SIST EN 301 025-2 V1.5.1:2013
(Main)Electromagnetic compatibility and Radio spectrum Matters (ERM) - VHF radiotelephone equipment for general communications and associated equipment for Class D Digital Selective Calling (DSC) - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM) - VHF radiotelephone equipment for general communications and associated equipment for Class D Digital Selective Calling (DSC) - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
The present document covers the minimum requirements for general communication for shipborne fixed installations using a VHF radiotelephone operating in certain frequency bands allocated to the maritime mobile service using either 25 kHz or 25 kHz and 12,5 kHz channels with associated equipment for DSC - class D. The present document is intended to cover the provisions of Directive 1999/5/EC [i.1] (R&TTE Directive) article 3.2, which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [i.1] may apply to equipment within the scope of the present document.
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Radiotelefonska oprema za območje VHF za splošne komunikacije in pripadajoča oprema za digitalni selektivni klic (DSC) razreda D - 2. del: Harmonizirani EN, ki zajema bistvene zahteve člena 3.2 direktive R&TTE
Ta dokument zajema minimalne zahteve za splošno komunikacijo z ladijskimi, stalno nameščenimi napravami z radiotelefonom VHF, ki deluje v določenih frekvenčnih pasovih, dodeljenih pomorskim mobilnim storitvam, ki uporabljajo kanale 25 kHz ali 25 kHz in 12,5 kHz z ustrezno opremo za digitalni selektivni klic (DSC) razreda D. Ta dokument zajema določbe člena 3.2 Direktive 1999/5/ES [i.1] (direktive R&TTE), ki navaja, da »mora biti radijska oprema skonstruirana tako, da učinkovito uporablja spekter, razporejen za prizemne/vesoljske radijske komunikacije in orbitalne vire, tako da ne pride do škodljivega motenja«. Poleg tega dokumenta se za opremo s področja uporabe tega dokumenta uporabljajo tudi drugi standardi EN, ki določajo tehnične zahteve v zvezi z bistvenimi zahtevami iz drugih delov člena 3 direktive R&TTE [i.1].
General Information
Standards Content (Sample)
Draft ETSI EN 301 025-2 V1.5.0 (2013-05)
Harmonized European Standard
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
VHF radiotelephone equipment for general communications
and associated equipment for Class "D"
Digital Selective Calling (DSC);
Part 2: Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive
2 Draft ETSI EN 301 025-2 V1.5.0 (2013-05)
Reference
REN/ERM-TG26-101-2
Keywords
DSC, maritime, radio, traffic, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2013.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 Draft ETSI EN 301 025-2 V1.5.0 (2013-05)
Contents
Intellectual Property Rights . 6
Foreword . 6
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions and abbreviations . 8
3.1 Definitions . 8
3.2 Abbreviations . 8
4 Technical requirements specifications . 8
4.1 Environmental profile . 8
4.2 Conformance requirements . 9
4.2.1 Transmitter frequency error . 9
4.2.1.1 Definition . 9
4.2.1.2 Limits . 9
4.2.1.3 Conformance . 9
4.2.2 Transmitter adjacent channel power . 9
4.2.2.1 Definition . 9
4.2.2.2 Limits . 9
4.2.2.3 Conformance . 9
4.2.3 Transmitter conducted spurious emissions conveyed to the antenna . 9
4.2.3.1 Definition . 9
4.2.3.2 Limit . 9
4.2.3.3 Conformance . 9
4.2.4 Transmitter cabinet radiation and conducted spurious emissions other than those conveyed to the
antenna . 9
4.2.4.1 Definitions . 9
4.2.4.2 Limits . 10
4.2.4.3 Conformance . 10
4.2.5 Transient frequency behaviour of the transmitter . 10
4.2.5.1 Definitions . 10
4.2.5.2 Limits . 10
4.2.5.3 Conformance . 10
4.2.6 Transmitter carrier power . 10
