iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60966-4:1996

(Main)

Radio frequency and coaxial cable assemblies -- Part 4: Sectional specification for semi-rigid coaxial cable assemblies

Radio frequency and coaxial cable assemblies -- Part 4: Sectional specification for semi-rigid coaxial cable assemblies

Relates to semi-rigid coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). Establishes uniform requirements for testing the electrical, mechanical and environmental properties of semi-rigid coaxial cable assemblies composed of semi-rigid coaxial cables and coaxial connectors.

Konfektionierte Koaxial- und Hochfrequenz-Kabel -- Teil 4: Rahmenspezifikation für halbstarre konfektionierte Koaxialkabel

Ensembles de cordons coaxiaux et de cordons pour fréquences radioélectriques -- Partie 4: Spécification intermédiaire pour cordons coaxiaux semi-rigides

Concerne les cordons coaxiaux semi-rigides fonctionnant dans le mode électromagnétique transversal (TEM). Etablit des prescriptions uniformes pour l'essai des propriétés électriques, mécaniques et d'environnement des cordons coaxiaux semi-rigides composés de câbles coaxiaux semi-rigides et de connnecteurs coaxiaux.

Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies (IEC 966-4:1992)

General Information

Status
Withdrawn
Publication Date
30-Apr-1996
Withdrawal Date
31-Mar-2004
ICS
33.120.10 - Coaxial cables. Waveguides
Technical Committee
iTEL - Communication cables
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Apr-2004
Due Date
01-Apr-2004
Completion Date
01-Apr-2004
Ref Project
EN 60966-4:1994 - Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies

Relations

Replaced By
SIST EN 60966-4:2004 - Radio frequency and coaxial cable assemblies -- Part 4: Sectional specification for semi-rigid coaxial cable assemblies
Effective Date
06-May-2014
Replaced By
SIST EN 60966-4:2004 - Radio frequency and coaxial cable assemblies -- Part 4: Sectional specification for semi-rigid coaxial cable assemblies
Effective Date
07-Jun-2022
Replaced By
SIST EN 60966-4:2004 - Radio frequency and coaxial cable assemblies -- Part 4: Sectional specification for semi-rigid coaxial cable assemblies
Effective Date
28-Jan-2023

Buy Standard

EN 60966-4:1996EN 60966-4:1996
PreviousNext
Standard
EN 60966-4:1996
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60966-4:1996
01-maj-1996
Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for
semi-rigid coaxial cable assemblies (IEC 966-4:1992)
Radio frequency and coaxial cable assemblies -- Part 4: Sectional specification for semi-
rigid coaxial cable assemblies
Konfektionierte Koaxial- und Hochfrequenz-Kabel -- Teil 4: Rahmenspezifikation für
halbstarre konfektionierte Koaxialkabel
Ensembles de cordons coaxiaux et de cordons pour fréquences radioélectriques -- Partie
4: Spécification intermédiaire pour cordons coaxiaux semi-rigides
Ta slovenski standard je istoveten z: EN 60966-4:1994
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
SIST EN 60966-4:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60966-4:1996

---------------------- Page: 2 ----------------------

SIST EN 60966-4:1996

---------------------- Page: 3 ----------------------

SIST EN 60966-4:1996

---------------------- Page: 4 ----------------------

SIST EN 60966-4:1996

---------------------- Page: 5 ----------------------

SIST EN 60966-4:1996

---------------------- Page: 6 ----------------------

SIST EN 60966-4:1996

----------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 50290-4-1:2015(Main)
Communication cables - Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspects
EN 50290-4-1:2014

This Part 4-1 of EN 50290 gives the environmental conditions and safety aspects of symmetrical, coaxial and optical cables used for the infrastructure of communication and control networks.
It will be read in conjunction with EN 50290-1-1 and is completed by generic, sectional, family and detail specifications, as appropriate, to describe in a detailed manner each type of cable with its specific characteristics.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CLC/TR 50117-8:2013(Main)
Coaxial cables used in cabled distribution networks - Part 8 Repair and substitute of damaged buried cables
CLC/TR 50117-8:2013

This Technical Report describes the procedure to repair damaged CATV cables. The following coaxial cables are considered in this guide:
– Coaxial cables with semi air spaced dielectric
Outer conductor: copper band, longitudinal welded
– Coaxial cables foamed polyethylene or solid polyethylene dielectric
Outer conductor: copper band, longitudinal welded
– Coaxial cables foamed polyethylene or solid polyethylene dielectric
Outer conductor: Overlapped foil of copper or aluminium with braid
– Coaxial cables foamed polyethylene or solid polyethylene dielectric
Outer conductor: Overlapped foil of copper or aluminium without braid
– Coaxial cables foamed polyethylene dielectric
Outer conductor: Corrugated copper
This guide is a helpful tool for providers and installers to find out the extend and the effects of damaged cables and to achieve and to evaluate appropriate repair operation. For not buried cables, e.g. indoor cables, the application of this guide is analogous.

