SIST EN 302 018-1 V1.2.1:2006
(Main)Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service; Part 1: Technical characteristics and test methods
Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service; Part 1: Technical characteristics and test methods
The present document applies to transmitting equipment for the frequency-modulated sound broadcasting service. The types of equipment covered by the present document are as follows:
- Transmitting equipment for frequency modulated sound broadcasting service operating in both Monophonic and Stereophonic operating in the frequency range 68 MHz to 108 MHz.
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) – Oddajniška oprema za zvokovne radiodifuzijske storitve s frekvenčno modulacijo (FM) – 1. del: Tehnične karakteristike in preskusne metode
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 302 018-1 V1.2.1:2006
01-junij-2006
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP (50 ±
2GGDMQLãNDRSUHPD]D]YRNRYQHUDGLRGLIX]LMVNHVWRULWYHVIUHNYHQþQRPRGXODFLMR
)0 ±GHO 7HKQLþQHNDUDNWHULVWLNHLQSUHVNXVQHPHWRGH
Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting
equipment for the Frequency Modulated (FM) sound broadcasting service; Part 1:
Technical characteristics and test methods
Ta slovenski standard je istoveten z: EN 302 018-1 Version 1.2.1
ICS:
33.060.20 Sprejemna in oddajna Receiving and transmitting
oprema equipment
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
33.170 Televizijska in radijska Television and radio
difuzija broadcasting
SIST EN 302 018-1 V1.2.1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 302 018-1 V1.2.1:2006
---------------------- Page: 2 ----------------------
SIST EN 302 018-1 V1.2.1:2006
ETSI EN 302 018-1 V1.2.1 (2006-03)
European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Transmitting equipment for the
Frequency Modulated (FM)
sound broadcasting service;
Part 1: Technical characteristics and test methods
---------------------- Page: 3 ----------------------
SIST EN 302 018-1 V1.2.1:2006
2 ETSI EN 302 018-1 V1.2.1 (2006-03)
Reference
REN/ERM-TG17WG2-004-1
Keywords
audio, broadcasting, FM, radio, terrestrial,
transmitter
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2006.
All rights reserved.
TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 302 018-1 V1.2.1:2006
3 ETSI EN 302 018-1 V1.2.1 (2006-03)
Contents
Intellectual Property Rights.6
Foreword.6
Introduction .6
1 Scope.7
2 References.7
3 Definitions, symbols and abbreviations .8
3.1 Definitions.8
3.2 Symbols.9
3.3 Abbreviations.9
4 Technical requirements specifications.10
4.1 Environmental profile.10
4.2 Transmitter input configuration.10
4.3 Transmitter output characteristics .10
4.3.1 Rated output power.10
4.3.1.1 Definition.10
4.3.1.2 Method of measurement.10
4.3.1.2.1 Initial conditions.10
4.3.1.2.2 Procedure.11
4.3.1.2.3 Test requirements.11
4.3.1.3 Limit.11
4.3.2 Frequency drift.11
4.3.2.1 Definition.11
4.3.2.2 Method of measurement.11
4.3.2.2.1 Initial conditions.11
4.3.2.2.2 Procedure.11
4.3.2.2.3 Test requirements.11
4.3.2.3 Limit.11
4.3.3 Deviation sensitivity stability .12
4.3.3.1 Definition.12
4.3.3.2 Method of measurement.12
4.3.3.2.1 Initial conditions.12
4.3.3.2.2 Procedure.12
4.3.3.2.3 Test requirements.12
4.3.3.3 Limit.12
4.3.4 Residual AM (Hum and noise) .13
4.3.4.1 Definition.13
4.3.4.2 Method of measurement.13
4.3.4.2.1 Initial conditions.13
4.3.4.2.2 Procedure.13
4.3.4.2.3 Test requirements.13
4.3.4.3 Limit.13
4.3.5 Synchronous AM (AM due to FM) .14
4.3.5.1 Definition.14
4.3.5.2 Method of measurement.14
4.3.5.2.1 Initial conditions.14