4.2.6.1 Definition . 10
4.2.6.2 Limit . 10
4.2.6.3 Conformance . 10
4.2.7 Transmitter frequency deviation . 10
4.2.7.1 Definition . 10
4.2.7.2 Limit . 10
4.2.7.3 Conformance . 10
4.2.8 DSC frequency error (demodulated DSC signal). 10
4.2.8.1 Definition . 10
4.2.8.2 Limit . 11
4.2.8.3 Conformance . 11
4.2.9 DSC modulation index. 11
4.2.9.1 Definition . 11
4.2.9.2 Limit . 11
4.2.9.3 Conformance . 11
4.2.10 DSC modulation rate . 11
4.2.10.1 Definition . 11
4.2.10.2 Limit . 11
ETSI
4 Draft ETSI EN 301 025-2 V1.5.0 (2013-05)
4.2.10.3 Conformance . 11
4.2.11 Receiver maximum usable sensitivity . 11
4.2.11.1 Definition . 11
4.2.11.2 Limits . 11
4.2.11.3 Conformance . 11
4.2.12 Receiver co-channel rejection . 11
4.2.12.1 Definition . 11
4.2.12.2 Limit . 12
4.2.12.3 Conformance . 12
4.2.13 Receiver adjacent channel selectivity . 12
4.2.13.1 Definition . 12
4.2.13.2 Limits . 12
4.2.13.3 Conformance . 12
4.2.14 Receiver spurious response rejection . 12
4.2.14.1 Definition . 12
4.2.14.2 Limit . 12
4.2.14.3 Conformance . 12
4.2.15 Receiver intermodulation response . 12
4.2.15.1 Definition . 12
4.2.15.2 Limit . 12
4.2.15.3 Conformance . 12
4.2.16 Receiver blocking or desensitization . 13
4.2.16.1 Definition . 13
4.2.16.2 Limit . 13
4.2.16.3 Conformance . 13
4.2.17 Receiver spurious emissions at the antenna . 13
4.2.17.1 Definition . 13
4.2.17.2 Limit . 13
4.2.17.3 Conformance . 13
4.2.18 Receiver cabinet radiated spurious emissions . 13
4.2.18.1 Definition . 13
4.2.18.2 Limit . 13
4.2.18.3 Conformance . 13
4.2.19 DSC receiver maximum usable sensitivity . 13
4.2.19.1 Definition . 13
4.2.19.2 Limits . 13
4.2.19.3 Conformance . 14
4.2.20 DSC receiver co-channel rejection . 14
4.2.20.1 Definition . 14
4.2.20.2 Limits . 14
4.2.20.3 Conformance . 14
4.2.21 DSC receiver spurious response and blocking immunity . 14
4.2.21.1 Definition . 14
4.2.21.2 Limits . 14
4.2.21.3 Conformance . 14
5 Testing for compliance with technical requirements . 14
5.1 Test conditions, power supply and ambient temperatures . 14
5.2 Interpretation of the measurement results . 14
5.3 Essential radio test suites . 15
5.3.1 Transmitter frequency error . 15
5.3.2 Transmitter adjacent channel power . 15
5.3.3 Transmitter conducted spurious emissions conveyed to the antenna . 15
5.3.4 Transmitter cabinet radiation and conducted spurious emissions other than those conveyed to the
antenna . 15
5.3.5 Transient behaviour of the transmitter . 15
5.3.6 Transmitter carrier power . 15
5.3.7 Transmitter frequency deviation . 16
5.3.8 DSC frequency error (demodulated DSC signal). 16
5.3.9 DSC modulation index. 16
5.3.10 DSC modulation rate . 16
5.4 Other test suites . 16
ETSI
5 Draft ETSI EN 301 025-2 V1.5.0 (2013-05)
5.4.1 General . 16
5.4.2 Receiver maximum usable sensitivity . 16
5.4.3 Receiver co-channel rejection . 16
5.4.4 Receiver adjacent channel selectivity . 16
5.4.5 Receiver spurious response rejection . 16
5.4.6 Receiver intermodulation response . 16
5.4.7 Receiver blocking or desensitization . 17
5.4.8 Receiver spurious emissions at the antenna . 17
5.4.9 Receiver cabinet radiated spurious emissions . 17
5.4.10 DSC receiver maximum usable sensitivity . 17
5.4.11 DSC receiver co-channel rejection . 17
5.4.12 DSC receiver spurious response and blocking immunity . 17
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 18
History . 20
ETSI
6 Draft ETSI EN 301 025-2 V1.5.0 (2013-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This draft Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote
phase of the ETSI standards EN Approval Procedure.
The present document has been produced by ETSI in response to mandate M/284 from the European Commission
issued under Directive 98/34/EC [i.2] as amended by Directive 98/48/EC [i.5].
