SIST EN 62037-4:2012

Passive r.f. and microwave devices, intermodulation level measurement - Part 4: Measurement of passive intermodulation in coaxial cables (IEC 62037-4:2012)

This part of IEC 62037 defines test fixtures and procedures recommended for measuring levels of passive intermodulation generated by coaxial cables. Two dynamic test methods and a static test method are defined. All coaxial cables are subjected to the static and clamped cable loop dynamic test. Cables classified as flexible or semi-flexible are additionally subjected to the flexing tool dynamic test.

Passive HF- und Mikrowellenbauteile, Messung des Intermodulationspegels - Teil 4: Messung der passiven Intermodulation in koaxialen Kabeln (IEC 62037-4:2012)

Dispositifs RF et à micro-ondes passifs, mesure du niveau d’intermodulation - Partie 4: Mesure de l’intermodulation passive dans les câbles coaxiaux (CEI 62037-4:2012)

La CEI 62037-4:2012 définit les dispositifs et les procédures d'essai recommandés pour mesurer les niveaux d'intermodulation passive générés par les câbles coaxiaux. Deux méthodes d'essais dynamiques et une méthode d'essai statique sont définies. Tous les câbles coaxiaux sont soumis à l'essai statique et à l'essai dynamique d'une boucle de câble fixée. Les câbles classés comme souples ou semi-souples sont en plus soumis à l'essai dynamique avec outil de flexion.

Pasivne radiofrekvenčne (rf) in mikrovalovne naprave, meritve intermodulacijskega nivoja - 4. del: Meritve pasivne intermodulacije v koaksialnih kablih (IEC 62037-4:2012)

Ta del standarda IEC 62037 določa preskusne vpenjalne naprave in postopke, ki so priporočljivi za merjenje ravni pasivne intermodulacije, ki jo proizvedejo koaksialni kabli. Opredeljene so dve dinamični preskusni metodi in ena statična preskusna metoda. Za vse koaksialne kable se opravi statični in dinamični preskus s pripeto kabelsko zanko. Pri kablih, ki so uvrščeni med prožne ali polprožne kable, se poleg tega opravi tudi dinamični preskus prožnosti.

General Information

• Status: Published
• Publication Date: 01-Oct-2012
• ICS: 33.120.10 - Coaxial cables. Waveguides
• ICS: 33.120.30 - RF connectors
• Technical Committee: iTEL - Communication cables
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 11-Sep-2012
• Due Date: 16-Nov-2012
• Completion Date: 02-Oct-2012
• Ref Project: EN 62037-4:2012 - Passive RF and microwave devices, intermodulation level measurement - Part 4: Measurement of passive intermodulation in coaxial cables

Relations

• Replaces: SIST EN 62037:2001 - RF connectors, connector cable assemblies and cables - Intermodulation level measurement
• Effective Date: 28-Jan-2023
• Revised: SIST EN 62037:2001 - RF connectors, connector cable assemblies and cables - Intermodulation level measurement
• Effective Date: 23-Jul-2014
• Revised: SIST EN 62037:2001 - RF connectors, connector cable assemblies and cables - Intermodulation level measurement
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62037-4:2012
01-november-2012
1DGRPHãþD
SIST EN 62037:2001
3DVLYQHUDGLRIUHNYHQþQHUILQPLNURYDORYQHQDSUDYHPHULWYH
LQWHUPRGXODFLMVNHJDQLYRMDGHO0HULWYHSDVLYQHLQWHUPRGXODFLMHYNRDNVLDOQLK
NDEOLK,(&
Passive r.f. and microwave devices, intermodulation level measurement - Part 4:
Measurement of passive intermodulation in coaxial cables (IEC 62037-4:2012)
Passive HF- und Mikrowellenbauteile, Messung des Intermodulationspegels - Teil 4:
Messung der passiven Intermodulation in koaxialen Kabeln (IEC 62037-4:2012)
Dispositifs RF et à micro-ondes passifs, mesure du niveau d’intermodulation - Partie 4:
Mesure de l’intermodulation passive dans les câbles coaxiaux (CEI 62037-4:2012)
Ta slovenski standard je istoveten z: EN 62037-4:2012
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
33.120.30 5DGLRIUHNYHQþQLNRQHNWRUML R.F. connectors
5)
SIST EN 62037-4:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62037-4:2012

---------------------- Page: 2 ----------------------

SIST EN 62037-4:2012

EUROPEAN STANDARD
EN 62037-4

NORME EUROPÉENNE
September 2012
EUROPÄISCHE NORM

ICS 33.040.20 Supersedes EN 62037:1999 (partially)


English version


Passive RF and microwave devices, intermodulation level measurement -
Part 4: Measurement of passive intermodulation in coaxial cables
(IEC 62037-4:2012)


Dispositifs RF et à micro-ondes passifs, Passive HF- und Mikrowellenbauteile,
mesure du niveau d’intermodulation - Messung des Intermodulationspegels -
Partie 4: Mesure de l’intermodulation Teil 4: Messung der passiven
passive dans les câbles coaxiaux Intermodulation in koaxialen Kabeln
(CEI 62037-4:2012) (IEC 62037-4:2012)




This European Standard was approved by CENELEC on 2012-08-28. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62037-4:2012 E

---------------------- Page: 3 ----------------------

SIST EN 62037-4:2012
EN 62037-4:2012 - 2 -
Foreword
The text of document 46/418/FDIS, future edition 1 of IEC 62037-4, prepared by IEC TC 46 "Cables,
wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62037-4:2012.
The following dates are fixed:
(dop) 2013-05-28
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-08-28
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This document supersedes EN 62037:1999 (PART).

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 62037-4:2012 was approved by CENELEC as a European
Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 62037-4:2012
- 3 - EN 62037-4:2012
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 62037-1 - Passive RF and microwave devices, EN 62037-1 -
intermodulation level measurement -
Part 1: General requirements
and measuring methods


IEC 62037-3 - Passive RF and microwave devices, EN 62037-3 -
intermodulation level measurement -
Part 3: Measurement of passive
intermodulation in coaxial connectors

---------------------- Page: 5 ----------------------

SIST EN 62037-4:2012

---------------------- Page: 6 ----------------------

SIST EN 62037-4:2012



IEC 62037-4

®


Edition 1.0 2012-07




INTERNATIONAL



STANDARD



















Passive RF and microwave devices, intermodulation level measurement –

Part 4: Measurement of passive intermodulation in coaxial cables




























INTERNATIONAL

ELECTROTECHNICAL

COMMISSION

PRICE CODE
K


ICS 33.040.20 ISBN 978-2-83220-287-6



  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 7 ----------------------

SIST EN 62037-4:2012
– 2 – 62037-4 © IEC:2012(E)
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Abbreviations . 5
4 Test fixtures . 5
5 Procedure. 7
5.1 General . 7
5.2 Dynamic test procedure – Clamped cable loop . 8
5.3 Dynamic test – Flexing tool . 8
5.4 Static test . 9
Annex A (informative) General test considerations . 10

Figure 1 – Dynamic test using clamped "U" bend in cable . 6
Figure 2 – Dynamic test using flexing tool . 6

Table 1 – Dimensions of the flexing tool . 7
Table 2 – Groove diameter . 7

---------------------- Page: 8 ----------------------

SIST EN 62037-4:2012
62037-4 © IEC:2012(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

PASSIVE RF AND MICROWAVE DEVICES,
INTERMODULATION LEVEL MEASUREMENT –

Part 4: Measurement of passive intermodulation in coaxial cables

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services ca
...