iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 14803:2020/kFprA1:2024

(Amendment)

Waste management - Identification and/or determination of the quantity of waste

Waste management - Identification and/or determination of the quantity of waste

This document specifies general requirements and verifications for methods of identification of waste containers and/or determination of the quantity of waste and other reusable materials including:
-   safety requirements;
-   interface requirements and performances;
-   data to be treated and their integrity.
This document is applicable to systems for handling containers conforming to the EN 840 series.
Although this document does not cover systems for handling containers not conforming to the EN 840 series, users are encouraged to apply the requirements of this document to these systems as far as possible.
This document is applicable to systems both for billing and not for billing.
This document is applicable to systems both for billing and not for billing.

Abfallwirtschaft - Identifikation und/oder Mengenbestimmung von Abfall

Gestion des déchets - Identification et/ou détermination de la quantité de déchets

Ravnanje z odpadki - Identifikacija in/ali ugotavljanje količine odpadkov - Dopolnilo A1

General Information

Status
Not Published
Public Enquiry End Date
05-May-2024
ICS
13.030.01 - Wastes in general
13.030.40 - Installations and equipment for waste disposal and treatment
Technical Committee
I13 - Imaginarni 13
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
11-Nov-2024
Due Date
16-Nov-2024
Completion Date
11-Nov-2024
Ref Project
EN 14803:2020/FprA1 - Waste management - Identification and/or determination of the quantity of waste

Relations

Merged Into
SIST EN 14803:2020+A1:2025 - Waste management - Identification and/or determination of the quantity of waste
Effective Date
04-Sep-2024
Amends
SIST EN 14803:2020 - Identification and/or determination of the quantity of waste
Effective Date
14-Jun-2023

Buy Standard

EN 14803:2020/oprA1:2024EN 14803:2020/oprA1:2024
PreviousNext
Draft
EN 14803:2020/oprA1:2024
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
SIST EN 14803:2020/oprA1:2024
01-maj-2024
Ravnanje z odpadki - Identifikacija in/ali ugotavljanje količine odpadkov
Waste management - Identification and/or determination of the quantity of waste
Abfallwirtschaft - Identifikation und/oder Mengenbestimmung von Abfall
Gestion des déchets - Identification et/ou détermination de la quantité de déchets
Ta slovenski standard je istoveten z: EN 14803:2020/prA1
ICS:
13.030.01 Odpadki na splošno Wastes in general
SIST EN 14803:2020/oprA1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN 14803:2020/oprA1:2024
SIST EN 14803:2020/oprA1:2024
DRAFT
EUROPEAN STANDARD
EN 14803:2020
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
January 2024
ICS 13.030.40
English Version
Waste management - Identification and/or determination
of the quantity of waste
Gestion des déchets - Identification et/ou Abfallwirtschaft - Identifikation und/oder
détermination de la quantité de déchets Mengenbestimmung von Abfall
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 183.

This draft amendment A1, if approved, will modify the European Standard EN 14803:2020. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STAND
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 14803:2020+A1:2025(Main + Amendment)
Waste management - Identification and/or determination of the quantity of waste
EN 14803:2020+A1:2024

This document specifies general requirements and verifications for methods of identification of waste containers and/or determination of the quantity of waste and other reusable materials including:
-   safety requirements;
-   interface requirements and performances;
-   data to be treated and their integrity.
This document is applicable to systems for handling containers conforming to the EN 840 series.
Although this document does not cover systems for handling containers not conforming to the EN 840 series, users are encouraged to apply the requirements of this document to these systems as far as possible.
This document is applicable to systems both for billing and not for billing.
This document is applicable to systems both for billing and not for billing.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14803:2020+A1:2025(Main + Amendment)
Waste management - Identification and/or determination of the quantity of waste
EN 14803:2020+A1:2024

This document specifies general requirements and verifications for methods of identification of waste containers and/or determination of the quantity of waste and other reusable materials including:
-   safety requirements;
-   interface requirements and performances;
-   data to be treated and their integrity.
This document is applicable to systems for handling containers conforming to the EN 840 series.
Although this document does not cover systems for handling containers not conforming to the EN 840 series, users are encouraged to apply the requirements of this document to these systems as far as possible.
This document is applicable to systems both for billing and not for billing.
This document is applicable to systems both for billing and not for billing.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14356:2024(Main)
Dentistry - Duplicating material (ISO 14356:2024)
EN ISO 14356:2024

