.· For a non-specific reference, subsequent revisions do apply.· A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the samenumber.[1]CCITT Recommendation I.130 (1988): "Method for the characterization of telecommunicationservices supported by an ISDN and network capabilities of an ISDN".[2]ETS 300 121 (1992): "Integrated Services Digital Network (ISDN); Application of the ISDN UserPart (ISUP) of CCITT Signalling System No.7 for international ISDN interconnections (ISUPversion 1)".[3]EN 300 356-1: "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN UserPart (ISUP) version 3 for the international interface; Part 1: Basic services[ITU-T Recommendations Q.761 to Q.764 (1997), modified]".SIST EN 300 356-2 V3.2.2:2003

ETSIEN 300 356-2 V3.2.2 (1998-08)6[4]EN 300 356-3: "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN UserPart (ISUP) version 3 for the international interface; Part 3: Calling Line IdentificationPresentation (CLIP) supplementary service [ITU-T Recommendation Q.731, clause 3 (1993),modified]".[5]EN 300 356-4: "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN UserPart (ISUP) version 3 for the international interface; Part 4: Calling Line Identification Restriction(CLIR) supplementary service [ITU-T Recommendation Q.731, clause 4 (1993), modified]".[6]EN 300 356-5: "Integrated Services Digital Network (ISDN); Signa
...