SIST ETS 300 085 E1:2003

Integrated Services Digital Network (ISDN); 3,1 kHz telephony teleservice; Attachment requirements for handset terminals (Candidate NET 33)

T/TE 10-06 [Q]

Digitalno omrežje z integriranimi storitvami (ISDN) – Daljinska storitev telefonije na 3,1 kHz – Priključitvene zahteve za terminale v pogovorki

General Information

• Status: Published
• Publication Date: 30-Nov-2003
• ICS: 33.080 - Integrated Services Digital Network (ISDN)
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2003
• Due Date: 01-Dec-2003
• Completion Date: 01-Dec-2003
• Ref Project: ETSI ETS 300 085 ed.1 (1990-12) - Integrated Services Digital Network (ISDN); 3,1 kHz telephony teleservice; Attachment requirements for handset terminals (Candidate NET 33)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ETS 300 085 E1:2003
01-december-2003
'LJLWDOQRRPUHåMH]LQWHJULUDQLPLVWRULWYDPL,6'1±'DOMLQVNDVWRULWHYWHOHIRQLMHQD
N+]±3ULNOMXþLWYHQH]DKWHYH]DWHUPLQDOHYSRJRYRUNL
Integrated Services Digital Network (ISDN); 3,1 kHz telephony teleservice; Attachment
requirements for handset terminals (Candidate NET 33)
Ta slovenski standard je istoveten z: ETS 300 085 Edition 1
ICS:
33.080 Digitalno omrežje z Integrated Services Digital
integriranimi storitvami Network (ISDN)
(ISDN)
SIST ETS 300 085 E1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ETS 300 085 E1:2003

---------------------- Page: 2 ----------------------

SIST ETS 300 085 E1:2003
EUROPEAN ETS 300 085
TELECOMMUNICATION December 1990
STANDARD
Source: ETSI TC-TE Reference: T/TE 10-06
ICS: 33.080
Candidate NET 33, ISDN, 3,1 kHz telephony terminals
Key words:
Integrated Services Digital Network (ISDN);
3,1 kHz telephony teleservice
Attachment requirements for handset terminals
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
F-06921 Sophia Antipolis CEDEX - FRANCE
Postal address:
650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
Office address:
c=fr, a=atlas, p=etsi, s=secretariat - [e-mail]
X.400: Internet:
Tel.: [phone] - Fax: [phone]
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1990. All rights reserved.
New presentation - see History box

---------------------- Page: 3 ----------------------

SIST ETS 300 085 E1:2003
Page 2
ETS 300 085: December 1990
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST ETS 300 085 E1:2003
Page 3
ETS 300 085: December 1990
Contents
Foreword.9
1 Scope .11
2 Normative references .11
3 Definitions and abbreviations.13
3.1 Definitions.13
3.2 Abbreviations.13
4 Access channel selection .14
5 Call control functions.14
5.1 Outgoing calls.14
5.1.1 Overlap and en-bloc sending .14
5.1.2 Coding of Bearer Capability (BC) information element.14
5.1.3 Coding of High Layer Compatibility (HLC) information element .15
5.1.4 Coding of Low Layer Compatibility (LLC) information element.15
5.2 Incoming calls.16
5.2.1 Compatibility checking .16
5.2.1.1 Coding of Bearer Capability (BC) information element .17
5.2.1.2 Coding of High Layer Compatibility (HLC) information
element.17
5.2.1.3 Coding of Low Layer Compatibility (LLC) information
element.17
5.2.1.4 Terminal selection.17
5.2.1.4.1 Operation of the designated terminal
under restricted power conditions.18
5.2.2 Incoming call indication .18
5.2.2.1 Terminal is not engaged in a telephone call.18
5.2.2.2 Terminal is busy .18
5.3 Information tones .18
5.4 Multi Frequency Push Button (MFPB) signalling .19
6 Transmission aspects .19
6.1 General.19
6.1.1 Encoding .19
6.1.2 Relative level.19
6.1.3 Volume control.19
6.2 Speech performance characteristics (Handset 3,1 kHz telephony). 19
6.2.1 Sensitivity - frequency response .19
6.2.1.1 Sending .19
6.2.1.2 Receiving .20
6.2.2 Sending and receiving loudness ratings (SLR and RLR).20
6.2.2.1 Nominal values .20
6.2.2.2 Volume control .20
6.2.3 Sidetone.21
6.2.3.1 Talker sidetone.21
6.2.3.2 Listener sidetone.21
6.2.4 Terminal coupling loss (TCL).21
6.2.4.1 Weighted Terminal Coupling Loss (TCLw) .21
6.2.4.2 Stability loss.21
6.2.5 Distortion.21
6.2.5.1 Sending .21