ISO 14356:2002 specifies requirements and tests for the duplicating materials used in dentistry which are primarily intended for forming flexible moulds needed to produce positive refractory investment copies of properly blocked-out master models.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ES 201 873-1 V4.16.1:2025(Main)
Methods for Testing and Specification (MTS) - The Testing and Test Control Notation version 3 - Part 1: TTCN-3 Core Language
ETSI ES 201 873-1 V4.16.1 (2024-10)

RES/MTS-201873-1v4.16.1

  • Standard
    395 pages
    English language
    sale 15% off
  • Standard
    395 pages
    English language
    sale 15% off
  • Standardization document
    395 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63296-2:2024(Main)
Portable multimedia equipment - Determination of battery duration - Part 2: Headphones and earphones with active noisecancelling functions (IEC 63296-2:2023)
EN IEC 63296-2:2024

IEC 63296-2:2023 is applicable to active acoustic noise-cancelling headphones and earphones that have the function of reducing the ambient noise heard by the user by the level of the output sound from the transducer, which is generated by the ambient noise detection microphone and the noise reduction signal processing circuit.
This document covers headphones and earphones to be worn over-the-ear or in-ear, all of which are referred to as "headphones" in this document.
This document specifies the terms and definitions relating to battery duration of this type of headphones and the measurement and evaluation methods.
The noise-detection microphones are mounted in the body, on the surface, or on an accessory of the headphones. Signal-processing circuits are analogue and digital electronic circuits.
This document does not deal with equipment intended for hearing protection. It is also not applicable to music players, recorders, etc. that have a noise-cancelling function.
The battery duration measurement methods can be applied to headphones having no active noise-cancelling function.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14071:2024(Main)
Environmental management - Life cycle assessment - Critical review processes and reviewer competencies (ISO 14071:2024)
EN ISO 14071:2024

ISO/TS 14071:2014 provides additional specifications to ISO 14040:2006 and ISO 14044:2006. It provides requirements and guidelines for conducting a critical review of any type of LCA study and the competencies required for the review.
ISO/TS 14071:2014 provides:
details of a critical review process, including clarification with regard to ISO 14044:2006;
guidelines to deliver the required critical review process, linked to the goal of the life cycle assessment (LCA) and its intended use;
content and deliverables of the critical review process;
guidelines to improve the consistency, transparency, efficiency and credibility of the critical review process;
the required competencies for the reviewer(s) (internal, external and panel member);
the required competencies to be represented by the panel as a whole.
ISO/TS 14071:2014 does not cover the applications of LCA.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14803:2020+A1:2025(Main + Amendment)
Waste management - Identification and/or determination of the quantity of waste
EN 14803:2020+A1:2024

This document specifies general requirements and verifications for methods of identification of waste containers and/or determination of the quantity of waste and other reusable materials including:
-   safety requirements;
-   interface requirements and performances;
-   data to be treated and their integrity.
This document is applicable to systems for handling containers conforming to the EN 840 series.
Although this document does not cover systems for handling containers not conforming to the EN 840 series, users are encouraged to apply the requirements of this document to these systems as far as possible.
This document is applicable to systems both for billing and not for billing.
This document is applicable to systems both for billing and not for billing.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14986:2024(Main)
Design of fans working in potentially explosive atmospheres
EN 14986:2024