The title and reference to the present document are intended to be included in the publication in the Official Journal of
the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.1].
See article 5.1 of Directive 1999/5/EC [i.1] for information on presumption of conformity and Harmonised Standards or
parts thereof the references of which have been published in the Official Journal of the European Union.
The requirements relevant to Directive 1999/5/EC [i.1] are summarised in annex A.
The present document is part 2 of a multi-part deliverable covering the VHF radiotelephone equipment for general
communications and associated equipment for Class "D" Digital Selective Calling (DSC), as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive";
Part 3: "Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Directive".
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.1]. The
modular structure is shown in EG 201 399 [i.4].
ETSI
7 Draft ETSI EN 301 025-2 V1.5.0 (2013-05)
1 Scope
The present document covers the minimum requirements for general communication for shipborne fixed installations using
a VHF radiotelephone operating in certain frequency bands allocated to the maritime mobile service using either 25 kHz
or 25 kHz and 12,5 kHz channels with associated equipment for DSC - class D.
The present document is intended to cover the provisions of Directive 1999/5/EC [i.1] (R&TTE Directive) article 3.2,
which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the R&TTE Directive [i.1] may apply to equipment within the scope of the present
document.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, th
...
Harmonized European Standard
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
VHF radiotelephone equipment for general communications
and associated equipment for Class "D"
Digital Selective Calling (DSC);
Part 2: Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive
2 ETSI EN 301 025-2 V1.5.1 (2013-09)
Reference
REN/ERM-TG26-101-2
Keywords
DSC, maritime, radio, traffic, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2013.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 ETSI EN 301 025-2 V1.5.1 (2013-09)
Contents
Intellectual Property Rights . 6
Foreword . 6
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions and abbreviations . 8
3.1 Definitions . 8
3.2 Abbreviations . 8
4 Technical requirements specifications . 8
4.1 Environmental profile . 8
4.2 Conformance requirements . 9
4.2.1 Transmitter frequency error . 9
4.2.1.1 Definition . 9
4.2.1.2 Limits . 9
4.2.1.3 Conformance . 9
4.2.2 Transmitter adjacent channel power . 9
4.2.2.1 Definition . 9
4.2.2.2 Limits . 9
4.2.2.3 Conformance . 9
4.2.3 Transmitter conducted spurious emissions conveyed to the antenna . 9
4.2.3.1 Definition . 9
4.2.3.2 Limit . 9
4.2.3.3 Conformance . 9
4.2.4 Transmitter cabinet radiation and conducted spurious emissions other than those conveyed to the
antenna . 9
4.2.4.1 Definitions . 9
4.2.4.2 Limits . 10
4.2.4.3 Conformance . 10
4.2.5 Transient frequency behaviour of the transmitter . 10
4.2.5.1 Definitions . 10
4.2.5.2 Limits . 10
4.2.5.3 Conformance . 10
4.2.6 Transmitter carrier power . 10
4.2.6.1 Definition . 10
4.2.6.2 Limit . 10
4.2.6.3 Conformance . 10
4.2.7 Transmitter frequency deviation . 10
4.2.7.1 Definition . 10
4.2.7.2 Limit . 10
4.2.7.3 Conformance . 10
4.2.8 DSC frequency error (demodulated DSC signal). 10
4.2.8.1 Definition . 10
4.2.8.2 Limit . 11
4.2.8.3 Conformance . 11
4.2.9 DSC modulation index. 11
4.2.9.1 Definition . 11
4.2.9.2 Limit . 11
4.2.9.3 Conformance . 11
4.2.10 DSC modulation rate . 11
4.2.10.1 Definition . 11
4.2.10.2 Limit . 11
ETSI
4 ETSI EN 301 025-2 V1.5.1 (2013-09)
4.2.10.3 Conformance . 11
4.2.11 Receiver maximum usable sensitivity . 11
4.2.11.1 Definition . 11
4.2.11.2 Limits . 11
4.2.11.3 Conformance . 11
4.2.12 Receiver co-channel rejection . 11
4.2.12.1 Definition . 11
4.2.12.2 Limit . 12
4.2.12.3 Conformance . 12
4.2.13 Receiver adjacent channel selectivity . 12
4.2.13.1 Definition . 12
4.2.13.2 Limits . 12
4.2.13.3 Conformance . 12
4.2.14 Receiver spurious response rejection . 12
4.2.14.1 Definition . 12
4.2.14.2 Limit . 12
