SIST EN 1903:2015
(Main)Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing
Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing
This European Standard specifies a test method that measures the dimensional changes of a plastic or rubber floor or wall covering bonded to a given substrate after accelerated ageing. The term "wall covering" does not include any type of wallpaper.
Klebstoffe - Prüfverfahren für Klebstoffe für Boden- und Wandbeläge aus Kunststoff oder Gummi - Bestimmung der Maßänderungen nach beschleunigter Alterung
Diese Europäische Norm legt ein Prüfverfahren zur Bestimmung der Maßänderungen von Boden oder Wandbelägen aus Kunststoff oder Gummi, die auf ein vorgegebenes Substrat geklebt sind und einer beschleunigten Alterung unterworfen wurden, fest. Die Benennung „Wandbelag“ umfasst keine Art von Papier-Wandtapeten.
Adhésifs - Méthodes d'essai des adhésifs aux revêtements de sol ou mural en plastique ou en caoutchouc - Determination des variations dimensionnelles après un vieillissement accéléré
La présente Norme européenne spécifie une méthode d'essai pour mesurer les modifications dimensionnelles d'un revêtement de sol ou mural en plastique ou en caoutchouc, collé sur un support donné après un vieillissement accéléré. Le terme « revêtement de mur » (ou « revêtement mural ») n’inclut aucun type de papier peint.
Lepila - Preskusna metoda za lepila za polimerne ali gumene talne in stenske obloge - Ugotavljanje sprememb mer po pospešenem staranju
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lepila - Preskusna metoda za lepila za polimerne ali gumene talne in stenske obloge - Ugotavljanje sprememb mer po pospešenem staranjuKlebstoffe - Prüfverfahren für Klebstoffe für Boden- und Wandbeläge aus Kunststoff oder Gummi - Bestimmung der Maßänderungen nach beschleunigter AlterungAdhésifs - Méthodes d'essai des adhésifs aux revêtements de sol ou mural en plastique ou en caoutchouc - Determination des variations dimensionnelles après un vieillissement accéléréAdhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 1903:2015SIST EN 1903:2015en,fr,de01-julij-2015SIST EN 1903:2015SLOVENSKI
STANDARDSIST EN 1903:20091DGRPHãþD
SIST EN 1903:2015
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1903
April 2015 ICS 83.180 Supersedes EN 1903:2008English Version
Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing
Adhésifs - Méthodes d'essai des adhésifs aux revêtements de sol ou mural en plastique ou en caoutchouc - Determination des variations dimensionnelles après un vieillissement accéléré
Klebstoffe - Prüfverfahren für Klebstoffe für Boden- und Wandbeläge aus Kunststoff oder Gummi - Bestimmung der Maßänderungen nach beschleunigter Alterung This European Standard was approved by CEN on 16 February 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1903:2015 ESIST EN 1903:2015
EN 1903:2015 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Principle .4 5 Apparatus and materials .4 6 Preparation of test specimens .7 6.1 Conditioning of fibre cement substrate.7 6.2 Conditioning of test covering .7 6.2.1 Room temperature storage .7 6.2.2 Elevated temperature pre-treatment .7 6.3 Sampling and conditioning of adhesive .7 6.4 Datum points .7 6.4.1 Fixing of gauge positions .7 6.4.2 Edge to edge measurements .7 6.5 Initial measurements of dimensions prior to bonding.7 6.6 Preparation of bonded test specimens .8 6.6.1 Cleaning .8 6.6.2 Application of adhesive .8 6.6.3 Bonding .8 7 Procedure .8 7.1 Preconditioning .8 7.2 Conditioning cycle (accelerated ageing) .8 7.3 Subsequent cycles .8 8 Evaluation and expression of results .9 9 Test report .9
SIST EN 1903:2015
EN 1903:2015 (E) 3 Foreword This document (EN 1903:2015) has been prepared by Technical Committee CEN/TC 193 “Adhesives”, the secretariat of which is held by AENOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2015 and conflicting national standards shall be withdrawn at the latest by October 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1903:2008. The main change in respect to EN 1903:2008 is the change of the roller dimensions. SAFETY PRECAUTIONS — Persons using this document should be familiar with the normal laboratory practice, if applicable. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory conditions. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 1903:2015