4.3.5.2.2 Procedure.14
4.3.5.2.3 Test requirements.14
4.3.5.3 Limit.14
4.3.6 Modulator performance (pulse response) .15
4.3.6.1 Definition.15
4.3.6.2 Method of measurement.15
4.3.6.2.1 Initial conditions.15
4.3.6.2.2 Procedure.15
ETSI
---------------------- Page: 5 ----------------------
SIST EN 302 018-1 V1.2.1:2006
4 ETSI EN 302 018-1 V1.2.1 (2006-03)
4.3.6.2.3 Test requirements.16
4.3.6.3 Limit.16
4.3.7 MPX intermodulation.16
4.3.7.1 Definition.16
4.3.7.2 Method of measurement.16
4.3.7.2.1 Initial conditions.16
4.3.7.2.2 Procedure.16
4.3.7.2.3 Test requirements.17
4.3.7.3 Limit.17
4.3.8 Deviation limiting.17
4.3.8.1 Definition.17
4.3.8.2 Method of measurement.17
4.3.8.2.1 Initial conditions.17
4.3.8.2.2 Procedure.17
4.3.8.2.3 Test requirements.18
4.3.8.3 Limit.18
4.3.9 FM Signal to Noise Ratio (SNR).18
4.3.9.1 Definition.18
4.3.9.2 Method of measurement.18
4.3.9.2.1 Initial conditions.18
4.3.9.2.2 Procedure.19
4.3.9.2.3 Test requirements.19
4.3.9.3 Limit.19
4.4 Antenna port measurements.19
4.4.1 Spurious emissions.19
4.4.1.1 Definition.19
4.4.1.2 Method of measurement (essential test suite) .19
4.4.1.2.1 Initial conditions.19
4.4.1.2.2 Procedure.20
4.4.1.2.3 Test requirements.20
4.4.1.3 Limit.20
4.4.2 Transmitter muting during frequency shift .21
4.4.2.1 Definition.21
4.4.2.2 Method of measurement (essential test suite) .21
4.4.2.2.1 Initial conditions.21
4.4.2.2.2 Procedure.22
4.4.2.2.3 Test requirements.22
4.4.2.3 Limit.22
4.4.3 Out-of-band emissions.22
4.4.3.1 Definition.22
4.4.3.2 Method of measurement (essential test suite) .22
4.4.3.2.1 Initial conditions.22
4.4.3.2.2 Procedure.23
4.4.3.2.3 Test requirements.23
4.4.3.3 Limit.24
4.5 Enclosure port measurements (radiated emissions).24
4.5.1 Cabinet radiation.24
4.5.1.1 Definition.24
4.5.1.2 Method of measurement (essential test suite) .24
4.5.1.2.1 Initial conditions.24
4.5.1.2.2 Procedure.25
4.5.1.2.3 Test requirements.25
4.5.1.3 Limit.25
4.6 Measurement uncertainties.26
Annex A (normative): General measuring arrangements.27
A.1 Testing arrangements for antenna port measurements .27
A.1.1 Testing arrangement for monophonic transmitters.27
A.1.2 Testing arrangement stereophonic transmitters .28
A.1.3 Test frequency range .29
A.1.4 Test modulating signal .29
ETSI
---------------------- Page: 6 ----------------------
SIST EN 302 018-1 V1.2.1:2006
5 ETSI EN 302 018-1 V1.2.1 (2006-03)
A.2 Testing arrangements for enclosure port (radiated emissions) measurements .31
A.3 Test load characteristics .31
Annex B (informative): Bibliography.32
History .33
ETSI
---------------------- Page: 7 ----------------------
SIST EN 302 018-1 V1.2.1:2006
6 ETSI EN 302 018-1 V1.2.1 (2006-03)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document is part 1 of a multi-part deliverable covering transmitting equipment for the Frequency
Modulated (FM) sound broadcasting service, as identified below:
Part 1: "Technical characteristics and test methods";
Part 2: "Harmonized EN under article 3.2 of the R&TTE Directive".
National transposition dates
Date of adoption of this EN: 24 February 2006
Date of latest announcement of this EN (doa): 31 May 2006
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 November 2006
Date of withdrawal of any conflicting National Standard (dow): 30 November 2006
Introduction
The present document covers a set of non-mandatory technical parameters that are considered to be the minimum
requirement for the design and operation of an FM sound broadcasting service.
Other documents directly associated with the present document:
- EN 302 018-2 [1];
- EN 301 489-11 [2].