4.2.14.3 Conformance . 12
4.2.15 Receiver intermodulation response . 12
4.2.15.1 Definition . 12
4.2.15.2 Limit . 12
4.2.15.3 Conformance . 12
4.2.16 Receiver blocking or desensitization . 13
4.2.16.1 Definition . 13
4.2.16.2 Limit . 13
4.2.16.3 Conformance . 13
4.2.17 Receiver spurious emissions at the antenna . 13
4.2.17.1 Definition . 13
4.2.17.2 Limit . 13
4.2.17.3 Conformance . 13
4.2.18 Receiver cabinet radiated spurious emissions . 13
4.2.18.1 Definition . 13
4.2.18.2 Limit . 13
4.2.18.3 Conformance . 13
4.2.19 DSC receiver maximum usable sensitivity . 13
4.2.19.1 Definition . 13
4.2.19.2 Limits . 13
4.2.19.3 Conformance . 14
4.2.20 DSC receiver co-channel rejection . 14
4.2.20.1 Definition . 14
4.2.20.2 Limits . 14
4.2.20.3 Conformance . 14
4.2.21 DSC receiver spurious response and blocking immunity . 14
4.2.21.1 Definition . 14
4.2.21.2 Limits . 14
4.2.21.3 Conformance . 14
5 Testing for compliance with technical requirements . 14
5.1 Test conditions, power supply and ambient temperatures . 14
5.2 Interpretation of the measurement results . 14
5.3 Essential radio test suites . 15
5.3.1 Transmitter frequency error . 15
5.3.2 Transmitter adjacent channel power . 15
5.3.3 Transmitter conducted spurious emissions conveyed to the antenna . 15
5.3.4 Transmitter cabinet radiation and conducted spurious emissions other than those conveyed to the
antenna . 15
5.3.5 Transient behaviour of the transmitter . 15
5.3.6 Transmitter carrier power . 15
5.3.7 Transmitter frequency deviation . 16
5.3.8 DSC frequency error (demodulated DSC signal). 16
5.3.9 DSC modulation index. 16
5.3.10 DSC modulation rate . 16
5.4 Other test suites . 16
ETSI
5 ETSI EN 301 025-2 V1.5.1 (2013-09)
5.4.1 General . 16
5.4.2 Receiver maximum usable sensitivity . 16
5.4.3 Receiver co-channel rejection . 16
5.4.4 Receiver adjacent channel selectivity . 16
5.4.5 Receiver spurious response rejection . 16
5.4.6 Receiver intermodulation response . 16
5.4.7 Receiver blocking or desensitization . 17
5.4.8 Receiver spurious emissions at the antenna . 17
5.4.9 Receiver cabinet radiated spurious emissions . 17
5.4.10 DSC receiver maximum usable sensitivity . 17
5.4.11 DSC receiver co-channel rejection . 17
5.4.12 DSC receiver spurious response and blocking immunity . 17
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 18
History . 20
ETSI
6 ETSI EN 301 025-2 V1.5.1 (2013-09)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to mandate M/284 from the European Commission
issued under Directive 98/34/EC [i.2] as amended by Directive 98/48/EC [i.5].
The title and reference to the present document are intended to be included in the publication in the Official Journal of
the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.1].
See article 5.1 of Directive 1999/5/EC [i.1] for information on presumption of conformity and Harmonised Standards or
parts thereof the references of which have been published in the Official Journal of the European Union.
The requirements relevant to Directive 1999/5/EC [i.1] are summarised in annex A.
The present document is part 2 of a multi-part deliverable covering the VHF radiotelephone equipment for general
communications and associated equipment for Class "D" Digital Selective Calling (DSC), as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive";
Part 3: "Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Directive".
National transposition dates
Date of adoption of this EN: 23 September 2013
Date of latest announcement of this EN (doa): 31 December 2013
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 June 2014
Date of withdrawal of any conflicting National Standard (dow): 30 June 2015
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.1]. The
modular structure is shown in EG 201 399 [i.4].
ETSI
7 ETSI EN 301 025-2 V1.5.1 (2013-09)
1 Scope
The present document covers the minimum requirements for general communication for shipborne fixed installations using
a VHF radiotelephone operating in certain frequency bands allocated to the maritime mobile service using either 25 kHz
or 25 kHz and 12,5 kHz channels with associated equipment for DSC - class D.