---------------------- Page: 5 ----------------------

SIST ETS 300 085 E1:2003
Page 4
ETS 300 085: December 1990
6.2.5.1.1 Method 1 5 (Pseudo random noise
stimulus) .21
6.2.5.1.2 Method 2 (Sinusoidal test signal) .22
6.2.5.2 Receiving .22
6.2.5.2.1 Method 1 .22
6.2.5.2.2 Method 2 .23
6.2.5.3 Sidetone .23
6.2.6 Variation of gain with input level.23
6.2.6.1 Sending.23
6.2.6.2 Receiving .24
6.2.7 Out-of-band signals .24
6.2.7.1 Discrimination against out-of-band input signals (sending) .24
6.2.7.2 Spurious out-of-band (receiving).24
6.2.8 Noise.25
6.2.8.1 Sending.25
6.2.8.2 Receiving .25
6.2.8.3 Level of sampling frequency (receiving) .25
6.2.9 Acoustic shock.25
6.2.9.1 Continuous signal.25
6.2.9.2 Peak signal .25
6.2.10 Delay.25
6.3 Loudspeaking and handsfree telephony.25
6.4 Non-linear devices.26
7 Power feeding.26
7.1 General conditions.26
7.2 Operation under restricted power conditions.26
7.2.1 Leakage current.26
7.2.2 Designated terminal functions.26
7.3 Method of designation .26
7.4 Visibility of designation.26
8 Physical modules.26
8.1 Handset.26
8.2 Audible alerting module.27
8.2.1 Sound pressure level .27
8.2.2 Alerting module control.27
8.2.2.1 Starting.27
8.2.2.2 Stopping .27
8.2.3 Adjustment of loudness .28
8.2.4 Adjustment of sound characteristics .28
9 Testing and approval methodology.28
Annex A (normative): Test specifications .29
A.1 General conditions for testing.29
A.1.1 Environment for tests.29
A.1.2 Power supply limitations.29
A.1.3 Test equipment interface.29
A.1.4 Test equipment requirements .29
A.1.4.1 Electro-acoustic equipment .29
A.1.4.2 Test equipment for digital telephone sets.29
A.1.4.2.1 Codec approach and specification.29
A.1.4.2.2 Direct digital processing approach.30
A.1.5 Alternative test methods .30
A.1.6 Accuracy of test measurements .31
A.1.7 Bandwidth.31
A.2 Transmission requirements testing.31

---------------------- Page: 6 ----------------------

SIST ETS 300 085 E1:2003
Page 5
ETS 300 085: December 1990
A.2.1 Sensitivity/frequency response .31
A.2.1.1 Sending. 31
A.2.1.2 Receiving.31
A.2.2 Loudness ratings.32
A.2.2.1 Sending Loudness Rating (SLR).32
A.2.2.2 Receiving Loudness Rating (RLR).32
A.2.3 Sidetone.32
A.2.3.1 Talker sidetone .32
A.2.3.2 Listener sidetone.33
A.2.4 Terminal coupling loss .33
A.2.4.1 Weighted terminal coupling loss.33
A.2.4.2 Stability Loss . 33
A.2.5 Distortion. 34
A.2.5.1 Sending. 34
A.2.5.1.1 Method 1 . 34
A.2.5.1.2 Method 2 . 35
A.2.5.2 Receiving. 35
A.2.5.2.1 Method 1 . 35
A.2.5.2.2 Method 2 . 35
A.2.5.3 Sidetone. 35
A.2.6 Variation of gain with input level.35
A.2.6.1 Sending. 35
A.2.6.2 Receiving.36
A.2.7 Out-of-band signals.36
A.2.7.1 Discrimination against out-of-band input signal.36
A.2.7.2 Spurious out-of-band signals .36
A.2.8 Noise .36
A.2.8.1 Sending. 36
A.2.8.2 Receiving.36
A.2.8.3 Level of sampling frequency (receiving).37
A.2.9 Acoustic shock.37
A.2.9.1 Continuous signal .37
A.2.10 Delay .37
A.3 Audible alerting module.38
A.3.1 Sound pressure level measurement .38
A.3.1.1 Measurement conditions .38
A.3.1.2 Measurement method.38
A.3.2 Alerting module control .39
A.3.2.1 Starting . 39
A.3.2.2 Stopping.39
Annex A Appendix A (informative): Test Report Format.40
A.A.1 Identification .40
A.A.1.1 Identification of the Document .40
A.A.1.2 Identification of the testing laboratory . 40
A.A.1.3 Identification of the client . 40
A.A.1.4 Identification of the test item .40
A.A.1.5 Use of subcontractors . 41
A.A.2 Test conditions. 41
A.A.3 Test equipment .41
A.A.4 Test results.41
A.A.4.1 Call control functions . 41
A.A.4.2 Speech transmission characteristics . 41
A.A.4.3 Loudspeaking or handsfree telephony.41
A.A.4.4 Power feeding . 42