  • Technical report
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62037-4:2012(Main)
Passive r.f. and microwave devices, intermodulation level measurement - Part 4: Measurement of passive intermodulation in coaxial cables (IEC 62037-4:2012)
EN 62037-4:2012

This part of IEC 62037 defines test fixtures and procedures recommended for measuring levels of passive intermodulation generated by coaxial cables. Two dynamic test methods and a static test method are defined. All coaxial cables are subjected to the static and clamped cable loop dynamic test. Cables classified as flexible or semi-flexible are additionally subjected to the flexing tool dynamic test.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50441-2:2012(Main)
Cables for indoor residential telecommunication installations - Part 2: Screened cables - Grade 2
EN 45510-2-7:2002

This European Standard specifies the constructional details and performance requirements for cables for indoor Residential Cabling Systems characterized up to 100 MHz. Cables in this European Standard are based on the common design rules specified in EN 50290-2-1 and are specifically intended for supporting ICT and BCT applications (telephone, computer and TV services) as specified in EN 50173-4. The cables covered in this European Standard are intended to operate with voltages and currents normally encountered in communication systems. These cables are not intended to be used in conjunction with low impedance sources, for example, the electrical power supply of public utility mains. Cables covered in this European Standard may however be subjected to voltages of not more than 300 V a.c. or 450 V d.c and comply with the requirements of the Low Voltage Directive. The maximum current rating per conductor is 3 A/mm? unless otherwise specified in the relevant detail specification.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50441-1:2012(Main)
Cables for indoor residential telecommunication installations - Part 1: Unscreened cables - Grade 1
EN 45510-2-5:2002

This European Standard specifies the constructional details and performances requirements for cables for indoor residential cabling systems characterized up to 100 MHz. Cables in this European Standard are based on the common design rules specified in EN 50290-2-1 and are specifically intended for supporting ICT and BCT applications (telephone, computer and TV services) as specified in EN 50173-4. The cables covered in this European Standard are intended to operate with voltages and currents normally encountered in communications systems. These cables are not intended to be used in conjunction with low impedance sources, for example, the electrical power supply of public utility mains. Cables covered in this European Standard may however be subjected to voltages of not more than 300 V a.c. or 450 V d.c. and comply with the requirements of the Low Voltage Directive. The maximum current rating per conductor is 3 A/mm? unless otherwise specified in the relevant detail specification.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50441-4:2012(Main)
Cables for indoor residential telecommunication installations - Part 4: Cables up to 1 200 MHz - Grade 4
EN 45510-2-8:2004

This European Standard specifies the constructional details and performance requirements for cables for installation in indoor residential cabling systems characterized up to 1 200 MHz. Cables in this European Standard are based on the common design rules specified in EN 50290-2-1 and are specifically intended for supporting ICT and BCT applications (telephone, computer and TV services) as specified in EN 50173-4. The cables covered in this European Standard are intended to operate with voltages and currents normally encountered in communication systems. These cables are not intended to be used in conjunction with low impedance sources, for example, the electrical power supply of public utility mains. Cables covered in this European Standard may however be subjected to voltages of not more than 300 V a.c or 450 V d.c and comply with the requirements of the Low Voltage Directive. The maximum current rating per conductor is 3 A/mm? unless otherwise specified in the relevant detail specification.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 351.5 S1:2004(Main)
Rigid precision coaxial lines and their associated precision connectors - Part 5: 50 ohm 3,5 mm rigid precision coaxial line with provision for mounting connectors (IEC 60457-5:1984)
HD 351.5 S1:1986

Gives geometrical configuration of the rigid precision coaxial line and the provision mounting connectors.

  • Standardization document
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 351.2 S1:2004(Main)
Rigid precision coaxial lines and their associated precision connectors - Part 2: 50 ohm 7 mm rigid precision coaxial line and associated hermaphroditic precision coaxial connector (IEC 60457-2:1974)
HD 351.2 S1:1977

Describes the mechanical, electrical and environmental specifications of the 7 mm precision connector, the reflection coefficient and attenuation of which has to be measured up to 18 GHz.

  • Standardization document
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 351.4 S2:2004(Main)
Rigid precision coaxial and their associated precision connectors - Part 4: 21 mm rigid precision coaxial line and associated hermaphroditic precision coaxial connector - Characteristic impedance 50 ohm (Type 9/21) - Characteristic impedance 75 ohms (Type 6/21) (IEC 60457-4:1978)
HD 351.4 S2:1984

Describes the mechanical, electrical and environmental specifications of the 21 mm pecision connector, the reflection coefficient and attenuation of which have to be measured up to 6 GHz.

  • Standardization document
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 351.1 S1:2004(Main)
Rigid precision coaxial lines and their associated precision connectors - Part 1: General requirements and measuring methods (IEC 60457-1:1974)
HD 351.1 S1:1977

Includes general, mechanical, electrical and environmental requirements and specifies the procedure for rigid precision coaxial lines and their associated connectors.

  • Standardization document
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day