The present document is intended to cover the provisions of Directive 1999/5/EC [i.1] (R&TTE Directive) article 3.2,
which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the R&TTE Directive [i.1] may apply to equipment within the scope of the present
document.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
reference document (including any amendments) applies.
Referenced docu
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SULSDGDMRþDElectromagnetic compatibility and Radio spectrum Matters (ERM) - VHF radiotelephone equipment for general communications and associated equipment for Class D Digital Selective Calling (DSC) - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 301 025-2 Version 1.5.1SIST EN 301 025-2 V1.5.1:2013en01-november-2013SIST EN 301 025-2 V1.5.1:2013SLOVENSKI
STANDARD
Harmonized European Standard SIST EN 301 025-2 V1.5.1:2013
ETSI ETSI EN 301 025-2 V1.5.1 (2013-09) 2
Reference REN/ERM-TG26-101-2 Keywords DSC, maritime, radio, traffic, VHF ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2013. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 025-2 V1.5.1:2013
ETSI ETSI EN 301 025-2 V1.5.1 (2013-09) 3 Contents Intellectual Property Rights . 6 Foreword . 6 Introduction . 6 1 Scope . 7 2 References . 7 2.1 Normative references . 7 2.2 Informative references . 7 3 Definitions and abbreviations . 8 3.1 Definitions . 8 3.2 Abbreviations . 8 4 Technical requirements specifications . 8 4.1 Environmental profile . 8 4.2 Conformance requirements . 9 4.2.1 Transmitter frequency error . 9 4.2.1.1 Definition . 9 4.2.1.2 Limits . 9 4.2.1.3 Conformance . 9 4.2.2 Transmitter adjacent channel power . 9 4.2.2.1 Definition . 9 4.2.2.2 Limits . 9 4.2.2.3 Conformance . 9 4.2.3 Transmitter conducted spurious emissions conveyed to the antenna . 9 4.2.3.1 Definition . 9 4.2.3.2 Limit . 9 4.2.3.3 Conformance . 9 4.2.4 Transmitter cabinet radiation and conducted spurious emissions other than those conveyed to the antenna . 9 4.2.4.1 Definitions . 9 4.2.4.2 Limits . 10 4.2.4.3 Conformance . 10 4.2.5 Transient frequency behaviour of the transmitter . 10 4.2.5.1 Definitions . 10 4.2.5.2 Limits . 10 4.2.5.3 Conformance . 10 4.2.6 Transmitter carrier power . 10 4.2.6.1 Definition . 10 4.2.6.2 Limit . 10 4.2.6.3 Conformance . 10 4.2.7 Transmitter frequency deviation . 10 4.2.7.1 Definition . 10 4.2.7.2 Limit . 10 4.2.7.3 Conformance . 10 4.2.8 DSC frequency error (demodulated DSC signal). 10 4.2.8.1 Definition . 10 4.2.8.2 Limit . 11 4.2.8.3 Conformance . 11 4.2.9 DSC modulation index. 11 4.2.9.1 Definition . 11 4.2.9.2 Limit . 11 4.2.9.3 Conformance . 11 4.2.10 DSC modulation rate . 11 4.2.10.1 Definition . 11 4.2.10.2 Limit . 11 SIST EN 301 025-2 V1.5.1:2013
ETSI ETSI EN 301 025-2 V1.5.1 (2013-09) 4 4.2.10.3 Conformance . 11 4.2.11 Receiver maximum usable sensitivity . 11 4.2.11.1 Definition . 11 4.2.11.2 Limits . 11 4.2.11.3 Conformance . 11 4.2.12 Receiver co-channel rejection . 11 4.2.12.1 Definition . 11 4.2.12.2 Limit . 12 4.2.12.3 Conformance . 12 4.2.13 Receiver adjacent channel selectivity . 12 4.2.13.1 Definition . 12 4.2.13.2 Limits . 12 4.2.13.3 Conformance . 12 4.2.14 Receiver spurious response rejection . 12 4.2.14.1 Definition . 12 4.2.14.2 Limit . 12 4.2.14.3 Conformance . 12 4.2.15 Receiver intermodulation response . 12 4.2.15.1 Definition . 12 4.2.15.2 Limit . 12 4.2.15.3 Conformance . 12 4.2.16 Receiver blocking or desensitization . 13 4.2.16.1 Definition . 13 4.2.16.2 Limit . 13 4.2.16.3 Conformance . 13 4.2.17 Receiver spurious emissions at the antenna . 13 4.2.17.1 Definition . 13 4.2.17.2 Limit . 13 4.2.17.3 Conformance . 13 4.2.18 Receiver cabinet radiated spurious emissions . 13 4.2.18.1 Definition . 13 4.2.18.2 Limit . 13 4.2.18.3 Conformance . 13 4.2.19 DSC receiver maximum usable sensitivity . 13 4.2.19.1 Definition . 13 4.2.19.2 Limits . 13 4.2.19.3 Conformance . 