---------------------- Page: 7 ----------------------

SIST ETS 300 085 E1:2003
Page 6
ETS 300 085: December 1990
A.A.4.5 Physical modules.42
A.A.4.6 Acoustic shock.42
A.A.5 Summary and conclusion.42
Annex B (informative): Availability of tone generation option.43
Annex B Appendix A: Belgian requirements for tones locally generated by digital telephone.44
B.A.1 Introduction.44
B.A.2 Characteristics of the tones.44
B.A.2.1 Dial tone.44
B.A.2.2 Ringing tone.44
B.A.2.3 Busy tone .44
B.A.2.4 Congestion tone.44
Annex B Appendix B: Finnish requirements for tones locally generated by a digital telephone.45
Annex B Appendix C: French requirements for tones generated by an ISDN digital telephone .46
B.C.1 Introduction.46
B.C.2 Dial tone.46
B.C.2.1 En-bloc sending.46
B.C.2.2. Overlap sending .46
B.C.3 Call routing tone .46
B.C.4 Ring-back tone.47
B.C.5 Busy tone / congestion tone / hang-up tone .47
B.C.6 Characteristics of the tones.47
B.C.7 Additional option.47
Annex B Appendix D: German requirements for tones locally generated by a digital telephone.48
B.D.1 General requirements .48
B.D.2 Dial tone.48
B.D.3 Special dial tone.49
B.D.4 Ringing tone.49
B.D.5 Busy tone .49
B.D.6 Congestion tone (path engaged indication) .49
Annex B Appendix E: Greek requirements for tones locally generated by a digital telephone.50
Annex B Appendix F: Italian requirements for tones generated by an ISDN digital telephone.51
B.F.1 Introduction.51
B.F.2 Characteristics of the tones.51
B.F.2.1 Connection not admitted indication.51
B.F.2.2 Number engaged indication (Busy tone) .51

---------------------- Page: 8 ----------------------

SIST ETS 300 085 E1:2003
Page 7
ETS 300 085: December 1990
B.F.2.3 Proceed indication (Dial tone).51
B.F.2.4 Awaiting answer indication (Ring back tone).51
B.F.2.5 Call waiting tone. 51
Annex B Appendix G: Portuguese requirements for tones locally generated by a digital telephone .52
Annex B Appendix H: Spanish requirements for tones generated by an ISDN telephony terminal in
response to the receipt of messages on the D-channel .53
B.H.1 Introduction.53
B.H.2 Characteristics of the tones.53
B.H.2.1 Dial tone. 53
B.H.2.2 Ringing tone.53
B.H.2.3 Busy tone. 53
B.H.2.4 Congestion tone. 53
B.H.2.5 Connexion not admitted indication (number unobtainable tone).53
B.H.2.6 Call waiting tone. 53
Annex B Appendix J: Swedish requirements for tones locally generated by a digital telephone .54
Annex B Appendix K: Swiss requirements for tones locally generated by a digital telephone.55
B.K.1 Introduction.55
B.K.2 Characteristics of the tones.55
B.K.3 Additional requirements.55
Annex B Appendix L: United Kingdom (UK) requirements for tones generated by an ISDN digital
telephony terminal in response to the receipt of messages on the D-channel . 56
B.L.1 Introduction.56
B.L.2 Call set-up tones. 56
B.L.2.1 Proceed indication (Dial tone).56
B.L.2.1.1 En-bloc sending.56
B.L.2.1.2 Overlap sending .56
B.L.2.2 Awaiting answer indication.57
B.L.3 Tones for unsuccessful calls.57
B.L.4 Characteristics of the tones.58
B.L.4.1 Connexion not admitted indication (Number unobtainable tone).58
B.L.4.2 Number engaged indication (Busy tone) .58
B.L.4.3 Path engaged indication (Congestion tone).58
B.L.4.4 Proceed indication (Dial tone).58
B.L.4.5 Awaiting answer indication (Ringing tone).58
History.59

---------------------- Page: 9 ----------------------

SIST ETS 300 085 E1:2003
Page 8
ETS 300 085: December 1990
Blank page

---------------------- Page: 10 ----------------------

SIST ETS 300 085 E1:2003
Page 9
ETS 300 085: December 1990
Foreword
This European Telecommunication Standard (ETS) was produced by the Terminal Equipment (TE)
Technical Committee of the European Telecommunications Standards Institute (ETSI) and was adopted in
November 1990.
Annex A to this ETS is normative but Annex A, Appendix A and Annex B are informative.

---------------------- Page: 11 ----------------------

SIST ETS 300 085 E1:2003
Page 10
ETS 300 085: December 1990
Blank page

---------------------- Page: 12 ----------------------

SIST ETS 300 085 E1:2003
Page 11
ETS 300 085: December 1990
1 Scope
This standard specifies the technical characteristics (electrical, logical and acoustic) for terminal equipment
for the 3,1 kHz telephony teleservice which can be connected to an ISDN basic access.
The requirements of this standard are additional to those of the standards for connection to the ISDN basic
access, and of any other standards to which the terminal equipment is subject.
This standard is applicable to simple telephony terminals as well as to the telephony
...