ETSI
---------------------- Page: 8 ----------------------
SIST EN 302 018-1 V1.2.1:2006
7 ETSI EN 302 018-1 V1.2.1 (2006-03)
1 Scope
The present document applies to transmitting equipment for the frequency-modulated sound broadcasting service.
The types of equipment covered by the present document are as follows:
- Transmitting equipment for frequency modulated sound broadcasting service operating in both Monophonic
and Stereophonic operating in the frequency range 68 MHz to 108 MHz.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
[1] ETSI EN 302 018-2: "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service;
Part 2: Harmonized EN under article 3.2 of the R&TTE Directive".
[2] ETSI EN 301 489-11: "Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 11: Specific conditions for terrestrial sound broadcasting service transmitters".
[3] CENELEC EN 55011: "Industrial, scientific and medical (ISM) radio-frequency equipment -
Radio disturbance characteristics - Limits and methods of measurement".
[4] ITU-R Recommendation BS.468-4 (1986): "Measurement of audio-frequency noise voltage level
in sound broadcasting".
[5] IEC 60489-1: "Methods of measurement for radio equipment used in the mobile services.
Part 1: General definitions and standard conditions of measurement".
[6] ETSI TR 100 028 (all parts): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Uncertainties in the measurement of mobile radio equipment characteristics".
[7] ITU-R Recommendation SM.329: "Unwanted emissions in the spurious domain".
[8] ITU-R Recommendation BS.412: "Planning standards for terrestrial FM sound broadcasting at
VHF".
[9] ITU-R Recommendation BS.641: "Determination of radio-frequency protection ratios for
frequency-modulated sound broadcasting".
[10] ITU-R Recommendation BS.450-3 (2001): "Transmission standards for FM sound broadcasting at
VHF".
ETSI
---------------------- Page: 9 ----------------------
SIST EN 302 018-1 V1.2.1:2006
8 ETSI EN 302 018-1 V1.2.1 (2006-03)
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
antenna port: port of an apparatus which is designed, in normal operation, to be connected to an antenna using coaxial
cable
broadcasting service: radio communication service in which the transmissions are intended for direct reception by the
general public
NOTE: This service may include sound transmissions, television transmissions or other types of transmission.
channel L: left hand channel of a stereophonic signal
channel R: right hand channel of a stereophonic signal
cabinet radiation: radiation from an enclosure containing, equipment, excluding radiation from connected antennas or
cables
carrier power: average power supplied to the antenna port by a transmitter during one cycle taken under the condition
of no modulation
class of emission: set of characteristics of an emission, designated by standard symbols, e.g. type of modulation of the
main carrier, modulating signal, type of information to be transmitted, and also, if appropriate, any additional signal
characteristics
composite: See "Multiplex (MPX) signal".
dBc: decibels relative to the unmodulated carrier power of the emission
NOTE: In the cases which do not have a carrier, for example in some digital modulation schemes where the
carrier is not accessible for measurement, the reference level equivalent to dBc is decibels relative to the
mean power P.
difference signal : signal (S) theoretically equal to half the difference between the left (L) and right (R) stereophonic
signals. S = (L - R) / 2
enclosure port: physical boundary of the apparatus through which electromagnetic fields may radiate or impinge
NOTE: In the case of integral antenna equipment, this port is inseparable from the antenna port.
environmental profile: range of environmental conditions under which equipment within the scope of EN 302 018-1 is
required to comply with the provisions of EN 302 018-1
exclusion band: band of radio frequencies where no measurements are made
frequency tolerance: maximum permissible departure of the characteristic frequency of an emission from the assigned
frequency
6
NOTE: The frequency tolerance is expressed in parts per 10 or in Hz.
harmonic: component of order greater than 1 of the Fourier series of a periodic quantity
harmonic number: integral number given by the ratio of the frequency of a harmonic to the fundamental frequency
nd
(2 harmonic = 2 × fundamental frequency)
mean power: average power supplied to the antenna port by a transmitter during an interval of time sufficiently long
compared with the lowest frequency encountered in the modulation envelope taken under normal operating conditions
MultiPleX (MPX) signal: contains all information, including the pilot tone and any supplementary signal which is
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.