14 4.2.20 DSC receiver co-channel rejection . 14 4.2.20.1 Definition . 14 4.2.20.2 Limits . 14 4.2.20.3 Conformance . 14 4.2.21 DSC receiver spurious response and blocking immunity . 14 4.2.21.1 Definition . 14 4.2.21.2 Limits . 14 4.2.21.3 Conformance . 14 5 Testing for compliance with technical requirements . 14 5.1 Test conditions, power supply and ambient temperatures . 14 5.2 Interpretation of the measurement results . 14 5.3 Essential radio test suites . 15 5.3.1 Transmitter frequency error . 15 5.3.2 Transmitter adjacent channel power . 15 5.3.3 Transmitter conducted spurious emissions conveyed to the antenna . 15 5.3.4 Transmitter cabinet radiation and conducted spurious emissions other than those conveyed to the antenna . 15 5.3.5 Transient behaviour of the transmitter . 15 5.3.6 Transmitter carrier power . 15 5.3.7 Transmitter frequency deviation . 16 5.3.8 DSC frequency error (demodulated DSC signal). 16 5.3.9 DSC modulation index. 16 5.3.10 DSC modulation rate . 16 5.4 Other test suites . 16 SIST EN 301 025-2 V1.5.1:2013
ETSI ETSI EN 301 025-2 V1.5.1 (2013-09) 5 5.4.1 General . 16 5.4.2 Receiver maximum usable sensitivity . 16 5.4.3 Receiver co-channel rejection . 16 5.4.4 Receiver adjacent channel selectivity . 16 5.4.5 Receiver spurious response rejection . 16 5.4.6 Receiver intermodulation response . 16 5.4.7 Receiver blocking or desensitization . 17 5.4.8 Receiver spurious emissions at the antenna . 17 5.4.9 Receiver cabinet radiated spurious emissions . 17 5.4.10 DSC receiver maximum usable sensitivity . 17 5.4.11 DSC receiver co-channel rejection . 17 5.4.12 DSC receiver spurious response and blocking immunity . 17 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 18 History . 20
ETSI ETSI EN 301 025-2 V1.5.1 (2013-09) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to mandate M/284 from the European Commission issued under Directive 98/34/EC [i.2] as amended by Directive 98/48/EC [i.5]. The title and reference to the present document are intended to be included in the publication in the Official Journal of the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.1]. See article 5.1 of Directive 1999/5/EC [i.1] for information on presumption of conformity and Harmonised Standards or parts thereof the references of which have been published in the Official Journal of the European Union. The requirements relevant to Directive 1999/5/EC [i.1] are summarised in annex A. The present document is part 2 of a multi-part deliverable covering the VHF radiotelephone equipment for general communications and associated equipment for Class "D" Digital Selective Calling (DSC), as identified below: Part 1: "Technical characteristics and methods of measurement"; Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive"; Part 3: "Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Directive".
National transposition dates Date of adoption of this EN: 23 September 2013 Date of latest announcement of this EN (doa): 31 December 2013 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
30 June 2014 Date of withdrawal of any conflicting National Standard (dow): 30 June 2015
Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.1]. The modular structure is shown in EG 201 399 [i.4]. SIST EN 301 025-2 V1.5.1:2013
ETSI ETSI EN 301 025-2 V1.5.1 (2013-09) 7 1 Scope The present document covers the minimum requirements for general communication for shipborne fixed installations using a VHF radiotelephone operating in certain frequency bands allocated to the maritime mobile service using either 25 kHz or 25 kHz and 12,5 kHz channels with associated equipment for DSC - class D. The present document is intended to cover the provisions of Directive 1999/5/EC [i.1] (R&TTE Directive) article 3.2, which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital r
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...