1.1   This document specifies the constructional requirements for fans constructed to Group II G (of explosion groups IIA, IIB and hydrogen) categories 1, 2 and 3, and Group II D categories 2 and 3, intended for use in explosive atmospheres.
NOTE 1   Operation conditions for the different categories of fans used in this document are defined in Clause 4.
NOTE 2   For category 1 D fans, requirements provided in this document are not sufficient to ensure safety. In addition, explosion protection measures as specified in EN 1127 1:2019 are required to prevent ignition in the case of rare malfunctions.
NOTE 3   Technical requirements for explosion group IIC (other than hydrogen) are not given in this document. Where such atmospheres are present, additional explosion protection measures as specified in EN 1127 1:2019 can be needed.
1.2   This document does not apply to group I fans (fans for mining), cooling fans or impellers on rotating electrical machines, cooling fans or impellers on internal combustion engines, vehicles or electric motors.
NOTE 1   Requirements for group I fans are given in EN ISO/IEC 80079 38:2016.
NOTE 2   The requirements for electrical parts are covered by references to electrical equipment standards.
1.3   This document specifies requirements for design, construction, testing and marking of complete fan units intended for use in potentially explosive atmospheres in air containing gas, vapour, mist and/or dusts. Such atmospheres can exist inside (the conveyed atmosphere (flammable or not)), outside, or inside and outside of the fan.
NOTE   This document covers mechanical equipment, in particular fans. The “protection concept” as specified in EN ISO 80079 37:2016 is constructional safety. Requirements for marking are given in EN ISO 80079 37:2016.
1.4   This document is applicable to fans working in ambient atmospheres and with normal atmospheric conditions at the inlet, having
—   absolute pressures ranging from 0,8 bar to 1,1 bar,
—   and temperatures ranging from −20 °C to +60 °C,
—   and maximum volume fraction of 21 % oxygen content,
—   and an aerodynamic energy increase of less than 25 kJ/kg.
NOTE 1   25 kJ/kg is equivalent to 30 kPa at inlet density of 1,2 kg/m3.
This document can also be helpful for the design, construction, testing and marking of fans intended for use in atmospheres outside the validity range stated above or in cases where other material pairings need to be used. In this case, the ignition risk assessment, ignition protection provided, additional testing (if necessary), manufacturer's marking, technical documentation and instructions to the user, clearly demonstrate and indicate the equipment's suitability for the conditions the fan can encounter.
NOTE 2   Temperatures below −20°C can be considered. Material suitability can require specific evaluation for these temperatures. With lower temperature the explosion pressure increases, which leads to increased test pressures (see A.3) and can require specific testing. Although the standard atmospheric conditions in EN ISO 80079 36:2016 give a temperature range for the atmosphere of −20 °C to +60 °C the normal ambient temperature range for the equipment is −20 °C to +40 °C unless otherwise specified and marked.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18562-1:2024(Main)
Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 1: Evaluation and testing within a risk management process (ISO 18562-1:2024)
EN ISO 18562-1:2024

ISO 18562-1:2017 specifies:
- the general principles governing the biological evaluation within a risk management process of the gas pathways of a medical device, its parts or accessories, which are intended to provide respiratory care or supply substances via the respiratory tract to a patient in all environments;
- the general categorization of gas pathways based on the nature and duration of their contact with the gas stream;
- the evaluation of existing relevant data from all sources;
- the identification of gaps in the available data set on the basis of a risk analysis;
- the identification of additional data sets necessary to analyse the biological safety of the gas pathway;
- the assessment of the biological safety of the gas pathway.
ISO 18562-1:2017 covers general principles regarding biocompatibility assessment of medical device materials, which make up the gas pathway, but does not cover biological hazards arising from any mechanical failure, unless the failure introduces a toxicity risk (e.g. by generating particulates). The other parts of ISO 18562 cover specific tests that address potentially hazardous substances that are added to the respirable gas stream and establish acceptance criteria for these substances.
ISO 18562-1:2017 addresses potential contamination of the gas stream arising from the gas pathways within the medical device, which might then be conducted to the patient.
ISO 18562-1:2017 applies over the expected service life of the medical device in normal use and takes into account the effects of any intended processing or reprocessing.
ISO 18562-1:2017 does not address biological evaluation of the surfaces of medical devices that are in direct contact with the patient. The requirements for direct contact surfaces are found in the ISO 10993 series.
Medical devices, parts or accessories containing gas pathways that are addressed by this document include, but are not limited to, ventilators, anaesthesia workstations (including gas mixers), breathing systems, oxygen conserving equipment, oxygen concentrators, nebulizers, low-pressure hose assemblies, humidifiers, heat and moisture exchangers, respiratory gas monitors, respiration monitors, masks, mouth pieces, resuscitators, breathing tubes, breathing system filters and Y-pieces as well as any breathing accessories intended to be used with such medical devices. The enclosed chamber of an incubator, including the mattress, and the inner surface of an oxygen hood are considered to be gas pathways and are also addressed by this document.
ISO 18562-1:2017 does not address contamination already present in the gas supplied from the gas sources while medical devices are in normal use.
EXAMPLE Contamination arriving at the medical device from gas sources such as medical gas pipeline systems (including the non-return valves in the pipeline outlets), outlets of pressure regulators connected or integral to a medical gas cylinder, or room air taken into the medical device is not addressed by ISO 18562 (all parts).
Future parts might be added to address other relevant aspects of biological testing including additional contamination that might arise from the gas pathway because of the presence of drugs and anaesthetic agents added to the gas stream.
NOTE 1 Some authorities having jurisdiction require evaluation of these risks as part of a biological evaluation.
NOTE 2 This document has been prepared to address the relevant essential principles of safety and performance as indica

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16906:2025(Main)
Resilient floor coverings - Determination of seam strength (ISO 16906:2015)
EN ISO 16906:2024

This International Standard specifies a method for determining the strength of the seams of resilient
floor coverings when welded in accordance with the manufacturer’s instructions.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day