EN 1903:2015 (E) 4 1 Scope This European Standard specifies a test method that measures the dimensional changes of a plastic or rubber floor or wall covering bonded to a given substrate after accelerated ageing. The term “wall covering” does not include any type of wallpaper. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 923:2005+A1:2008, Adhesives - Terms and definitions EN 1067, Adhesives - Examination and preparation of samples for testing EN ISO 9142, Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142) EN ISO 15605, Adhesives - Sampling (ISO 15605) ISO 554, Standard atmospheres for conditioning and/or testing - Specifications 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 923:2005+A1:2008 and the following apply. 3.1 covering
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lepila - Preskusna metoda za lepila za polimerne ali gumene talne in stenske obloge - Ugotavljanje sprememb mer po pospešenem staranjuKlebstoffe - Prüfverfahren für Klebstoffe für Boden- und Wandbeläge aus Kunststoff oder Gummi - Bestimmung der Maßänderungen nach beschleunigter AlterungAdhésifs - Méthodes d'essai des adhésifs aux revêtements de sol ou mural en plastique ou en caoutchouc - Determination des variations dimensionnelles après un vieillissement accéléréAdhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:FprEN 1903kSIST FprEN 1903:2014en,fr,de01-oktober-2014kSIST FprEN 1903:2014SLOVENSKI
STANDARD
kSIST FprEN 1903:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 1903
August 2014 ICS 83.180 Will supersede EN 1903:2008English Version
Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing
Adhésifs - Méthodes d'essai des adhésifs aux revêtements de sol ou mural en plastique ou en caoutchouc - Determination des variations dimensionnelles après un vieillissement accéléré
Klebstoffe - Prüfverfahren für Klebstoffe für Boden- und Wandbeläge aus Kunststoff oder Gummi - Bestimmung der Maßänderungen nach beschleunigter Alterung This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 193.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 1903:2014 EkSIST FprEN 1903:2014
FprEN 1903:2014 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Principle .4 5 Apparatus and materials .4 6 Preparation of test specimens .6 6.1 Conditioning of fibre cement substrate.6 6.2 Conditioning of test covering .7 6.2.1 Room temperature storage .7 6.2.2 Elevated temperature pre-treatment .7 6.3 Sampling and conditioning of adhesive .7 6.4 Datum points .7 6.4.1 Fixing of gauge positions .7 6.4.2 Edge to edge measurements .7 6.5 Initial measurements of dimensions prior to bonding.7 6.6 Preparation of bonded test specimens .8 6.6.1 Cleaning .8 6.6.2 Application of adhesive .8 6.6.3 Bonding .8 7 Procedure .8 7.1 Preconditioning .8 7.2 Conditioning cycle (accelerated ageing) .8 7.3 Subsequent cycles .8 8 Evaluation and expression of results .8 9 Test report .9
kSIST FprEN 1903:2014
FprEN 1903:2014 (E) 3 Foreword This document (FprEN 1903:2014) has been prepared by Technical Committee CEN/TC 193 “Adhesives”, the secretariat of which is held by AENOR. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 1903:2008. The main change in respect to EN 1903:2008 is the change of the roller dimensions. SAFETY PRECAUTIONS — Persons using this document should be familiar with the normal laboratory practice, if applicable. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory conditions. kSIST FprEN 1903:2014
FprEN 1903:2014 (E) 4 1 Scope This European Standard specifies a test method that measures the dimensional changes of a plastic or rubber floor or wall covering bonded to a given substrate after accelerated ageing. The term “wall covering” does not include any type of wallpaper. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 923:2005+A1:2008, Adhesives - Terms and definitions EN 1067, Adhesives - Examination and preparation of samples for testing EN ISO 9142, Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142) EN ISO 15605, Adhesives - Sampling (ISO 15605) ISO 554, Standard atmospheres for conditioning and/or testing — Specifications 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 923:2005+A1:2008 and the following apply. 3.1 covering flexible resilient or textile floor covering or wall covering 3.2 adhesive for coverings adhesive which is intended to produce firm and durable bonds between coverings and various substrates 4 Principle This test method gives a measure of t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.